Jump to content
SAU Community

Recommended Posts

Good day,

Selling my Advanti Racing DV - Deriva 18x9.5 +22 5x114.3 wheels in gloss black as my mum no longer allows me to race. She says my lap times are too slow and to find another hobby. 

These wheels are flow formed / semi forged so they are very strong and light. They are made with excellent attention to detail.

Used these wheels for around <8000kms. Lightly scratched up 1/4 of one of the wheels as per pics, nothing major and it's been touched up. Needs a bit more of a clean. Fully 3D balanced.

Wheels will fit an R34 GTT and R33 GTS-T perfectly with a minor guard lip roll.

Comes with a set of Hankook R-S3 tyres in 245/40/18 build date 2013. Half of them are worn but still useable, as per pics.

Looking for $950. Inspections welcome. Delivery available at buyer's expense.


Thanks
TDB 0433543344

IMG_20180203_132535.jpg

IMG_20180203_132611.jpg

IMG_20180203_132625.jpg

IMG_20180203_132704.jpg

IMG_20180203_132713.jpg

IMG_20180203_132928.jpg

IMG_20180203_133125.jpg

  • Like 1

Good day,

I am back again. My mum isn't letting me keep any items off my GTT as a souvenir so I have to sell it.

Genuine Trust / Greddy 10 row quality oil cooler with a thermostat built into the oil filter sandwich plate.

Fits straight up to an R34 GTT using the driver's side bumper vent. Perfect shape and size for it depending on intercooler pipe route. Can easily be made to fit though, and any other car for that matter. Not shown in pic but included is an extra mounting bracket.

No leaks at all. Works perfectly.

You want a thermostatic oil cooler whether you drive your car on the street or track. Raises oil temp to optimum much quicker and holds it there.

Looking for $450. Inspections welcome. Delivery available at buyer's expense.


Thanks
TDB 0433543344

IMG_20180203_123611.jpg

IMG_20180203_123628.jpg

IMG_20180203_123638.jpg

IMG_20180203_123646.jpg

IMG_20180203_123657.jpg

IMG_20180203_123714.jpg

IMG_20180203_123724.jpg

IMG_20180203_123753.jpg

IMG_20180203_123802.jpg

IMG_20180203_123822.jpg

IMG_20180203_123959.jpg

Edited by TurboDoseBro

Hi hello,

Selling a genuine Whiteline rear sway bar for an R34 GTT. Might fit other R34s and R33s, not too sure.

If you want mad skids and doriftoes this is the way my brothers. You'll never drive straight again. I couldn't handle that lyf so I never used it.

Comes with Whiteline polyurethane mounts and stock end links (bushes worn on endlinks).

Looking for $40. Inspections welcome. Delivery available at buyers expense.


Thanks
TDB 0433543344

IMG_20180203_121345.jpg

IMG_20180203_121428.jpg

  • 2 months later...
On 5/8/2018 at 2:54 PM, RPR33 said:

wheels still for sale?

Hi mate sorry for late reply. Yes they are still for sale. Have not listed them elsewhere yet but will soon. Let me know if interested. Thanks!

