Jump to content
SAU Community

Tyre combo for wide 17s?

ASYLUM
 Share

Recommended Posts

ASYLUM Community Regular

ASYLUM

Posted
Posted

Think i'll be eading down the sleeper NA route and keeping it 4 stud.

Have decided on getting hold of some Buddy Club P1's - 17x8 front and 17x9 rear

what offset should i get these in? the available offsets for 4/114 are;

8inch

Offset 22, H/PCD 4/114

Offset 32, H/PCD 4/114

9inch

Offset 27, H/PCD 4/114

Offset 37, H/PCD 4/114

also i'd still like to keep the tyres on the low profile side but would like to hear what people think of the better tyre size combos and what brand/spec tyres are good. looking for a nice tread pattern and good grip.

i know there are quite a few people aorund on the forums with these wheels so i am sure there is plenty of 'consumer research' to be had :)

cheers.

Link to comment
https://www.sau.com.au/forums/topic/60819-tyre-combo-for-wide-17s/
Share on other sites
ASYLUM Community Regular

ASYLUM

Posted
  • Author
Posted

well having read through what i can find in the forums i think i am looking at ...

17x8 front - Offset 32 H/PCD 4/114

and

17x9 rear - Offset 37 H/PCD 4/114

seems to be as close as i can get to the GTS-t offset from what is available.

appreciate any advice otherwise though.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • PranK
      Lock up the old for sale / wtb threads.

      By PranK · Posted

      We have a huge update coming in the next few months, version 5 of Invision will be released. I'm holding off any changes until after this change as I'm not sure what features will be removed or introduced.
    • The Bogan
      NC MX5

      By The Bogan · Posted

      Yeah, plenty of air flow, there is a dedicated path that feeds the air in to the OEM intake tube behind the bumper As for a "tangible effect", maybe, but getting the pod/intake air out of the hot engine bay is worth it psychologically to me, even if it gives no performance difference, so the tangible effect in my Lizard brain saysss yessss  In the end, to me a tangible effect isn't always about performance, sometimes it a sound or a look, or even a...... feeling  Ooga-Chaka Ooga-Ooga Ooga-Chaka Ooga-Ooga Ooga-Chaka Ooga-Ooga Ooga-Chaka Ooga-Ooga
    • Duncan
      RB20DE NEO smallbox clutch.

      By Duncan · Posted

      yeah first and reverse is where you will find clutch release issues (whether hydraulic or mechanical) because the difference in revs required is the highest there; particularly changing down from 2nd to 1st when still moving. To be clearer though, it is possible that the clutch release bearing is the wrong height. This is less likely than a hydraulic issue but it is not unheard of when you are mixing and matching
    • Duncan
      NC MX5

      By Duncan · Posted

      Quite right, if you make it to that pension you deserve every cent
    • jtha7
      Replacing turbo water line - any recommendations or advice?

      By jtha7 · Posted

      Hi all, Restoring r33 series 1 rb25det. All the heater hoses were on their way out, have replaced them and put it all back together. After testing I noticed a small leak from behind the head on the actual metal water line to the turbo when cars warm. I tried running a longer hose over it but it kept leaking...   I am about to take the (stock) manifold off again😔 to change the water line does any one have any lines they recommend? I was looking at Aeroflow Turbo Oil & Water Line Set but not sure what everyone else recommends. Car is completely stock but want to upgrade turbo eventually. it looks like ill have to disconnect a lot just to replace these lines so if there's anything else recommended to do please let me know. Thank you in advance!
×
×
  • Create New...