Jump to content
SAU Community

Recommended Posts

If you think of a Skyline as what its supposed to be... ie a sporty passenger car, then HICAS is awesome. If you take a corner too fast it kicks in and helps you keep the car in control and back on line.

If you're a fully sick drifter or die hard trackday warrior, then HICAS is like going on a date with a hot chick and having your mom run upto your car to give you a scarf so you don't catch a cold... ie... nice thought, but totally useless. You want to control your car one way, and HICAS wants to help so it makes your car go the other way.

i disagree with you on this point, i understand that it might make the turn in feel sharper on medium speed corners, but high speed cornering say 100-140km/h it makes the car feel unstable, this thought is shared by a few passengers in my car and even someone driving behind it who has seen how the hicas moves the rear of the car on turn in. not safe at all!

i disagree with you on this point, i understand that it might make the turn in feel sharper on medium speed corners, but high speed cornering say 100-140km/h it makes the car feel unstable, this thought is shared by a few passengers in my car and even someone driving behind it who has seen how the hicas moves the rear of the car on turn in. not safe at all!

100km/hr cornering with passangers?? >< dun want to be responsible for other ppls death....

huh? isn't that what funkymonkey is saying? it's good for normal road driving for safety purpose but not for fast cornering??

100km/hr cornering with passangers?? >< dun want to be responsible for other ppls death....

huh? isn't that what funkymonkey is saying? it's good for normal road driving for safety purpose but not for fast cornering??

mate no body was going to die at any point in time when trying this. by corner i mean sweepers that u will find on many open roads, and also from my experience on the skidpan. If you go driving on a decent open road (usually 100 zones) u will see how annoying it is.

so the rear wheels turn the same way as the fronts at high speed?

:(

when i take high speed corners it feels like the rear wheels turn slightly to the left while im cornering right, making the swing out slightly

yes, they first turn left then right as u continue through the corner, the wheels turning left as u turn in is what annoys me badly, as you said u really feel the tail swing out a bit, if anything it makes the car unstable!

This quote was taken from another forum from an owner of an R33 GTR-

the best way ive heard the 4ws explained is that for an average driver, it helps correct those little mistakes thru corners you might make, but for anyone who tkaes precise lines, and likes to be in complete control of the car, it gets sticky very fast, as you and the car are both trying to correct something, and the car tries to correct you, you try to correct the car, and this goes on and on making a small problem a large on quickly....

Not a bad description I guess. He went on to add:

...like big brother was trying to help u but he'd had a few cold ones beforehand  :lol:

Cheers,

Ben

This quote was taken from another forum from an owner of an R33 GTR-

Not a bad description I guess. He went on to add:

...like big brother was trying to help u but he'd had a few cold ones beforehand

Cheers,

Ben

That sounds about right, but not a few cold ones, more like a case :lol:

