Jump to content
SAU Community

Pbr Fualt

Guest BIGBADBK

By Guest BIGBADBK,
in General Automotive Discussion

 Share

Recommended Posts

Guest BIGBADBK

Guest BIGBADBK

Posted
Posted

I've run the diagnostic check on my climate controll and it comes up with an error in the PBR. What is this. Does any one have a copy of the manual for the r32. the diagnostic check came from "The sky is the limit". My heater always seems to be on as hot air comes up through the front window vent anr the air con runs hot but the coolant temp is about 1 degre. Please help

Link to comment
https://www.sau.com.au/forums/topic/5589-pbr-fualt/
Share on other sites
  • 1 year later...
ebhatti Rookie

ebhatti

Posted
Posted

pbr relates to one of the motor actuators i think.

there is one behind the glove box (small black box) and

two under the drivers foot well by the clutch pedal.

iput the air con into diag mode and then flap mode and

watched to see if these motors worked ,found the one

by the clutch pedal not moving.took it apart put it back

together and it seems to have cured the fault .i now get

hot and cold again.

hope this helps...

Link to comment
https://www.sau.com.au/forums/topic/5589-pbr-fualt/#findComment-627211
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Latest Posts

    • Chupapy
      Coolant leak?

      By Chupapy · Posted

      Is it alright to top up with just another green coolant?
    • Songo
      New kid on the block

      By Songo · Posted

      thanks GTSboy. My confusion at the moment is i am trying to locate the ignition, ECU battery power and the ECU negative The closest thing i can find is the for the S15 on Page 8 of the Wiring Specialties web page https://drive.google.com/file/d/0B9F33_M_GgENQnZ6STMxVmVNd1E/view?resourcekey=0-eZ4nNRwRoqa1qvKlWWHm8A I cannot find the same diagram for the R33 RB25DET Series 2 dash plug pin out.... Do you know what the Pins? or know where i can find the same pinout diagram for the RB dash plug? Thanks for the advice on the box... i like a 6 speed so might be on the lookout or the box now.. a topic of discussion for another post...
    • Chupapy
      Coolant leak?

      By Chupapy · Posted

      Will have a look at that. I cant see any leaks 
    • GTSBoy
      Coolant leak?

      By GTSBoy · Posted

      Put another overflow bottle (ie, a 1.25 coke bottle or similar) under the overflow hose and see if it is being pushed out there or if it is disappearing into the engine.
    • GTSBoy
      New kid on the block

      By GTSBoy · Posted

      Staring on a stand is no issue. You just have to wire everything up, give it fuel and cross your fingers that the stand is robust enough. Arranging the inlet plumbing is often the hardest part, without any surrounding structure to hand some of it from. No need for coolant if you only want to run it for <1 minute. As to the gearbox - I think the little Aisin box is a bit stronger than the other small Nissan boxes that went behind SRs, but I wouldn't be too keen to test its limits with the torque of a boosted 25. I don't know if you can retain the box and the tailshaft. The box won't connect to the RB without an adapter of some sort, which is either a plate that will push the engine forward (which is not good for fitting it into the bay's available space) or push the box back, which messes with the box position and tailshaft length - OR - cut and shut work on the bellhousing, which is a long way from "least modification". I'd be buying a new 370Z 6 speed or similar, doing what has to be done to that to make it fit RB (ie, cut and shut bellhousing) and the requisite tailshaft custom/mods.
×
×
  • Create New...