Jump to content
SAU Community

HELP!!!! calling all aussie GTR owners

Dahtone Racing
 Share

Recommended Posts

SteveL Mentor

SteveL

Posted
Posted
hey guys

anyone here have an aussie delivered R32 GTR????

i need to ask any owners a few questions about their rear bumpers.

According to the Oz spec parts list the rear bumper 'finisher' has a different part number to the Jap version. Don't have access to FAST at the moment so can't check exactly what that is, but someone else should be able to.

Dahtone Racing Grand Master

Dahtone Racing

Posted
  • Author
Posted

silverR32 - im after a "rear bar finisher" as SteveL called it. i would just like to take measurements so i can get it made from CF or if anyone would like to lend one to me :) ill pay em for it or ill buy one if i can find one.

the engine is on hold till after the new year once all this holiday crap is finished things will start happening.

SteveL - thanks for that if you can get me the part number that would be great.

Guest two.06l

Guest two.06l

Posted
Posted
silverR32 - im after a "rear bar finisher" as SteveL called it. i would just like to take measurements so i can get it made from CF or if anyone would like to lend one to me :) ill pay em for it or ill buy one if i can find one.

 

the engine is on hold till after the new year once all this holiday crap is finished things will start happening.

 

SteveL - thanks for that if you can get me the part number that would be great.

part no. is 85021-J7400. vote for Stacey in coolest chick poll.(they called her two.02l, the bozo's). Paul...DIRTgarage.

http://www.skylinesaustralia.com/forums/sh...ead.php?t=59193

Guest two.06l

Guest two.06l

Posted
Posted
just called nissan and they said the part number was wrong :P

ill have to try again with the VIN number

why are spare parts guys always rude pricks

pm me your email and ill send you the nissan dealer service technical sheets for aust model. it is the correct part no. as you will see.(the s0ftc0ck probably entered it incorrectly)

dazmo Proficient

dazmo

Posted
Posted
hey guys

anyone here have an aussie delivered R32 GTR????

i need to ask any owners a few questions about their rear bumpers.

 

any help is much appreciated

thanks guys

anf

G'day anf I own an r32 gtr (aussie delivered) I would be happy to answer youre questions

Dahtone Racing Grand Master

Dahtone Racing

Posted
  • Author
Posted

ok part no. was good as was said already but the part is no longer available so there is no chance i can get a new one.

so it looks like im going to have to get a fibreglass one made up then get one made of CF unless as i said some one will let me borrow one for a fee of course.

dazmo - i need to know wat the rear number plate section looks like up close like where the no. plate lights mount and where the actual finisher bolts up or clips to.

  • 5 months later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • uchoa
      Yet another RB Neo misfiring thread after reading all the others.

      By uchoa · Posted

      Good tips, will get on those tomorrow. When doing the maintenance I did move a few of those connectors around, and things that are old tend to not like moving around. (Like me).
    • GTSBoy
      Yet another RB Neo misfiring thread after reading all the others.

      By GTSBoy · Posted

      Don't try it. It will be shit. Better chance of damaging the engine than gaining any knowledge about the old one. Maybe, but unlikely, especially if the O2 sensor is working. You can use NissDataScan to look at the stock ECU.   Cleaning the AFM is seldom necessary and seldom helps. The R35 coil & loom conversion should eliminate dud coils or plugs. But as you still have misses - look to the plug where the coil loom connects to the engine loom, and the CAS plug. Need quality connections there. Also look to injector plugs. And the AFM plug while you're at it. Also look to whether your injectors are clean and flowing evenly. Get them out and onto a testbench.
    • uchoa
      Howdy from the states.

      By uchoa · Posted

      Good to know, I feel like I am in for a rollercoaster ride that looks like a sine wave. 
    • GTSBoy
      Howdy from the states.

      By GTSBoy · Posted

      You'll fit right in. Acceptance is the first step.
    • uchoa
      Yet another RB Neo misfiring thread after reading all the others.

      By uchoa · Posted

      Hey folks. I've been lurking and browsing the forum for a while, since I got into my head that I wanted a skyline. Having purchased an overpriced completely stock GTT, (only "mods" it has is HKS pod filter and catback) now that it became legal in the US, it was all glorious and sututu noises here and there. But then I wanted to do things right and went to do basic maintenance. After all the fluids, filters done, I did the spark plugs, that's when the problems started.. First the car started spluttering at around 4.5k RPM. Which I gapped down the new plugs and that solved the sputter there, but the car now always misfires at idle with pops when lifting off and shifting 2nd to 3rd. Similar to the issues in this recent thread. I've been banging my head against the wall, reading the threads here and trying suggestions for a couple months now, so decided to start this one to explain exactly what I tried and what is going on. The symptoms of the issue: Idle and low revs misfiring intermittently. You can hear the exhaust tone change and the shakes on the shifter knob. It happens frequently, but doesn't seem to have a rhythm to it. Pops when backing off throttle. It pops and or burbles almost feels like it spits fire when it pops. (Happens mostly in 3rd gear at around 2k RPM). When under load and after 6k RPM, it also pops when shifting from 2nd to 3rd. There's a ticking noise at around 2k RPM in 2nd gear going downhill, seems unrelated though but I am out of educated and downright dumb guesses. Not noticeable lack of power when putting the car into load. The attempted diagnosis and solutions: Unplugging coils when the car is running This did nothing to change the idling and tone shift for every cylinder. Checking the exhaust headers with thermometer They all are within what I'd say it is margin of error of the laser thermometer New spark plugs Tossed two new sets, copper, iridium and using the old ones, still misfiring, even re gapped to 0.8mm, still same thing. MAF cleaned with the "specific" spray cleaner No changes in the issues what so ever. Brand new loom and r35 coil conversion (was going to add the r35 coils anyway) car runs arguably better, still misfires, but seems like does less frequently. Placebo? Code 21 now being thrown, thanks nissan gods. Removed the CAS to check the shaft for play or anything. CAS seems all fine, nothing that indicates any issue, visually speaking. Things to attempted next: Ordered a new MAF (chinesium from Amazon, to be able to return regardless of result). Fuel with proper gas, maybe it is this California water that they sell as gas that is to blame? Plugin the link ECU and check the info using the built in base map. Go back to BMW and eat my rob bearing breakfast without milky oil mixture.   Do any of you have experienced anything like this or have any suggestion?
×
×
  • Create New...