boosted_32

yeh mate

on hold

It has a drain plug on the bottom of the can.

.::Brand new in box::. Polished aluminium chrome can 160mm tall/88mm wide Oil drain plug Mounting kit included 1 meter of hose included Side fluid level indicator $100

FOR ALL CARS TURBO OR N/A This FUEL PRESSURE REGULATOR can provide precise consistent boost as much as twice the factory fuel flow. From your dedicate engine tuning, the FPR can boost from 20PSI to 85PSI, or as much as your fuel pump can sustained This unit is capable of supporting enough fuel flow for engines in excess of 850 horsepower, and is ideal for forced-induction engines since it is boost dependent (1:1 Ratio). the company who makes this product also supplys Nissan Japan Motosport to fit on there 1000hp godzilla, This is another thing you need if you want High Boost All the time!! the only competitor to this brand is Malpase this is anodized and comes with a 24 month Warranty. RRP of $289AUD Hose clamps and installation instructions are Included! $150

Hi every one I have a brand new heavy duty PBR clutch kit for the RB20DET comes with cover assembly, release bearing and pressure plate everything you would need to pull your stocka out and replace it with a H/D. I also have a RB20DET flywheel for sale aswell. For the both: $600 Clutch kit: $450ono Flywheel: $170ono

Hi guys Im selling my baby as I want to get a R32 GTR so I am willing to do a cash swap with someone who has a GTR and wants a GTS-T. Im located on the Gold Coast. Nissan Skyline 93 R32 GTS-T M-Spec 5 speed 250 RWHP Dyno Sheet available, maroon, Sunroof, Garret Bar & Plate Front Mount Intercooler, 3" S/steel Dump pipe, 3" Mandrel Bent Exhaust with big cannon, Greddy Electronic Boost Controller, Blitz ECU, autometer boost guage, Digital Turbo Timer, K & N Pod Filter, Strut Brace, Turbosmart Blow off Valve, GTR fuel pump, Climate Control, Lowered Suspension, Alpine CD player & New Speakers, 5% tinted windows, 18" deep dish chromies (3months old where brought brand new) 6months rego. The paint work on the car is very very clean and the interior is prefect. NON smokers car. Just had a service. This is a very clean example of an R32 real head turner $18,000 ono emails at [email protected] or call me on 0423771735 for more info or any questions.

Hi everyone I have a low mount s/s manifold for sale which sits turbo in original position and has the T3 Flange. This manifold is 1 beautiful piece of workmanship the welds are perfect and all the ports for the manifold have been ground down and polished smooth. this is not a cheap chinese manifold this is the real deal. Manifold is 2nd hand but has only been on car for a very short time. offers over $400 please. thanks

Price drop $2200 URGENT SALE!!! THIS IS THE BEST DEAL IN TOWN

350HP GARRETT GT-2540 TURBO T3 Flange Bolt on for Skyline R32 / A31 Cerfio RB20det , R33 / R34 RB25det ITEM BRAND NEW, comes with fitting kit for RB20det A31 / R32, turbo also bolt on R33/R34 RB25det, the Dump and housing is a bit rusty outside, has been sitting in warehouse for about 1 year, maybe wet weather cause it rust, but don't worry, its in prefect working conditon WHAT U SEE in picture IS ACTUAL WHAT U GET $2500 BARGIN!!! You cant even Buy just the turbo for this price at some shops im selling the whole lot for this price. do your homework

gold coast

as above please call me on 0423771735 if you can help me out or email me at [email protected]

pic has been uploaded to this thread.

price drop $1100 urgent sale.

Yes you have a point by getting your ECU remaped you can only have it tuned to 1 setting, I dont know much about the SAFC im not sure if you can have 2 different settings or not but I had a mate running one of these and its was a bit of a bitch to tune and for the extra couple of hunderd to get the ECU remaped its well worth it especially if you are intending to upgrade your injectors you will then need to move to a programable ECU or get the stocko remaped anyway, for thoes basic mods my car Had the stock ECU worked fine and wasnt leaning out but any other mods such as turbo upgrade and running more boost I would definatley recommend the remapping of the ECU over the SAFC.

Hi mate with thoes mods I was using the stock ECU and stock fuel system. I wouldnt recommend the SAFC just beacuse it olny allows you to chang the air/fuel mixtures and it still cost you bout $300-400 for one of them Im getting my standard ECU remapped for $650 including dyno time that way you can change alot more settings then just your fuel/air. sorry mate have never run my car down the 1/4 mile

HKS GT2510 - 300 PS Output COMPRESSOR: -Wheel- 63 Trim - 47.7 Inducer / 60.1 Major -Housing- 60 Inlet / 50 Outlet - 0.60 A/R TURBINE: -Wheel- 62 Trim - 53.0 Major / 41.7 Exducer -Housing- GT25 inlet / Internal GT25 oulet - 0.64 A/R turbo is used but in very good condition with no shaft play comes with hks actuator aswell and has the T3 flange so standard dump pipe for the RB20/25 will bolt straight right up. quick sale $1500ono

HKS GT2510 - 300 PS Output COMPRESSOR: -Wheel- 63 Trim - 47.7 Inducer / 60.1 Major -Housing- 60 Inlet / 50 Outlet - 0.60 A/R TURBINE: -Wheel- 62 Trim - 53.0 Major / 41.7 Exducer -Housing- GT25 inlet / Internal GT25 oulet - 0.64 A/R turbo is used but in very good condition with no shaft play comes with actuator aswell and has the T3 flange so standard dump pipe for the RB20/25 will bolt straight right up. quick sale $1500ono

dont really care if its 2nd hand so long as its in good nic, if n e one can help me out please pm me. thanks

Its the way you install the turbo, most people that buy these turbos are on a budget therefor they usually try and install the turbo themselves and theres your problem right there, there is alot of people out there that dont know the 1st thing about installing a turbo and are on a budget and try and install themselves to save a bit of $$$, they just think they can rip the old one off and slap the new one on.

HKS GT2510 - 300 PS Output COMPRESSOR: -Wheel- 63 Trim - 47.7 Inducer / 60.1 Major -Housing- 60 Inlet / 50 Outlet - 0.60 A/R TURBINE: -Wheel- 62 Trim - 53.0 Major / 41.7 Exducer -Housing- GT25 inlet / Internal GT25 oulet - 0.64 A/R Its a hell of alot bigger than a standard RB20 turbo though, do you think it would produce 300hp? with mods such as stainless manifold, stainless dump, 3" zorst front mount bigger injectors, fuel reg, bigger fuel pump running more boost?

has anyone ever put this turbo onto an RB20 and have any dyno results or any feedback how this would peform? Thanks

I need to upgrade my injectors for my RB20DET Im after either GTR injectors with resistor pack or any other bigger injectors which will fit straight in. PM me if you can help me out or email me at [email protected] cheers

as above. email me at [email protected] if you can help me out. thanks

Sold!