-
Posts
10 -
Joined
-
Last visited
-
Feedback
0%
Content Type
Profiles
Forums
Events
Gallery
Media Demo
Store
Posts posted by petiseb
-
-
Thanks mates.
@Anonymouse : thanks for the link. But someone said me r35 coils need to remap the rb.
@Griffin & @GTSBoy : thank you. So, i will buy the splitfire bnr34 coils, with the doluck r34 harness. I'll let you know in a few weeks.
- 1
-
8 hours ago, Anonymouse said:
I thought you were trying to get rid of the Ignitor?
sure.
That's why i want to install R34 coils. A friend with a BNR34 confirms me he have not ignitor in his engine bay with oem coils.
-
sure.
That's why i want to install R34 coils. A friend with a BNR34 confirms me he have not ignitor in his engine bay with oem coils.
-
In the description, i understand this is a coil with ignition built in :
true ?
-
Thanks for Quick answer.
Is the r34 coil have an ignitor built in ?
for the harness, i simply think to buy the r34 do luck harness, replace and wiring the r34 connector with r32 connector, and remove my ignitor box (ampli). Is there something that i forget ? Is it more complicated than that ?
-
Hello.
i have a r32 gtr, and a have some little misfire in high rev. I want to buy splitfire ignition system + do luck harness.
But i have a simple question for australian people, because in France, i have not a clear answer :
if i install a r34 ignition system, can i remove the ampli (power transistor) ?
thanks.
(I'll do a quick research, but hard to find answer with my limited english)
-
Hy 32 mates. (I'm french and english is hard for me^^)
I have the same problem. I will try to repair my g sensor before to buy a do luck system...
One of my cap is dead i think. I read all the topic, and there is just one thing that i don't understand.
If i understand, there are 2 caps (one 10f 25v, and another 15f 25v), and you replace this 2 differents caps by 2 identics caps 10f 35v ?
-
Hello.
I need to change the inner left boot joint.
Do you know if i am also forced to change the outer left boot joint ?
thanks. Sebastien.
-
Thanks a lot for this topic and thanks bozz. I repaired my digital clock today, and it work !
I used a desoldering station to remove the "front panel" and i resoldered the 4 resistances (just 1 needed it). Time of this operation : 30 min.
Ignition system RB26 R32/R34
in RB Series - R31, R32, R33, R34 (1986-2002)
Posted
I forgot to keep you informed, but last year, I installed r34 coils, a do luck r34 harness, so I removed the amplifier, and changed the socket on the motor side. it works perfectly.
I remind you that my goal was simply to make it more reliable because I had micro cutouts, so my main goal was to remove the capricious element: the amplifier.
And also, I have a non-programmable mine’s ECU. if I had a link or haltech, I would have taken r35 or r8 coils.