Jump to content
SAU Community

Help! Car missing - Need New Exhuast Valve (Have Questions - labor prices/required)


Recommended Posts

Recently got my stock standard r33 from the compliancing workshop. Went in fine and came out missing pretty bad - car was missing @ stand still position at low revs, also stuggles to accelerate. Was told my mechanic that i'm goin to need new exhuast valves.

Compression test showed one cylinder was @ 115 and the other 5 were @ 170

Have put new sparkplugs, old ones looked fine when taken out.

Coil packs are working fine.

AFM is working fine.

The mechanic has pinned point that i require new exhuast valves. I only have very very basic mechanical knowledge, what is required to change the exhuast valves ... i was quoted $1500 for the whole job. What is involved ... and does the price sound right to get it the job done? Is this pretty tricky or through the right guidance a possible home job?

regards

bryanlee

Recently got my stock standard r33 from the compliancing workshop. Went in fine and came out missing pretty bad - car was missing @ stand still position at low revs, also stuggles to accelerate. Was told my mechanic that i'm goin to need new exhuast valves.  

Compression test showed one cylinder was @ 115 and the other 5 were @ 170

Get a second opinion. Based on your compression readings you have 5 good cylinders and one bad. You certainly shouldn't need to replace ALL the exhaust valves. Your mechanic should be able to identify the problem with the bad cylinder - the best way is a leakdown test.

If you have limited mechanical knowledge, best let someone do it for you.

Also I'd be asking some q's about why the car went into the shop running fine but came out running crap....usually doesn't 'just happen' like that....

yeah the workshop doesnt know either ... they r a decent bunch of blokes there. Nothing sus on the workshop. More on the vehicle. Mechanic of the workshop reckon its an electrical fault. But besides the coils, plugs, leads, afm or the ecu ... i cant see what the issue could be. Does $1500 sound right to get the exhuast valves changed? Its a fairly big job from what i heard ... understand the problem just occured overnight. Not through a span of time. What other problems could it be?

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • I’m not sure what happened I told them about sonic tunes free OTS tune and the next the I know .. I was booted..   To funny 
    • Yea - I mean I've seen my fuel pump which is decades old and uh, while I'm not saying this with real knowledge... but I sure get the ick at using anything in the fuel system that produced the state of that pump. Many years ago I went through multiple pumps (and strainers) before I dropped the tank to clean it out with extreme violence. I'm talking the car would do maybe 50km before coming to a halt, which resulted in me cleaning out the filter with some brake cleaner and going on my way. None of my stuff ever looked like what came out of your fuel tank. I don't think I'd be happy with it unless every single component was replaced (or at least checked/cleaned/confirmed to be clean here).
    • I'm not going to recommend an EBC pad. I don't like them. Just about anything else would suit me better. I've been using Intima pads for a while now.
    • Agreed, and in particular the earth strap that should go from the subframe to the chassis but it often broken or left off. There is a section in the R32 workshop manual you can follow for troubleshooting if you don't see anything suspicious, and depending where you are (there is no location on your user profile) you should be able to get your hands on a second hand replacement unit still if needed
    • Yeah they mention as a R34 for 2.5 Turbo...but then again thos "small" were also for R34 by that different site. But i look into it and that 310mm EBC is for R34 GTT. And by those you linked the specs are the same 🙂    EDIT: I found these on one site here: DBA 4000 series T3 DBA42304S They are 310mm...and it says are for R34GTT...are there good? EDIT2: ok they have pads too.  What "color" should i get for street use? I dont want/need some noisy ones...(and if they are not that dusty that is good too)
×
×
  • Create New...