warriorbrawl

I had a 180sx which had a light taping noise very much like you are describing after lots of looking and listening I eventually did a compression test and found it was cracked ring lands on the rear cylinder. It was hardly noticable aside from a slight drop in boost and the idle was a tiny bit rough- just a smidge. I hope it isn't that in your case-good luck with it. Cheers.

A friend got one and the temp sensor at the bottom needed a bushing to the correct size, so dont think it will drop in in one night. Cheers

Thankyou driftline racing.

someone must have one of these lying around home. Cheers

Hey just chasing a Gtr injector can be 32 or 33 pretty sure they are the same. Please pm me. Cheers.

Agreed any car with stock boost generally delivers power in a very linear fashion. Dont take it out and thrash it, if there is a problem you will only make it worse- get it checked out by someone that knows gtr's and can check the tune as in the AFR's. at least then you can drive your new car knowing its all good.

Hey mate- how old /new is the turbo? Is it the stock one? How many kms do you think the engine has done? this maybe be a good indicator as to what is gone.

hey mate is there a group buy on the r33's going at the moment? Can I get in on the last buy if you have any spares-Thanks

Bump

Top of the day to you.

Just an update- I am dropping the price to $24500 The car has done a 12.1 Qtr mile time at WSID . I have just had frount brakes machined and Bendix ultimate pads fitted, also new platinum spark plugs fitted 3 weeks ago. The car is running like a dream. I have had 1 person actually come and see the vehicle since it has been for sale. If you are in the market for a Skyline you really should see this car you will not be dissapointed.

Hey Guys its time to drop the price $25400 Once you see this car in person you will see how clean it really is. 0404 858 429

pm sent.

No.

Yeah a Friend of mine had the qfm pads on his modified WRX and we were at a track day they seemed to go really well. He was happy. I think those guys can make a number of different compounds for their pads depending on the application. My friend's were just the standard sort of pad they offer. They are cheap too. let us know how you go... no great loss if they are no good I guess.