Jump to content
SAU Community

Avc-rs

Troy@Pro Speed Racing
 Share

Recommended Posts

Troy@Pro Speed Racing Collaborator

Troy@Pro Speed Racing

Posted
Posted

DTEC Boost Controller Pro (DTEC-BC-PRO) The DTEC-BC-PRO is quite simply THE BEST boost controller ever made. It turns your Gameboy Advance SP into a powerful Electronic Boost Controller cabable of controlling boost pressures in excess of 60psi. The DTEC-BC-PRO allows everything from simple "one number" boost control that can be set up in minutes to the most advanced closed loop, gear dependant, RPM, and throttle position based programmable boost controller ever conceived. It comes standard with 60+psi cabaple inline boost control solenoid; 45psi MAP sensor; KnockLite detonation detector and more. Advanced features include the ability to store and switch between five (5) different boost maps; scramble mode; overboost protection; "start boost" feature to speed turbo spool up; and gain control. You even have the option of adding a second solenoid (sold separately) to completely control pressure to both the top and bottom of you external wastegate for the ULTIMATE in high boost control. These are features you will not find in the $1050 Greddy E01; the $1100 Blitz SBC-id; the $750 Apexi AVC-R; or even the $990 HKS EVC V. This incl the DEFI looking Boost guage as shown in the pricture if you have a GBA

The Gameboy Advance SP is not included. While it is required to set up the boost controller you do not have to leave it plugged into the DTEC-BC-Pro.

THESE ARE AVAILABLE NOW. VERY EASY TO TUNE AND SET UP.

LOCATED ON THE CENTRAL COAST NSW

207.jpg

RRp is $635

SAU Price is

$595 till end of Month

Troy

Link to comment
Share on other sites
 Share
Go to topic listing


  • Latest Posts

    • nismo_au
      Sau A.c.t. - What Did You Do To Your Car Today?

      By nismo_au · Posted

      Cheers. 
    • XoRoKu
      R32 GTR fuel gauge not working despite fixing fuel level sender

      By XoRoKu · Posted

      Thanks, I checked from the back of the cluster and no reading there. I undid the connector and plugged in the wires directly to start from where I'm getting a reading: https://imgur.com/a/W8JI6Yr Weirdly enough when I tried to get a reading from the crimps that connect to the fuel pump assembly, I got nothing. Not sure what's my next step as I have admittedly limited knowledge with electricity. 
    • VooDoo34
      Sau A.c.t. - What Did You Do To Your Car Today?

      By VooDoo34 · Posted

      Looks clean as bro! very nice.
    • Neostead2000
      rb20de neo +t conversion - boost pressure sensor needed?

      By Neostead2000 · Posted

      Agreed with the rest. Also at least based on my own research, there are no readily available stock or close-to-stock RB20Neo maps that you could download and use as a base were you to buy a complete standalone ECU, and the regular 20DET maps don't really work well so you'd need to take it to a tuner if you have no experience. I installed an AEM V2 on my 20Neo+T and had lots of headaches until I got it to run and idle properly but I've yet to remap it fully. You have to start building up your timing and fuel maps entirely from the ground up; even the ones for a 25 didn't work at all.
    • klutched
      GOT SUM's RB34

      By klutched · Posted

      Got some decent progress after work yesterday and also today. Got the ECU all wired and passenger side interior all back together. Kept the wiring up nice and high to avoid people standing on it. Got the surge tank relays rewired and tidied up the pump wiring and cut a hole to bring the cables through.  I found a spare USB cable I had lying around so I decided to cut it up and see if I could use it for my CAN 1 bus. Turned out one of the pins I needed was to the shield of the cable so i cut it up and desoldered it and resoldered to the correct pins.  Had the issue with the powersteering hose hitting the A/C compressor and fan shroud. I pulled the bracket off and modified it to remove the front mounting point which now clears it all. Will keep an eye on it to see if theres any signs of fouling once it's up and running.
×
×
  • Create New...