Jump to content
SAU Community

Recommended Posts

All parts will be available from 1st August 2015 an can be seen running an working. 1- selling as on lot power fc r33 modle, z32 afm, 850cc denso drop in injectors, 44mm turbonetics wastgate, holset hx35 turbo, pfc hand controller, ebay top mount manifold no cracks and a plumback 3 inch dump pipe to suit a vl but i think r33 run the same shape pipe. The computer is tuned for this setup on a standard rb25 engine no internal mods just a intercooler an a 3inch exhaust on e85 made 305kw on 16 pound an 280kw on 12 pound can provide dyno sheet for proof all u need to do is update ur fuel pump asking $2500 2- custom forward facing plenum started to polish it but gave up will also come with full polished standard botton half of manifold $400 3- r34 rb25 neodet head perfect working order has about 130xxx ks has never over heate or had any issues $450 4- rb25neo det bottem end has blown ringlands has abit of blowby suit rebuild $250 5- extrem ceremic brass button clutch with flywheel rated at 350kw is 8 months old an only seen about 2000ks paid 650 askin $350 6- apexi avcr boost controller full kit ive never got around to install it $200 7- splitfire coils ds001 to suit rb20 rb25s1 an rb26 only 4000ks use perfect condition i bought them new still hav there box an will also come with the coil loom which was bought new at the time i bought the injectors $450 other parts, pink sticker afm 50, r33 s1 tps 1year old $30, r33 oxygen sensor 1 year old $30, vl aluminum rb radiator $100, vl 3inch exhaust $100, r33 rb25 s1 loom modified for vl plugs into factory vl body loom an i think it needed to extra wires added for tacho an permanent power an alternator an started loom for rb25 modified for vl $200, vl mx7 gearbox suit rebuild doesn't grind but needs sycnros an has a wind $50, vl mx7 tailshaft $200 all parts located Guildford nsw but can post some parts

post-119725-0-98369800-1437910642_thumb.jpg

post-119725-0-86203500-1437910713_thumb.jpg

post-119725-0-26107300-1437910788_thumb.jpg

post-119725-0-11569000-1437910825_thumb.jpg

post-119725-0-57313900-1437910888_thumb.jpg

post-119725-0-25325900-1437910973_thumb.jpg

post-119725-0-98025700-1437911145_thumb.jpg

Hi mate, I will take the apexi avcr off you ok. Please either pm me or txt/call me on 0449939559. Thanks bro, talk soon. Mick

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Latest Posts

    • So sadly the fuel pump etc was not it. The pump and filter is new and it is still cutting around 4000 rpm. A read something about ABS/TCS (engine is from stagea and ECU too so no TCS) and i dont know for 100% that my car has ABS. It has ABS "cube" in engine bay but i dont think it works(or at least from my braking experience). Can be something like that?  I will be driving the car next week to Nistune tuner to properly see what is wrong...  
    • the Tomei LSD fluid with lsd kit. frustrated that it was shaking the car to crap and affecting everything else negatively, I pulled the diff last night, and removed the lsd carrier, could not find anything wrong, however it seem to be 100 locked up acceleration, and deacceleration, wondering if they sent me a 2 way not a 1.5??  either way I installed the stock open carrier back in place. test drove everything smooth as butter again. no shake, shutter, random, what felt like clutch slip and grab or drive shaft play, etc. something differently wrong in side the lsd. I might bother taking it apart (if possible) to figure out what's going on inside this carrier, as bought too long ago to return.  only draw back is its back to a one wheel wonder.
    • If there's oil in with the clutch, I hope it finds its way out even if that hole has a cover/grommet 😛 I don't want oil near my cars clutch! 😛 Interested to hear the answer about covering it, I'm assuming a bung for a gearbox from another car that has a grommet to suit.
×
×
  • Create New...