SCR34M3R

yer forgot to remove the fins in the back of it, forgot all about it untill i re-read this forum. cheers guys

well finally got car running, i blocked off rear port off, and connected the vacuum lines up from the r34 power steering lines. When i start it up u can hear the pump working, then when u turn car off power steering fluid comes out of the cap on the reservoir. Any one got some ideas how to fix this? Cheers Justin

doesnt matter, found out there was no wire's going into the ecu for afm's, now running sweet

ne one know how to test if afm is stuffed?

Thanks mate, didnt have one, but got some resistors from jaycar and made one up. It now runs YAY. Just think its in limp mode, sounds like limiter at 2k or just over. Cheers Justin

Just been doing some reading in the service manual, And im not sure if i plugged a resistor pack in. Does any one have a pic of where it is and what it looks like? Cheers Justin

Hay guys Finally got a RB26 into my car, but it wont start. I checked spark and thats fine. Im not getting any fuel out of the injectors (there is fuel in rail thou), I put multimeter on at the ecu to check if power is sending, and its only getting 0.3-0.5volts. Im not sure what it is spose to be. Will also be getting a timing light tomorrow to check timing. Any one got ne ideas for me to check? Cheers Justin

thanks guys

can i block it off?

Hi guys wasnt sure where to post this but almost finished putting a rb26 into my car, but gtr power steering pump has 3 connections on it and im pretty sure the r34 one has 2, Is there a way to make it work or do i need a R34 one? if i need a r34 one is there ne other pumps which fit? Cheers Justin

filled cylinder with fuel, would run fine, then all of a sudden would stick wide open

no sorry RB25 ecu sold

any one know if RB26 water pump is same as 25 and 30's?

For sale: Power FC d-jetro R32/R33 GTR Condition: Still in box Price and price conditions: $1500 Extra Info: comes with map sensor's and wiring also has controller Contact Details: PM or 0439 944 836 Location: Thornlie Delivery & Conditions of Delivery: pickup or post

dont think so, as different plug to start with, and 34 has traction control plus many other things r33 doesnt have.

hay mate they are from DeatschWerk in the US.

Adaptronic is sold

also have 2 R32 GTR turbos no actuator one is siezed and one has a stuffed front wheel. $100

when it was on dyno, 1 of the injectors would stick open full, and wouldnt closed untill taken out and given a light tap and then it would close again.

Adaptronic ECU with 3bar Map sensor $700 550cc x 6 injectors suit R34 one injector sticks open thou. $400 Stock RB26 flywheel $40 Stock RB25 flywheel and clutch $100 Stock RB25det neo manual ecu. $150 Stock RB26 ecu $150 RB25det neo Throttle body $50 RB25det neo Cross over pipe with BOV $50 Items are in perth, am open to offers Cheers Justin

hay guys got a R34 GTT which im putting a RB26 from a R32 in, and the wiring is starting to do my head in. Just wondering will a R34 GTR wiring harness connect up? or is there a easy way to do this? Cheers Justin

yer mate still here, dont worry im still waiting too

Hi guys got myself a 26 the otherday knew the front turbo was stuffed as it is siezed, took both off and the rear turbo dont look too good. Pic below Now the question is do i take the head off to make sure nothing has gone into the motor? Cheers Justin

gt35 is gone

bump