Shano3000

Can offer same deal as DFAULT if sale falls through. Exedy heavy duty clutch with 3,000km on it. Cheers, Shane

Got alot of parts for sale which i have accumulated over the years. Everything is in good working order unless stated otherwise. Located in Emerald, Victoria. Photos will be put onto photobucket http://s160.photobucket.com/albums/t177/Shano3000/ will take photos of parts on request aswell. Wrecking complete R33 GTS-T. RB25DET Complete Engine 100,000km. Will include everything minus engine loom. Very good condition with stock turbo. Had its major service 3,000km before crashed. All belts, idler tensioner, water pump etc 3000km old. Was running fine after crash - $2000 Gearbox, good condition - $1300 3,000km old exedy heavy duty clutch - $150 Tailshaft - $150 Diff - $150 3" turbo Back exhaust. Bellmouth dump/front pipe into jasma muffler - $400 FMIC Return flow kit. Includes generic fmic with Blitz return flow piping and all clamps/joiners. No holes need to be cut - $300 Front brakes With rotors and pads. Pads still got plenty left. Good condition - $350 Rear Brakes with rotors and pads. Good condition - $150 2 X Starter motors - $50 each Air Con pump - $50 2 X Gearbox Mounts - $80 each Rear Axels - $50 pair Rear bar painted white. Good condition. Appears to have been re-sprayed - $100 Rear bar Reo - $40 Boot lid with Series 1 spoiler - $50 Tail lights - $50 each undertray stone guard. Has a few small tears - $40 Car mats. Complete set - $50 Drivers side Head light. Off a 4 Door, chrome surround. A little bit yellow. $50 Lots of other parts available. Just let me know what you want and ill get back to you with pics/price. RB30DET Parts: Rb25de non vct head from a R32. Head has been cleaned, new valve stem seals, heavy duty springs for turbo application and surface machined flat. Inlet manifold, injectors and fuel rail, throttle body and all bolts/miscelanious pipes etc - $650 Good Condition S2 RB30 Bottom End, fully assembled. Brought as working motor and stripped head etc off - $75 Rb30 S2 block, disassembled. Includes crank, rods, cradle and block - 6 pack of Bundy New ACL Duralite cast RB30e pistons and rings, 1mm oversize. Suitable for RB30DET conversion. Will give compression of around 8.3-1. $250 New ACL Duraglide engine bearings. to suit RB30. .25mm oversize. includes rod bearings. $50 RB30 complete engine gasket kit with Headgasket. No sump gasket included - $100 RB26 Oil Pump. Came off R32 GTR. $100 RB20DET Exhaust Manifold. Will bolt to Rb25de head. $40 Will post smaller items at buyers expense. Pickup only for gearbox, engine etc unless you organise everything and pick-up from my house. Contact through here, PM, or message/call me on 0422816780. Cheers, Shane.

Sold to me.

Drove along side this guy on Burwood Hwy in Ferntree Gully in my GTR. Gave the thumbs up.....Was cool.

$650 delivered to your door firm. Cheers, Shane

$200 to get a pellet with everything on it delivered to Adelaide if interested.

Located in SE Melbourne. As it says in my details.

Parts include: Rb25de non vct head from a R32. Head has been cleaned, new valve stem seals, heavy duty springs for turbo application and surface machined flat. Inlet manifold, injectors and fuel rail, Coil packs, throttle body and all bolts/miscelanious pipes etc. Series 2 RB30 block, requires maching bore/hone etc. Crankshaft also requires machining. Standard rods & all bolts required for assembly. Good Condition S2 RB30 Bottom End, fully assembled. Brought as working motor and stripped head etc off New ACL cast RB30 pistons, rings and bearings. Pistons are 1mm oversize and bearings .25mm oversize. RB30 complete engine gasket kit with Headgasket. Pistons are for a RB30 non turbo, so when assembled with RB25DE head will give compression ratio of around 8.3-1 As stated the block will need to be bored 1mm oversize to accomodate the pistons and the crankshaft ground .25mm for the bearings. This is a complete package and once assembled will handle up to 350rwkw. Was planning to assemble this engine and put in my R32 although being a full time student i just dont have the cash. Price $1000 for the lot. Contact through PM or call on 0422816780. Pictures : http://s160.photobucket.com/albums/t177/Shano3000/

Hey, i had the head with all accesories delivered to me from qld for $100. So if you like i could seperate the package and you just source your own RB30 block/crank. PM me if interested.

Offers? will throw in the complete bottom end for free as a spare aswell.

Bump. Also have complete stock RB30 series 2 bottom end for sale which you could bolt this head to.

Thats him drifting in the white skyline at the end. So unless you got something constructive to say i think you should stfu.

bump. perfect for R32 as stock computer can run this head.

Saw that aswell, looked schmick!

Taken from original post: Pistons are for a RB30 non turbo, so when assembled with RB25DE head will give compression ratio of around 8.3-1

Parts include: Rb25de non vct head from a R32. Head has been cleaned, new valve stem seals, heavy duty springs for turbo application and surface machined flat. Inlet manifold, injectors and fuel rail, Coil packs, throttle body and all bolts/miscelanious pipes etc. Series 2 RB30 block, requires maching bore/hone etc. Crankshaft also requires machining. Standard rods & all bolts required for assembly. New ACL cast RB30 pistons, rings and bearings. Pistons are 1mm oversize and bearings .25mm oversize. RB30 complete engine gasket kit with Headgasket. Pistons are for a RB30 non turbo, so when assembled with RB25DE head will give compression ratio of around 8.3-1 As stated the block will need to be bored 1mm oversize to accomodate the pistons and the crankshaft ground .25mm for the bearings. This is a complete package and once assembled will handle up to 350rwkw. Was planning to assemble this engine and put in my R32 although being a full time student i just dont have the cash. Price $1500 for the lot. Contact through PM or call on [removed by admin at OP's request]. Pictures : http://s160.photobucket.com/albums/t177/Shano3000/

Just drove through belgrave on my way home to Emerald, Could see the fire front over the hill... Sirens going off in Emerald and choppers overhead aswell.

Wanker

$500 for complete car without Rego. Anyone?

OK guys, $1000 with 12 months rego included. So your really only paying $450 for the car. If doesn't sell gonna sell to wrecker taking up too much room. Great run around car in top condition!

Thanks mate but allready got a turbo sorted. Still looking for the other parts!

Thanks but mine is peeling aswell, thats why im after a new one. Cheers

Hey, Im after: RB25det Turbo. Must be in good working condition, with minimal to no shaft play etc. R32 gtst parts: Undertray stone guard Manual dash Surround Steering Wheel Interior Carpet If you have any of the parts let me know your price, either pm or call 0422816780. Located in Melb, would prefer pick-up. Cheers

http://www.carpoint.com.au/used-car/NISSAN....aspx?State=VIC

1988 R31 GX Sedan 250,000K's 12 months Rego included Car in Roadworthy condition Brand new battery fitted Excellent condition for age, Never had a single problem in the year i have owned it. serviced regulary. Located in Outer SE Melb. Pics: http://s160.photobucket.com/albums/t177/Shano3000/ Call 0422816780 or PM me on here -- NO SMS I WILL NOT REPLY --