-
Posts
2,101 -
Joined
-
Last visited
-
Feedback
100%
Content Type
Profiles
Forums
Events
Gallery
Media Demo
Store
Posts posted by CEF11E
-
-
I rolld past a sweet looking black cef, with the plates CEFFIE or similar tonight on the way back from the gym, was parked on pacific highway near st leonards. Good to know there are other cefs on the north shore!! I slowed right down but no one was in the car so i kept going... is the owner on here?
HEHE that was me! i was doing a radio show at 2UE. :headspin:
I have seen a stock black one on parramatta road, i gave the dude a beep and he smiled. 20/8/04
I have also seen a white one with a RB20/5/6 hybrid that puts out 300orr rwkw. it looks kinda stock but the dude showed me under the bonnet and my jaw dropped. it was in leichhardt.10/9/04
we really need to do a sydney cefiro cruise. Are any of you guys going to the Initial Drift practice session this sunday?
-
this thread is gold.
I have a few questions about this turbo build.
I spoke to precision turbochargers and the guy told me the TO4E vtrim compressor wheel can fit on the rb25 spindle and the existing housing can be used. This would mean i do not need a vg30 exhaust housing.
Does this work?. I dont mind if it is less powerful as my goal is 210rwkw.
Is there a replacement exhaust wheel to replace the ceramic one that wont delaminate/chip? that is a direct/cheap replacement?.
The turbo will be going on an rb20 and i want it to spool up as quickly as possible with this combo.
-
Talk to toshi. he will book the dyno for you and you can meet him there. I used the dyno for a total of 17 runs and it cost me $80 The place to get the dyno work done is Procar. its on the northen beaches in sydney.
Cheers!
-
it cost me $250.
that included toshi coming to the dyno place and burning a chip on site and then doing another dyno run to make sure it was perfect.
he even gave me a copy of my stock chip so i can run it in factory tune if i like.
-
fuel economy is slightly better than before. becuase at default settings most skylines/cefiros run rich.
as for tuning in real time no.
he comes with you and organises a dyno run. he looks at the A/F ratios and other stuff and burns an eprom on site on does another run untill the chip is correct for the car.
so bacically the chip is custom made for your car and tuned properly.
-
I wanted to tell you guys about my results
My car is 1988 cefiro
rb20det
stock turbo, stock intercooler, blitz BOV, 3" exhaust from dump back, electronic boost controller, walbro fuel pump, pod plus intake. running 1 bar
before the ecu was chipped by toshi it was putting out 170rwhp and pinging. it seemed to run OK but was not as quick as i thought it should be.
Toshi took all my mods into account and remalled ignition and fuel. He also removed the speed cut and boost cut.
we put the chip in the ecu and did another run. The car sounded a lot better exhaust note. The results were 215rwhp.
Thats a 45HP increase! and the car dosent ping anymore!.
the peak power is great but the biggest difference you notice is the huge increase in torque/power in the midrange.
The car now feels awsome to drive and is now quicker than my mate's wrx :throwup: haha!
to anyone who wants their car tuned and running at its best get toshi to mod your ecu for you its the cheapest performance upgrade you will make and your air/fuel ratio will be correct.
we could have got 20more rwhp out of it according to toshi if we pushed it upto 1.1bar but i didnt like the chances of the turbo livivng very long at that boost level.
dyno sheet coming...
-
I have a few bits for sale
RX7 Series 4 intercooler with polished end tanks in good condition $50
2 x 90deg stainless bends unused 2and 1/4 inch
2 x 2 and 1/4 stainless pipes 300mm long unused $50 for all 4
RB20DET Head complete with cams, coilpacs, valves, even sparkplugs! $200
RB20DET Block, pistons, rods complete bottom end needs rebuild but complete $100
S14 200SX Calipers in good nick witn no burn marks $150
Trust Pnumatic boost controller (best damn non electronic controller) $50
Cefiro dash in crap condition $1 six pack
call me on 0425 360 355
my name is Nic
Also looking to trade and bits for a large intercooler to suit a Cefiro.
Cheerz.
-
I have a spare cefiro dash if anyone wants it. it has a big bubble in the parcel tray ontop. but it has the climate control and mirror thingies.
These dashes are not too hard to take out.
Say if anyone wants to take my dash along to a wrecker to see if it lines up with an r32 one just let me know.
its in sydney.
-
ill take it.
SOLD!!
PM me please!!
-
I have just swapped to an r32 ecu in my cefiro and had toshi remap the chip for my car. so yes it will run but the A/f ratios will be wrong at stock
-
Everyone who has been in mine or driven it now wants one or is looking for one. so they will be coming here in a flood if the 15 year rule stays.
Cant wait! i need the parts.
also it will make our insurance cheaper according to my freind that works in an isnurance company.
-
yep, my exhaust is going to be farked unless i guard it somehow. my cannon has so many scrapes it almost has a hole in it!!
the car is on tien hr's and it scrapes at the cat and the cannon.
-
CEF11E's Cefiro
1988 Nissan Cefiro
Tein HR coilovers
brass button clutch
Nismo LSD 1.5 way :wassup: (just sold kidney to pay for it)
3" exhaust from turbo back
Pimped up Tinted windows
Blitz, Trust and Greddy stuff
Walbro fuel pump
New Ferodo DS2500 brakes
-
sorry guys car sold...
cheers!
spotted
in Four Door Family
Posted
nah dude. i am i am just a computer nerd. i do a guest apperence there every wed night and talk about computers for 1/2 hour
hehe glad u like my ride.