Remix-

Bump

Cyber spec

Ok, I have replaced the plugs again with NGK Platinum plugs, I have cleaned both AFM's with contact cleaner, I have inspected the coil packs and found them to be in good condition/working order, I have cleaned the air filter elements. Fuel filter will be done this evening. After doing this I've taken it for a drive and found it to be running very smooth, however anything over 0.9 bar of boost results in missing?

The wing must go

Hi guys, I have been having a little bit of an issue of late with my RB26DETT. Basically last week she started misfiring under full throttle and at higher revs and basically felt pretty slugish compared to usual. So i changed the plugs to Bosch plugs gapped at 1.1 and the misfire went away initially and the car felt pretty responsive. However once she warms up again the power dies down and the missing returns. The weird thing is occasionally during the drive it will have a spurt where it just feels fine and accelerates hard. Coilpacks or perhaps my existing MINES tune could be effected by the current air density?

Paint the carbon the same colour as the car ftw

Nikon D70s Digital SLR Camera + Nikkor 18-70mm lens, 512mb memory card, Lowepro carry bag and Velbron professional tripod. Camera is in as new condition (not a single scratch!) with all manuals and software. Info found here: http://www.dpreview.com/news/0504/05042003nikond70s.asp I have owned the camera since January this year and it is still under warranty from Harvey Norman - City West in Perth. Receipt provided. I am selling the camera due to lack of time to take the camera out and use it properly as I am focusing on my other hobbies - DJ'ing and Cars. The camera is not practical enough for my current photographic needs. I will consider the trade of a practical and small recent model camera such as an Olympus 720SW + a Cash adjustment. The camera without any accessories retails for $1700+. I am willing to let it go for $1300.00 FIRM. Please call me on 0406-956-073 - genuine interest only.

I'll tell you when I get it out

Wish to remove for further weight reduction. Any tips/hints on the removal process?

Hey dude, I still have the MINES rom in it with a super filthy rich jap tune. I get less than 300km's to a 60ltr tank.

Nice work dude! Has come along very well. How do you find driving it now compared to the previous setup? Suspension will be the key. It will be interesting to see how long the 20 box lives..! Stash some cash for the expected I have an R32 GTS-4 with a 26 shoved inbetween the strut towers also, flick it into rwd and all she wants to do is dance and shake her booty!!

Hi guys, I've just bought a Greddy Electronic boost gauge only to discover it has a blown light bulb inside it. I am aware that Greddy has a replacement part for it: Greddy LIGHT BLUB REPLACEMENT white bulb for back lite GReddy gauge (Electric) Manufacturer Part #: 16400061 Does anyone know where I could order a few of these from? AU Greddy distributor? Cheers

I think it depends on what type of driver you are. Personally as much as I love Skylines I would keep the 180sx EDIT: Just read the above thread, arghhh! Sorry to hear dude - Hope you get it back

If a z-tune came here it would end up in some collectors garage rather than on the streets.

Hrmm seems to load fine at this end, can anyone else please try to run my VIN number through fast?

Am I typing anything wrong for this to be run through FAST?

Exactly my thoughts.

Hey guys, any luck with this one?

HNR32-003113 please

Much respect for the sheer amount of work! Not my cup of tea though. I seriously hope that you will inform the potential buyer should you wish to sell in the future. In relation to the chassis will there be any compromise in the chassis structual rigidity?

KUMOMMORI bolt in 6 point roll cage. Suit R32 chassis: $900 CUSCO Type OS Front strut brace: $130 CUSCO Type OS Rear strut brace: $130 DEFI BF (white) Boost gauge: $200 DEFI Control Unit 2: $100 Used Nismo fuel pump: $300 Greddy Electronic Fuel Pressure gauge (memory recall button snapped off): $100 Bride drivers seat + rail (has tear in fabric near right hand hip): $500 [email protected]

Price DROP. $15k ono - This is dirt cheap! Will consider swap for a clean AE92 sx/gti rolla + cash adjustment.

A few of my 32..

I don't see why it would be. People import umcomplied vehicles into Australia quite frequently. This is a good opportunity for someone to purchase a vehicle that they can actually inspect and drive in person prior to purchase.