Jump to content
SAU Community

Recommended Posts

* DUE TO CONFLICTING OPINIONS, THIS MAY OR MAY NOT WORK. IT HAS FOR SOME, HASN'T FOR OTHERS*

This came up a while ago and I have had the same problem since I imported the car 6 months ago.

Basically when cold the car won't idle up on its own, you need to stab the throttle then its fine. When its warm its not a problem.

I went through the whole lot, cleaned throttle body, AAC, air regulator, Plugs, packs the works.

Today I bought a new battery as my old one was shagged, the new one is a Bosch Silver series, pretty bloody big, just fits on the battery tray and had to make up new terminals and such. Cost $99 on special so not a cheap one.

Result? Car fired up straight away and idled up perfectly! No throttle needed and it turned over in half the time it normally takes. I have'nt driven it for a week either so this was certainly the test.

It seems the ECU needs max volts to operate the cold start properly. The previous battery in there was about half the size of the new one, its a brute!

Definately worth the 100 bucks as I think many cars, especially with most of us running fairly serious stereo gear can benefit from the biggest battery we can fit in the space available.

Good luck!

Link to comment
https://www.sau.com.au/forums/topic/80731-cold-start-problem-r3233-owners-read/
Share on other sites

Are you positively annoyed friend? dude mate, sounds like u got the fix to my problem.

I will be grabbing a battery on Monday and trying this.

As my battery neally dead too, and need to keep the stereo going like u say.

i will let ya know teh outcome !

See ya mate.

Hey my car has the same issue, never thought of it as a problem though, just a little quirk.

Maybe ill get a bigger battery next time.

Thanks for going to the effort of doing the research.

I've got the same problem.

I suspect its my injectors. I've replaced battery's etc.. no difference, does spin over quicker though.

Mine doesn't always do it but most of the time it does. Within the pfc controller if I richen up the water temp compensation for cold start the idle stumble goes away.

So mine appears to be fuel related.

You think wrong. hehe :rofl:

On the stock ecu, mine stumbled and spluttered exactly the same. Exactly.

The only way I have been able to get rid of it is to richen up the water temp fuel compensation tables once I got the PFC.

I've heard other R32's with stock ecu's stumble splutter, I've also heard other PFC equiped R32's stumble splutter then a stab of the accelerator brings her to live.

It appears to be something other than the ecu, battery etc. I think it is fuel related. Remember mine didn't 'always' do it but 90% of the time. Once it even went a few months starting perfectly then it went back to its usual splutter.

Maybe its an earth issue, playing with the battery has temporarily fixed it. :P

I'll update as I go but it started perfectly this morning :rofl:

Someone else a while ago suggested it as well as a new battery fixed his.....

Maybe the stock battery terminals are stuffed? I changed mine to huge gold plated ones.

Either way, its worked for me so far so if its goes back to its old ways i'll be back ,:P

i have the exact same problem on mine.

battery died last week so i replaced the battery, but didnt do anything

i havent bothered to look into it further, its been like this since i got the car 2 years ago.

i wish i could fix it though coz my remote ignition is useless

hmmm bizzare.

All I know is it works for me so I'm stoked :D

Maybe Nissan will hold the answers?

Did you replace it with a bigger battery? Maybe the batterys are undersized in them?

Who knows, did'nt hurt though cause my battery needed replacing badly. WOuldn't hold charge for more then a day.

Well i went out on my day off and shopped for batteries, but ended up at super cheap wiht a Bosch Gold Series one, cos me 89, ten Bucks off.

Thing is tho it was taller, lil, well the Terminals are form the top, not sunken in like the stock batt. The Wires with teh battery terms. were too short. arrrgg

so i used some big arse amp white and attached to the old bat climps and then attached new ones to the ends of amp wire, seems to go fine, haven't had teh moring test yet, that is tomorrow.

I got to find better way to joint that big arse wire so i 100% sure i getting percet connection.

If got any ideas on the joining let us know.

Anyway i let ya's know how all goes.

Later,

haha Thats bodgy as sh*t. :D

Head down to supercheap or where ever and grab a nice new big fat earth wire.

Thats one fixed.. Unsure what to do about the other one though. :D

I replaced it with a 480cc Excide thing with a nice little window to see the condition of the battery. It spins the car over rather quick.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Cheers fellas, I got a price for a r33 gtst box was 1500 including post and thought it was too cheap  
    • The SS button head cap screw on the back? If so, good to know. I presumed it was there for basic assembly and nothing more. 
    • Hello, everyone. I'm new to the forum. I have a 1989 Nissan Skyline R32 GTR. I have lost all power to the interior, including AC controls, the gauge cluster, turn signals, and windows. Stuff that still works includes the horn, brake lights, radio, and headlights. All fuses, in the interior and exterior boxes, tested good.  It starts and runs fine, just with no gauge power or anything stated above. No warning lights either. Things that I have tested: - Fusable link tested fine - No other fuses blown - Alternator good - IGN switch tested fine - With my power probe, I can backfeed power through the IGN pin to the plug on the back of the gauge cluster, and everything comes back on.    So my theory is something on the control side that sends the ignition power through the system isn't doing its job, or a wire is broken. (I would think that it is the ignition switch that would do that, but who knows?). The ignition relays don't fire (all relays tested good). So what tells them to fire other than the IGN switch?  I would really appreciate it if someone had some insight on this. I have tons of hours into this; I don't want to give up in defeat! I have the HD wiring diagram, but having all those wires laid out like that on one sheet of paper makes things pretty hard to follow.  Thanks for reading, and thanks for the replies.  Where should I look next? Thanks.
    • Install a MAP sensor pre and post throttle. Best data you could have for NA, then play with the bends and/or air box and see how much of inflection is created at WOT on the plot.
    • And gone to a new home  
×
×
  • Create New...