Jump to content
SAU Community

Pulleys on R33 GTST same as GTR?

rev210

By rev210,
in Engines & Forced Induction

 Share

Recommended Posts

GTS-t VSPEC Grand Master

GTS-t VSPEC

Posted
Posted

Rev210,

Don't know about the kit, probably worth emailing Greddy in the US, I usually get a decent response from them.

Are you planning on going to the 'plex soon to run, wouldn't want to miss the unveilinging of the new and improved car. I'll be there trying to improve, but the weather is pretty hot, so times may not be at there best.

See'ya:burnout:

rev210 Grand Master

rev210

Posted
  • Author
Posted
Originally posted by GTS-t VSPEC

Rev210,

Don't know about the kit, probably worth emailing Greddy in the US, I usually get a decent response from them.

Are you planning on going to the 'plex soon to run, wouldn't want to miss the unveilinging of the new and improved car. I'll be there trying to improve, but the weather is pretty hot, so times may not be at there best.

See'ya:burnout:

Early next year I guess. I've got a challenge with gradenko to see who is the quickest. To un-scientifically test whether you go quicker with a fmic or a lightened flywheel.

Might be easy to determine the pulley question if alternators and aircon pumps are the same between models

GTS-t VSPEC Grand Master

GTS-t VSPEC

Posted
Posted

rev210,

I'm sure that the aircon and alternators are different between models, but that is not to say that the pulleys are different.

It's good to see a friendly rivalry happening between you and gradenko, I can't wait to see who comes out on top. I think the first Wed. night drags is on 8th of January.

See'ya:burnout:

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • Kinkstaah
      Mistakes were made, my R34 Story

      By Kinkstaah · Posted

      I don't think there's any way someone is push starting this car.. I honestly can barely move it, and moving it and steering it is just flat out not possible. I'm sure it is, but needs a bigger man than me. I have a refurbished starter now. The starter man was quite clear and consise showing me how nothing inside a starter really should contribute to slow cranking, and turned out that for the most part... my starter was entirely fine. Still, some of the wear items were replaced and luckily it didn't show any signs of getting too hot, being unfit for use, etc. Which is 'good'. I also noticed the starter definitely sounded different, which is a bit odd considering nothing should have really changed there.... Removed and refit, and we'll pretend one of the manifold bolts didn't fully tighten up and is only "pretty" tight. GM only wants 18ft/lb anyway. I also found a way to properly get my analog wideband reading very slightly leaner than the serial wideband. There's Greg related reasons for this. The serial output is the absolute source of truth, but it is a total asshole to actually stay connected and needs a laptop. The analog input does not, and works with standalone datalogging. Previously the analog input read slightly richer, but if I am aiming at 12.7 I do not want one of the widebands to be saying 12.7 when the source of truth is 13.0. Now the source of truth will be 12.65 and the Analog Wideband will read 12.7. So when I tune to 12.7 it'll be ever so slightly safer. While messing with all of this and idling extensively I can confirm my car seems to restart better while hot now. I did add an old Skyline battery cable between the head and the body though, though now I really realise I should have chosen the frame. Maybe that's a future job. The internet would have you believe that this is caused by bad grounds. In finding out where my grounds actually were I found out the engine bay battery post actually goes to the engine, as well as a seperate one (from the post) to the body of the car. So now there's a third one making the Grounding Triangle which is now a thing. I also from extensive idling have this graph. Temperature (°C) Voltage (V) 85 1.59 80 1.74 75 1.94 70 2.1 65 2.33 60 2.56 55 2.78 50 2.98 45 3.23 40 3.51 35 3.75 30 4.00   Plotted it looks like this. Which is actually... pretty linear? I have not actually put the formula into HPTuners. I will have to re-engage brain and/or re-engage the people who wanted more data to magically do it for me. Tune should be good for the 30th!
    • wizlb
      Who has a Infiniti Q60, Q50 (V37)?

      By wizlb · Posted

      There are guys on Facebook under, Infiniti Owners Australia   https://www.facebook.com/share/g/1Z3RbPqx4k/?mibextid=wwXIfr What Whp are you after and I can help, and join this Q group in the states. https://www.facebook.com/share/g/19A59cN3JR/?mibextid=wwXIfr
    • MR51MN
      Who has a Infiniti Q60, Q50 (V37)?

      By MR51MN · Posted

      Does any of you guys have instagram pages for your builds? Keen to see some Aussie builds. I still can't figure out how to post photos in here.
    • MR51MN
      Who has a Infiniti Q60, Q50 (V37)?

      By MR51MN · Posted

      That awesome thanks for that. 
    • wizlb
      Who has a Infiniti Q60, Q50 (V37)?

      By wizlb · Posted

      You can Remote any of these VR30..globally  Check: AMS Performance | Racebox | Sonic Tune | Soho | Z Motorsports | Specialty Z    Performance Parts | AMS | Z Motorsports | Boosted 6 |    Exhaust | Fast Intentions | ARK | MBRP Motordyne | Borla    There is someone in Sydney with 650whp   I am at 430whp without flex fuel, but FBO & Flex-fuel will push you to 500whp!!  
×
×
  • Create New...