Jump to content
SAU Community

FS: Stagea RS4-V

Jay95R33
 Share

Recommended Posts

Jay95R33 Grand Master

Jay95R33

Posted
Posted

Nissan Stagea RS4-V

Built December 1996

4 speed automatic

70,000 km

Turbo 6 cylinder RB25det

ATTESA electronic 4wd system (same concept as used in the R33 GTR)

Platinum Silver in colour

Leather and suede interior

Electric seats

Climate control

Power windows, locks, mirrors, hatch

Duel sunroofs

TV/Monitor/CD stacker/tape deck/radio

R34 Gtt mags with 235/45/17 tyres

Full three point alarm with GSM (mobile phone) pager

Turbo timer integrated with the alarm system

Paint and panels are in top notch condition as is the interior (see link below for pictures).

The car was 100% stock standard when I bought it. Since buying it I have tuned it for better fuel economy and increased power.

Modifications include a Unichip computer with electronic boost controller, custom made three inch turbo back exhaust with high flow cat, Trust side mount intercooler, high flow panel filter and iridium spark plugs. At 11psi of boost it produced 170rwkw and has increased fuel economy by around 15%.

Always serviced every 5,000km with full synthetic oils.

If your after performance with luxury and practicality then this is the car for you.

Two pages of pictures can be seen here:- http://www.skylinesaustralia.com/ph...t=500&ppuser=63

Priced at $20,400 ono with registration until January 2006.

Email at [email protected] or contact me directly on 0414 707 105

stagea_001.jpg

Link to comment
https://www.sau.com.au/forums/topic/76956-fs-stagea-rs4-v/
Share on other sites
  • 2 weeks later...
Jay95R33 Grand Master

Jay95R33

Posted
  • Author
Posted

More pics here;

http://members.iinet.net.au/~jay77/Stagea/...a/stagea001.jpg

http://members.iinet.net.au/~jay77/Stagea/...a/stagea002.jpg

http://members.iinet.net.au/~jay77/Stagea/...a/stagea003.jpg

http://members.iinet.net.au/~jay77/Stagea/...a/stagea004.jpg

http://members.iinet.net.au/~jay77/Stagea/...a/stagea005.jpg

http://members.iinet.net.au/~jay77/Stagea/...a/stagea006.jpg

http://members.iinet.net.au/~jay77/Stagea/...a/stagea007.jpg

http://members.iinet.net.au/~jay77/Stagea/...a/stagea008.jpg

http://members.iinet.net.au/~jay77/Stagea/...a/stagea009.jpg

http://members.iinet.net.au/~jay77/Stagea/...a/stagea010.jpg

http://members.iinet.net.au/~jay77/Stagea/...a/stagea011.jpg

http://members.iinet.net.au/~jay77/Stagea/...a/stagea013.jpg

http://members.iinet.net.au/~jay77/Stagea/...a/stagea014.jpg

http://members.iinet.net.au/~jay77/Stagea/...a/stagea015.jpg

http://members.iinet.net.au/~jay77/Stagea/...a/stagea016.jpg

http://members.iinet.net.au/~jay77/Stagea/...a/stagea017.jpg

http://members.iinet.net.au/~jay77/Stagea/...a/stagea018.jpg

http://members.iinet.net.au/~jay77/Stagea/...a/stagea019.jpg

http://members.iinet.net.au/~jay77/Stagea/...a/stagea020.jpg

http://members.iinet.net.au/~jay77/Stagea/...a/stagea022.jpg

http://members.iinet.net.au/~jay77/Stagea/...a/stagea023.jpg

Link to comment
https://www.sau.com.au/forums/topic/76956-fs-stagea-rs4-v/#findComment-1428518
Share on other sites
  • 2 weeks later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • Haggerty
      RB25DE NEO with Haltech ECU

      By Haggerty · Posted

      Yep, the closest base tune available was for the GTT, I went with that and made all the logical changes I could find to convert it to Naturally Aspirated. It will rev fine in Neutral to redline but it will be cutting nearly 50% fuel the whole way.  If I let it tune the fuel map to start with that much less fuel it wont run right and has a hard time applying corrections.  These 50% cuts are with a fuel map already about half of what the GTT tune had.  I was having a whole lot of bogging when applying any throttle but seem to have fixed that for no load situations with very aggressive transient throttle settings. I made the corrections to my injectors with data I found for them online, FBCJC100 flowing 306cc.  I'll have to look to see if I can find the Cam section. I have the Bosch 4.9 from Haltech. My manifold pressure when watching it live is always in -5.9 psi/inHg
    • brillo
      Leak from Tokico BM50 Brake Master Cylinder

      By brillo · Posted

      Hi My Tokico BM50 Brake master cylinder has a leak from the hole between the two outlets (M10x1) for brake pipes, I have attached a photo. Can anyone tell me what that hole is and what has failed to allow brake fluid to escape from it, I have looked on line and asked questions on UK forums but can not find the answer, if anyone can enlighten me I would be most grateful.
    • MBS206
      Cas issue

      By MBS206 · Posted

      It will be a software setting. I don't believe many on here ever used AEM. And they're now a discontinued product,that's really hard to find any easy answers on. If it were Link or Haltech, someone would be able to just send you a ECU file though.
    • nash47
      Cas issue

      By nash47 · Posted

      Yes sir am asking is there possible way from aem tuner from wiring pins 
    • MBS206
      Cas issue

      By MBS206 · Posted

      Have you checked cam to crank timing and confirmed balancer marks are correct?
×
×
  • Create New...