Jump to content
SAU Community

Recommended Posts

well after looking around for awhile I decided what the hell I'll go all out and get the brant nemsis installed in my 95 gts25t... install was booked for thrusday, advised head office I don't have undercover parking is that a problem, no thats fine.

ok all ready to go, got a call thrusday morning by the installer at 8am, oh I'm sorry u don't have undercover parking I can't really do it, u'll have to bring car out to st albans (45 mins away) nice start to the day. install took 4-5 hours and installer didn't wire in boot protection as he said my boot light wasn't working and therefore he couldn't install it.... ok showed me how alarmed worked etc.. all good seemed to work well.

drove away after going to shops and getting petrol entering the pin number everytime I turned off car was beginning to give me the shits, but I guess thats the price you pay for security!

ended work went to drive home only to find installer had blown my dash and rear lights when he did install, got home and rang him in the morning, advised me he didn't do it was a fluke it happened at same time??? told me to check all the fuses.

ok checked all the fuses in the car, found the blown fuse and replaced it. turned on car alarm had shit its self and reverted back to factory settings or something no longer accepting my pin and now car is stuck in driveway and installer refuses to come out and fix it till monday.. so over all brant alarms great, brant contractors who do the installs > shocking!!!!

Link to comment
https://www.sau.com.au/forums/topic/5246-brant-nemsis-review/
Share on other sites

yeah it cost $1198 plus 100 for a central locking motor, friend says I got ripped with central locking motor cos r33's already have em, i dunno whole deals been pretty dodgy if u ask me. happy with alarm though finally have peace of mind

edit... oh apart from the fact alarm is working so well not even I can start car atm... :lol:

Link to comment
https://www.sau.com.au/forums/topic/5246-brant-nemsis-review/#findComment-80344
Share on other sites

HEy i got a nemesis too man.. i reckon its great.... the guy who installed it did a great job!!!

however the instruction manual thing is pretty crap.. just have to remember how to use it.. when the guy explains it to ya...

Hey if the pin code thing is annoyin ya... just put the thing in Valet mode... that way your alarm and immobilisers still work but u wont have to enter in the pin all the time.. then if ur gonna leave the car for ages.. then take it off valet mode and then the pin has to be entered to start the car... i highly recommend the nemesis... :D

Link to comment
https://www.sau.com.au/forums/topic/5246-brant-nemsis-review/#findComment-80649
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Oh, also, forgot to add these photos I believe.
    • Thought i'd update on this. I was able to get in contact with Craig Lieberman and later on Darryl Alison (owner of Kaizo Industries). Darryl was able to help me verify that my car was in fact one of theirs and is helping me find more info on mine !
    • There's restrictor pills in the stock boost control hoses. That's how they set the amount that was bled off and hence the "high" boost setting. The usual mod in the day was to remove it and send the "high" boost setting up to about 14 psi.
    • Thanks Duncan, that's the best info I've read. Furthermore after learning about the PCM programming side controlling the factory boost solenoid, the purpose of the solenoid is to "bleed" boost when pin 25 is earthed, thus allowing spring pressure in the wastegate actuator to overcome diaphragm boost pressure, thus closing or reducing the position of the wastegate flap creating more boost as the turbo is able to spin faster. It's pretty cool to see a designated Pill to do exactly this, would have liked to have seen it with a tiny filter over the end for those moments in vacuum.  The constant bleed pill has now been removed completely from the system and solenoid boost control has been restored once again.   Case closed 😂
    • The wideband reading is meaningless if it's not running. Why are you using shitty old sidefeeds on any engine, let alone a Neo? What manifold and fuel rail are you using to achieve that? Beyond that, can't help you with AEM stuff as I've never been their ECU/CAS combo.
×
×
  • Create New...