  • 1 month later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Per Mark Roberts of Sonictune: Mark Robert Author At this time, no. No ETA either 2016-17 models. You will be able to purchase and install a 2018.5+ TCU though   TCU purchasing and pricing info! As we near the release of TCU tuning, I am going to answer some questions I get asked often.   What do I need for TCU tuning? At this time, you will need a 2018.5+ TCU to be able to tune. If you have a 2016-to early 2018, you will need to replace your TCU with the newer version. One good way to know if your TCU is good is if you have auto upshift in manual mode in 1st gear around 6500 rpms. If your manual 1st gear goes to 7k rpm and will hit the rev limiter unless you shift, you have the older TCU.   Why do I need to buy another ecu license/phone flash if I already have it on my ECU tune? The TCU is its own computer module. It is completely separate from the ECU. Because of this, you will be required to purchase a TCU license and, if your tuner has it, the phone flash license required to tune it via phone/bluetooth.   Do I need TCU tuning? TCU tuning is NOT required. However, the faster your setup, the more it will assist in track and dragy time consistency.   If I’m ECU tuned by (tuner A) can I get my TCU tuned by (Tuner ? Yes, since it’s a different module and a completely separate flash, you can have two different tuners. However, it is highly recommend that you have both tuned by the same tuner. For me, my TCU tuning will directly complement my ECU tuning style and features and running my ECU and another TCU or vice versa MIGHT cause some issues. At this time and for the foreseeable future, I will only be tuning my current ECU tuned customers TCUs.     I have a SYVECS AWD controller. Do I still need it? Yes! The AWD controllers main job is to control your AWD system. However, with TCU tuning, you will no longer need the auto-shift function as that will be done through the TCU. The AWD controller will still be very beneficial for racers looking to maximize traction on the launch.     Shift schedule changes: holding gears longer at lower pedal input as well as max shift rpm changes. Please note, the new ECU race rom coming out will address 90% of the shitty drivability issues these cars have through custom maps from myself and Racebox—as well as others I am sure.   Increase shift speeds: as seen in the videos I’ve been posting, the TCU shifts much faster once tuned.   Increased shift pressures: as also seen in the videos, much firmer full throttle shifts.      
    • Per Mark Roberts of Sonictune:     Mark Robert Author At this time, no. No ETA either 2016-17 models. You will be able to purchase and install a 2018.5+ TCU though   TCU purchasing and pricing info! As we near the release of TCU tuning, I am going to answer some questions I get asked often.   What do I need for TCU tuning? At this time, you will need a 2018.5+ TCU to be able to tune. If you have a 2016-to early 2018, you will need to replace your TCU with the newer version. One good way to know if your TCU is good is if you have auto upshift in manual mode in 1st gear around 6500 rpms. If your manual 1st gear goes to 7k rpm and will hit the rev limiter unless you shift, you have the older TCU.   Why do I need to buy another ecu license/phone flash if I already have it on my ECU tune? The TCU is its own computer module. It is completely separate from the ECU. Because of this, you will be required to purchase a TCU license and, if your tuner has it, the phone flash license required to tune it via phone/bluetooth.   Do I need TCU tuning? TCU tuning is NOT required. However, the faster your setup, the more it will assist in track and dragy time consistency.   If I’m ECU tuned by (tuner A) can I get my TCU tuned by (Tuner ? Yes, since it’s a different module and a completely separate flash, you can have two different tuners. However, it is highly recommend that you have both tuned by the same tuner. For me, my TCU tuning will directly complement my ECU tuning style and features and running my ECU and another TCU or vice versa MIGHT cause some issues. At this time and for the foreseeable future, I will only be tuning my current ECU tuned customers TCUs.     I have a SYVECS AWD controller. Do I still need it? Yes! The AWD controllers main job is to control your AWD system. However, with TCU tuning, you will no longer need the auto-shift function as that will be done through the TCU. The AWD controller will still be very beneficial for racers looking to maximize traction on the launch.     Shift schedule changes: holding gears longer at lower pedal input as well as max shift rpm changes. Please note, the new ECU race rom coming out will address 90% of the shitty drivability issues these cars have through custom maps from myself and Racebox—as well as others I am sure.   Increase shift speeds: as seen in the videos I’ve been posting, the TCU shifts much faster once tuned.   Increased shift pressures: as also seen in the videos, much firmer full throttle shifts.      
    • The fancy pants red shock tower brace is finally incoming from MX5 Mania, getting it shipped from 'Merica has been a long and problematic process, and GWR, the 'Merican supplier will not ship directly to consumers outside of the US, Mania basically had to order a heap of them, the colour choice was silver, or red, and we all know anything red adds 5 killerwasps of dynotorques..... Whilst it does fit over a 2.5, and I've seen a few photos and videos of it being installed and fitting, google also says it might get real close to the FAB9 intake front runner, people in the US says it does fit with the FAB9 intake, except for one person who said it slightly touched.......so there is that.....LOL..... As it seems that I am the first in AU to have this combination of parts there's no local knowledge about fitment, so I'm just a willing guinea pig in this endeavour, I'll cross my fingers and toes and hope for the best In other news, I ordered stuff from China  on the same day I ordered the 23° silicone bend from Victoria, the stuff from China arrived a day ago, the 23° silicone bend is still travelling around Australia thanks to Australia Post, and "may" be here next week
    • Very good news...I contacted Racebox about it last night. My car is a 2016 so remains to be seen if it is compatible, requires a TCU swap, or is impossible.
    • What ECU are you running? This is probably the biggest question. If it's a PowerFC, I'd probably change the ECU and get something newer that will handle the injectors in a nicer way.
×
×
  • Create New...