Jump to content
SAU Community

Hypergear Atr43G3 .63 Turbo Setup For Rb Engines, R32 Gtr/gtst 3" Exhausts X2 (Hks + Jasma), Gktech Deep Dish Steering Wheel


Recommended Posts

hey guys I have a few things to sell from my r32 gtst:

This is my current turbo setup which is still on the car but thinking about taking it off within the next week or 2. Would like to see if anyone was interested. Would like to sell it all in one setup but will sell separately if there is interest for all parts. All parts are in very good condition and have only been used for about 5000kms. This setup along with correct supporting mods will see you through to over 250rwkw on a rb20det very comfortably and near 300rwkw for a rb25. This set up made 225kw at 16psi with my rb20det with a few tune issues and worn out engine (rebuild was needed after tune).

Hypergear ATR43 G3 . 63: $1000 (current series, bush bearing, air intake not included)

Stainless steel highmount manifold: $150

dsc0620oi.jpg

dsc0621dd.jpg

Turbosmart Ultra Gate 38mm External Wastegate (black): $150

dsc0622x.jpg

3" custom exhaust from turbo back including highflow cat, mid muffler and twin pipes: $250 (not the prettiest exhaust but sounds awesome and flows well)

dsc0623tq.jpg

dsc0624u.jpg

or complete set up for: $1400

I also have a few other things for sale:

HKS Legal 3.5"-3" cat back exhaust system for r32 gtr (can fit gtst, few dings on tip as well as bottom muffler but no cracks or major damage, otherwise in good condition): $250

dsc0544a.jpg

Jasma approved 3" cat back exhaust for r32 gtr (can fit gtst and in very good condition): $150

dsc0614i.jpg

GKTECH steering wheel (does not come with boss, was fitted to my 32 gtst and can fit other models): $70

dsc0450n.jpg

located in western suburbs of VIC or can send smaller items interstate on buyers expense. please no low balling.

0432454387 or msg on here!

Guys heres a few more pictures of the turbo kit off the engine. gaskets and lines aren't included. turbo compressor has got a few small chips as you can see on the pics. because of this i've made the price of turbo kit for $1150 sent anywhere in australia without catback exhaust for interstaters or

$1200 pick up for the whole kit and exhaust (cat not included)!

dsc0635j.jpg

dsc0634o.jpg

dsc0638bx.jpg

dsc0637ul.jpg

dsc0636n.jpg

dsc0639f.jpgdsc0640l.jpg

dsc0633m.jpg

Edited by jakez88

whole turbo kit sold except for catback twin pipe 3" exhaust system.

the cat back i want out of the house. its just been taken off and look ugly but really made the sound of the car awesome. i'm not sure now if it will bolt on directly to a standard 32 system but i did line it up to the jasma 32 exhaust that i am selling and it followed the same hooks, exhaust line and length. in saying this i will let it go for $120.

dsc0656a.jpg

dsc0655x.jpg

Edited by jakez88
  • 2 weeks later...

hypergear turbo set up is sold!!!

exhausts are still for sale as well asthe gktech steering wheel!!!

the twin pipes exhaust system including free cat (cat looks to be made for the turbo set up/dump front) i will let go for $80!!! need it gone!

  • 2 months later...

everything is now sold except for twin pipe cat back exhaust. will also throw in the cat that came off the high mount set up which connected onto the twin pipe exhaust. $80!

i dont really know mate but i mean any exhaust shop will be able to fit it up properly but in terms of straight fit, no, hangers are different and length may vary.

  • 2 weeks later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • A few small updates since the previous post and lessons. I decided to do a little interior light upgrade on the 110. I quite like the iilumo items, even if they're a bit of a premium over other brands. You'll also note the Stedi Fogs, that will go into the S15 fog lights as I needed to match the bulbs since I got the new ones earlier. I hope they fit as the body is quite a bit longer than your normal bulb.  Annoyingly, I managed to trip the fuse, which normally wouldn't be an issue until I located the fuse. I can't say I've ever come across this. I had lucked out that someone nearby had a spare, but oddly enough Toyota dealerships seem to keep this in stock. I ordered some to keep in my stash and as luck would have it, someone else nearby tripped the same fuse so I passed on the favour.  I also did a little service on the 110 ahead of some additional work coming up. It's been annoying that Goleby's stopped carrying this particular HKS filter for the 110, so now I need to keep them on order from Japan. I also took the opportunity to install a bash plate and number plate riser. The plate riser is such a cheap but nice fix to help really tidy up the car. I'm tempted to now also replace my headlights, on this car. Both items were from Project Aero.    I also needed to replace the rear tyres on the 110, and after trying to get it aligned learnt that I need to replace some bushes in the front end, so that's next.  Closing out this update with a nicer picture as always! 
    • Yeah mate, never miss it.
    • Any going to watch World Time Attack at SMSP this year?
    • Appreciate the correction on the "ground", that will make a huge difference to looking at this. That makes complete sense about AF70/AF71 which is what I had come down to being the issue, one of these. I'll have another look in the ignition wiring when I get a chance next week. I'll also make up a jumper wire for running that AF73 test.  ECU is fine, relay itself is fine, pump harness is fine and the pump itself is fine. I am going to upgrade the Walbro 255 anyway with a DW300 I have since I need to replace the fuel sender and I'm going to upgrade the FPR with my chasebays kit ready for new plenum/injectors/dbw, but I'll get this working first. That's why this is so frustrating. 
×
×
  • Create New...