Jump to content
SAU Community

Recommended Posts

All items are brand new. Most parts are for my project but have to sell my car soon.

1. APEXI AVCR (Boost Control) $ 660

2. HKS SSQV Blow Off $ 330

3. DEFI BF II Oil Temp $ 218

4. DEFI BF II Water Temp $ 218

5. DEFI Control Unit $ 156

6. HKS Timing Belt For RBs $ 300

7. AUTOMETER Air / Fuel (Cobalt) $ 133

8. AUTOMETER Boost Meter (Carbon) $133

9. TEIN Super Street With EDFC Or Without $ PM or Mail

10. TEIN EDFC Only $ 566

11. HKS EVC (Boost Control) $ 717

12. TOMEI Cams And Cam Gears $ PM Or Mail

Interested pls PM or Maill me at [email protected]

Thanks !

Performance Werkz

All items are brand new. Most parts are for my project but have to sell my car soon.

1. APEXI AVCR (Boost Control) $ 660

2. HKS SSQV Blow Off $ 330

3. DEFI BF II Oil Temp $ 218

4. DEFI BF II Water Temp $ 218

5. DEFI Control Unit $ 156

6. HKS Timing Belt For RBs $ 300

7. AUTOMETER Air / Fuel (Cobalt) $ 133

8. AUTOMETER Boost Meter (Carbon) $133

9. TEIN Super Street With EDFC Or Without $ PM or Mail

10. TEIN EDFC Only $ 566

11. HKS EVC (Boost Control) $ 717

12. TOMEI Cams And Cam Gears $ PM Or Mail

Interested pls PM or Maill me at [email protected]

Thanks !

Performance Werkz

hmmm seems like a trader...

u'll pbly get shut down

Closed.

Performance workz its obvious you are a business so please do not open any further threads in the classifieds unless you become an SAU business sponsor.

Feel free to pm me for further information

Guest
This topic is now closed to further replies.


  • Latest Posts

    • That still isn't a lot to go on. I don't have a Y50 Fuga Head Unit wiring diagram. I can say that a lot of nissans of that age shared head unit plugs, so if you are in Australia something like this would probably help: https://aerpro.com/app091# You plug that into the car loom, then either plug the head unit ISO into that (if it has ISO), or you buy and ISO adapter harness that you wire in. Bit of stuffing around, but once you have ISO its easy to change things in future.
    • It is a kunfine Android screen . Does anyone know the wirering diagram of the fuga ??
    • just an update to this, poor man pays twice  Tried sanding down the pulleys but it didnt do the trick. Chucked another second hand alternator in the na car which I got for free off my mate and its fixed the squelling. Must have been unlucky with the bearings.    As for my turbo car, I managed to pick up a cwc rb alternator conversion bracket + LS alternator for 250 off marketplace, looked to be in really good nick. Installed it , started the car and its not charging the battery.... ( Im not good with auto elec stuff so im not sure if this was all I needed to do but I verified such by using a multimeter on the battery when the engine was running and I was only getting 12.2v )   I had to modify the earth strap for the new LS alternator , factory earth strap was a 10mm bolt which did not fit the bolt on the LS alternator which was double the size so I cut it off , went to repco bought some ring terminals that fit, crimped it onto the old earth strap and bolted it up to the alternator , started the car and same issue. Ran like shit and was reading 12.2 at the battery.  For a "plug and play" advertised kit thats not very plug and play but alas.  My question is , am I missing something ? Ive been reading that some people recommend upgrading the stock 80 amp alternator fuse to a 140 amp but I dont see how that would stop the alternator charging especially at idle not under load.  Regardless ive pulled it out and am going to get it bench tested by an auto elec tomorrow but it would be handy to know if ive missed something silly or have done something wrong.   
    • My wild guess is that you have popped off an intake pipe....check all of the hoses between the turbo and the throttle for splits or loose clamps.
    • Awesome, thanks for sharing!
×
×
  • Create New...