boosted_32

Sold!

bump

HAS ANY1 seen my quad turbo fully skick GTR R 34??? BUT I DRIVE MY VN its got just as much HP and looks shitta GOSE OFF

0423771735

It can be boosted up to 22psi and it made 230rwkw on a RB20 so by rights it should make more on a RB25

Im after an RB20det flywheel please email me at [email protected] if you can help me out. Thanks

Gold Coast

So did I jazza I agree with u on that.

would this be a good upgrade for the R32 GTS-T? what difference would it make? Thanks

T3/T04 Turbo fresh rebuild never been used since rebuilt it has been fitted with a RB25 exhaust housing that has been machined out to fit larger T3 steel exhaust wheel. It has a TO4 front compressor housing that has an A/R of 60. The front housing has been machined and polished all new seals and bushes and has also been fully balanced. Great upgrade for RB20, RB25, RB30, FJ20, and Z18 anything that has a T3 flange. P.S you will need to make no modifications what so ever to your dump pipe if you are fitting this turbo to a RB20/RB25 old dump pipe will bolt straight on. This turbo was built by ATS (Adelaide turbo services) and was built for 230rwkw for the RB20 $800 Email me at [email protected] for any further questions

Kits still for sale last day.........

I didnt think it was possible to run your car on lower than stock boost I know the with the 32 stock boost is 7psi Id say that would be the same with the ceffy as they both use the RB20 aswell so how do you run 6psi?

No my name isnt andrew and I live on the Gold coast

bump

My mate had and RB20 in a silvia and it had the stock RB20 turbo and running no boost as it didnt have a controller and all it had was an exhaust and he smoked me. becuase they are about 300kg lighter then an R32 skyline.

Mate I was there when it was dynoed and there is nothing wrong with his dyno at all he was quiet shocked at the time cause he said he has dynoed a few other 32's b4 will thos basic mods that didnt pull that sorta hp it was ran twice on the dyno 1st time was the 249.1rwhp and 2nd time was 248rwhp maybe cause it was hotter the 2nd time. The only mods at the time of the dyno was the 3"zorst with 3"s/s dump eletronic boost controller set @ 1 bar BOV, POD and Front mount. has a blitz accsess ECU now but was not on that at the time of dyno. will let you know what shes runs after all the new mods have been put on anyway. Thanks

Hi guys I can guarantee you that my car being an R32 skyline with the RB20DET was dynoed at 250rwhp well actually 249.1rwhp that’s also with 150,000kms on the clock as well. So hopefully by adding the other mods at the same boost of 1 bar should bring me close to 250rwkw. Any more feedback would be appreciated Thanks

Hi guys im just about to do a mild upgrade on my R32 skyline and would like some feedback. MODS CAR ALREADY HAS: 3" exhaust with 3" s/s dump Big 600x300x80 intercooler with 3" piping electronic boost controller BOV POD (Made 250rwhp @ 1bar with stock turbo) MODS THAT WILL BE GOIN ON: GTR fuel pump GTR injectors 444cc with resistor pack Adjustable fuel reg s/s low mount manifold T3/T4 turbo ( uses T4 .60 compressor housing with standard RB20 exhaust housing which has been machined out and fitted with a lager T3 steel exhasut wheel. The standard ecu will aslo be rechipped by P.I.T.S to suite the upgrades any have any idea of how much kw's I would be pulling @ wot psi with these upgrades b4 I get it dynoed??? also any feedback would be good on other mods I may need to support the mods that are goin on. Thanks

for anymore questions or info on this kit email me at [email protected] as I dont use this site much. Thanks

The AR's for this turbo are very common for upgrades to the R32 and R33 you will obviously find your car Cumming on to boost a bit later as it is a bigger turbo you might be sacrificing any where from 300 to 500rpm to what your stock turbo would come on to boost it can handle up to 20psi as well. Thanks

The AR's for this turbo are very common for upgrades to the R32 and R33 you will obviously find your car Cumming on to boost a bit later as it is a bigger turbo you might be sacrificing any where from 300 to 500rpm to what your stock turbo would come on to boost it can handle up to 20psi as well. Thanks

Sorry this is a whole kit im selling and not willing to separate Thanks

BRAND NEW TURBO KIT FOR RB20/RB25DET SPECS: · T3/T4 .50compressor housing, .63 exhaust housing, 5 Bolt exhaust. · (1) 90-degree and (1) 45-degree pipe for Downpipe · Brand new 8.7Psi Wastegate · Brand New Dual Type 50mm BOV · Set of Turbo accessories · One full set Oil Line and fittings · Oil return Line kit . Stainless (High mount) Manifold - STAINLESS with Lifetime Warranty Price is $1500 + delivery.

bump, bump just bump it up

Hi mate, yes this will aslo bolt straight up to the R34 GT-T manifold. The turbo is water and oil cooled and has never been fitted to a car so I cant answer weather you would have to get new water and oil lines but I do know you will have to change your dump pipe. Thanks