Jump to content
SAU Community

[Vic] Tamiya 1/10 Tt01-D Lipo Brushless Rx7 Rc Car With Mods. Can Post.


Recommended Posts

Up for sale is a fast Tamiya TT01-D Drift spec Remote control car settup, i have spent allot of money on this car and it is in very good condition so im sure the buyer will be very happy.

List of features,

*Full ball bearings

*Shaft driven 4wd, can easily make it rwd by removing the drive shaft.

* Drift spec oil shocks with alloy mounts.

* Adjustable front and rear upper arms & adjustable ride height.

* Upgraded to a Alloy Drive shaft

* Upgraded to a high performance Hobbywing EZrun 9 turn 4300kv Brushless motor & 35 amp Electronic Speed controller which you can tune the motor with.

* Upgraded to a Futuba Fm 27mhz controller and recievever ,

*Upgraded 58T Spur Gear and 22T Pinion Gear to increase top speed and acceleration, they are both installed on the car and are brandnew.

Will also provide 1 x Tamiya 23T Pinion Gear & 2 x 3A racing spur gears, 61T & 55T.

* 1 x Intellect 4000 mAh 25C LIPO Battery and 2x Venom 3700 NMIH Batteries.

* Brandnew set of 4 Jdm style black wheels with good offset/fitment and with brand new tyres.

* Another 2 sets of spare chrome wheels with some tread left.

*Upgraded to a Mazda FD RX7 body shell with

LED Lighting, very nice looking shell. The shell will need a respray as i painted it with an acrylic paint and it started flaking off straight away. You will need to use hobby paint.

This car drives great, it is a very fast car and is allot of fun. This can be used both for drifting or track.

As usaul you will need is to purchase your own lipo battery charger they are quite cheap.

If you have any questions dont hesitate to contact me.

Asking $300 for the lot.

Pick up from Glenroy (Melbourne) Can post Australia wide for an extra $20.

Call /sms 0422756270.

Time wasters will be ignored.

 

526087c20.jpg

12297dm20.jpg

2348m8g20.jpg

1988gnl20.jpg

06583fg20.jpg

0068amb20.jpg

274752b20.jpg

0068amb20.jpg

7736dk720.jpg

Edited by G4orce

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Hi, i’m making a rb25det coil loom for Vag short coil. Can anybody tell me which Ecu signal wire belong to coil number 1 and 2,3,4,5,6? The connecting switch in above pic is 8 wire i think white is for +12v and black for earth.
    • Was there ever a model of the Stagea m35 that didnt have a badge on the grill? I thought I saw that somewhere, some aero edition or something? I cant find it again? davemoto
    • Its a 2002 vr-x four VQ25DET, silver. Coil overs, lowered, polished alloys and sport exhaust. Bit of a project, was sitting in a shed for a while but runs and drives great.
    • I wasn’t able to replicate the sound anymore. It was a one time sound so maybe it was just coincidence but it was like small pebbles being dropped in a coke can.   should I try cleaning the MAF? It could be it’s functioning but dirty? I don’t know.
    • Update 4: Hi all. The car drives again! Haven't driven for long, only to store it in the garage again, but the test drive was successful. The coolant and oil leaks seem to be fixed for now. Temps on the engine were also very good, while moving I never even saw 80C water during the approx. 30 minute drive. Ate up all the coolant in the reservoir though so will have to fill that even more when I go to the car next time. One thing that pisses me off is that the RPM gauge is still f**ked, I even resoldered the board twice and used copper paste on the silly screws that are used as connections. Next time I take it out I'll take apart the board and fit new components, I'll see if I can get a replacement IC for it.  I have an appointment set for 22nd of September for the engine tune to 370hp. Alignment also still needs to be done. My hope is that I can get all the legal stuff over with by the end of this season. Anyone of you have advice regarding intercoolers? Currently there is an APEXI core fitted, one of those weird hybrid ones, 600x270x76. I don't think it's bad but it's not new and now I still have the chance to change it now to legally include it in the paperwork. Only issue is that the only options that would arrive in time are a HKS Type R intercooler or generic Ebay spec intercoolers comparable to a JustJap one. Ideally I'd order a Plazmaman but it takes over a month to receive which would mean making the car legal has to wait until next season. Would love to hear some input on this. Same story for my injectors, the previous owner was a nunce and put ID 1050x on the engine. They work but are obviously not ideal at "normal" power levels. But I don't see a reason to change them unless the tuner says it's necessary. I read online before buying a different exhaust that the top secret style rear diffusers won't fit due to the size of the rear resonators. My buddy and I made it work by slightly "adjusting the shape" of the mounting bracket and making some spacers out of 3d print for the mounting bolts. Fits like a charm. Just putting this here in case someone has this problem. Even the hefty HKS Silent Hi Power rear can fits without hitting anything.
×
×
  • Create New...