BAILED

Steel turbos!

Can you buy panel filters that make good induction noise ?

What do they sound like ?

Hey Im after a HKS SS BOV. To suit a R32 GTR. Thanks

Just wondering where you got those back little pods that sit behind the wheel ? Looks alot better with them.

Whoever painted that HKS on the front of the cooler was smoking something good.

HKS SS BOV - Whats the conditon like ? How would i go about putting this onto a GTR R32 ? Is it complete? (has the three spoke fitting infront of the inlet)

Heading should be R32 GTR Airbox not R34! Hey Just wondering if there are any good panel filters out there that make good induction noise ? I dont want pods, i want to keep the airbox but want a good sound out of it. Also Im looking to put some gauges into my 32 GTR any ideas where to mount them. I would like three in the middle on the dash like ive seen in S7 RX7's on High Octane etc. Anyone know where i can get a mount that will fit on a 32 ? Thanks

That answer i gave ive known that for about 2 years and ive always thoght that was right. Has anyone got PROOF of where the name came from ?

can you send some pictures to [email protected]

How would i go about bolting this onto a R32 GTR ?

haha so true. so many different answers

Whats the difference between R34 GTR turbos and R34 GTR M-Spec turbos ?

$120 ?

Mine does it when i take off from the lights sometimes. Comes from the left of the car about half way down. Just one click. (R32 GTR)

Hey Just wondering say a motor is in the engine bay, how do you tell the difference to a R33 GTR motor compared to a R32 GTR motor. Just that ive heard some R33 motors from the importers in a R32 so how do you tell the difference by look at them ? Thanks

As far as i know the japanese did call them godzilla. The name came from the unpredicable nature of the ATTESSA system. Eg. When you push them hard through corners they can bite back if you are not careful and spin out.

R31Nismoid - i squezed the hole pritty much all the way down to the bottom of the engine and no change. oRiCLe - yeh im not sure eaither because yeh everyone else just takes that out and gets the 1.0 bar. this one has me stumped.... unless there is a boost controller somwhere on the car i dont know about while it was in japan ?

Whats it ment to look like ? I have run a UHF car arial into the pipe and its not getting blocked by anything. I can feel a indent at the point where the arial crosses the yellow part but definatly no change in the size of the gap. weird...

hey ive tryed doing that. its the PCM value your talking about isent it ? and the tube with the little yellow making on it that runs down towards the botton of the motor. there is nothing in there ? no restrictor ? but my car makes the stock boost....

Anyone ?

How far down is the restrictor ? someone said it was ment to be under the yellow band.

Does it even start to idle when you are driving and you put your foot down and it wont rev ?

What else would be required to stick this on a GTR ?

Hey Im wondering how to remove the restrictor on the R32 GTR's so that i can run around 15psi. Ive searched but dident come across much. Ive checked out the pipe on my car with the yellow band around it but dident find any metal restrictor in it ? So how do you do it and where is it ? Also is it safe to run 15psi ? I dont often drive my car so if i run 15psi and boost it every now and then should that be ok for the motor ? Thanks