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • As discussed in the previous post, the bushes in the 110 needed replacing. I took this opportunity to replace the castor bushes, the front lower control arm, lower the car and get the alignment dialled in with new tyres. I took it down to Alignment Motorsports on the GC to get this work done and also get more out of the Shockworks as I felt like I wasn't getting the full use out of them.  To cut a very long story short, it ended up being the case the passenger side castor arm wouldn't accept the brand new bush as the sleeve had worn badly enough to the point you could push the new bush in by hand and completely through. Trying a pair of TRD bushes didn't fix the issue either (I had originally gone with Hardrace bushes). We needed to urgently source another castor arm, and thankfully this was sourced and the guys at the shop worked on my car until 7pm on a Saturday to get everything done. The car rides a lot nicer now with the suspension dialled in properly. Lowered the car a little as well to suit the lower profile front tyres, and just bring the car down generally. Eternally thankful for the guys down at the shop to get the car sorted, we both pulled big favours from our contacts to get it done on the Saturday.  Also plugged in the new Stedi foglights into the S15, and even from a quick test in the garage I'm keen to see how they look out on the road. I had some concerns about the length of the LED body and whether it'd fit in the foglight housing but it's fine.  I've got a small window coming up next month where I'll likely get a little paint work done on the 110 to remove the rear wing, add a boot wing and roof wing, get the side skirt fixed up and colour match the little panel on the tail lights so that I can install some badges that I've kept in storage. I'm also tempted to put in a new pair of headlights on the 110.  Until then, here's some more pictures from Easter this year. 
    • I would put a fuel pressure gauge between the filter and the fuel rail, see if it's maintaining good fuel pressure at idle going up to the point when it stalls. Do you see any strange behavior in commanded fuel leading up to the point when it stalls? You might have to start going through the service manual and doing a long list of sensor tests if it's not the fuel system for whatever reason.
    • Hi,  Just joined the forum so I could share my "fix" of this problem. Might be of use to someone. Had the same hunting at idle issue on my V36 with VQ35HR engine after swapping the engine because the original one got overheated.  While changing the engine I made the mistake of cleaning the throttle bodies and tried all the tricks i could find to do a throttle relearn with no luck. Gave in and took it to a shop and they couldn't sort it. Then took it to my local Nissan dealership and they couldn't get it to idle properly. They said I'd need to replace the throttle bodies and the ecu probably costing more than the car is worth. So I had the idea of replacing the carbon I cleaned out with a thin layer of super glue and it's back to normal idle now. Bit rough but saved the car from the wreckers 🤣
    • After my last update, I went ahead with cleaning and restoring the entire fuel system. This included removing the tank and cleaning it with the Beyond Balistics solution, power washing it multiple times, drying it thoroughly, rinsing with IPA, drying again with heat gun and compressed air. Also, cleaning out the lines, fuel rail, and replacing the fuel pump with an OEM-style one. During the cleaning process, I replaced several hoses - including the breather hose on the fuel tank, which turned out to be the cause of the earlier fuel leak. This is what the old fuel filter looked like: Fuel tank before cleaning: Dirty Fuel Tank.mp4   Fuel tank after cleaning (some staining remains): Clean Fuel Tank.mp4 Both the OEM 270cc and new DeatschWerks 550cc injectors were cleaned professionally by a shop. Before reassembling everything, I tested the fuel flow by running the pump output into a container at the fuel filter location - flow looked good. I then fitted the new fuel filter and reassembled the rest of the system. Fuel Flow Test.mp4 Test 1 - 550cc injectors Ran the new fuel pump with its supplied diagonal strainer (different from OEM’s flat strainer) and my 550cc injectors using the same resized-injector map I had successfully used before. At first, it idled roughly and stalled when I applied throttle. Checked the spark plugs and found that they were fouled with carbon (likely from the earlier overly rich running when the injectors were clogged). After cleaning the plugs, the car started fine. However, it would only idle for 30–60 seconds before stalling, and while driving it would feel like a “fuel cut” after a few seconds - though it wouldn’t fully stall. Test 2 – Strainer swap Suspecting the diagonal strainer might not be reaching the tank bottom, I swapped it for the original flat strainer and filled the tank with ~45L of fuel. The issue persisted exactly the same. Test 3 – OEM injectors To eliminate tuning variables, I reinstalled the OEM 270cc injectors and reverted to the original map. Cleaned the spark plugs again just in-case. The stalling and “fuel cut” still remained.   At this stage, I suspect an intermittent power or connection fault at the fuel pump hanger, caused during the cleaning process. This has led me to look into getting Frenchy’s fuel hanger and replacing the unit entirely. TL;DR: Cleaned and restored the fuel system (tank, lines, rail, pump). Tested 550cc injectors with the same resized-injector map as before, but the car stalls at idle and experiences what feels like “fuel cut” after a few seconds of driving. Swapped back to OEM injectors with original map to rule out tuning, but the issue persists. Now suspecting an intermittent power or connection fault at the fuel pump hanger, possibly cause by the cleaning process.  
×
×
  • Create New...