neostagea

hi everyone i am chasing the part no for a set of tie rod ends for a series 1 stag. i couldn't find anything in the parts guide so is there anyone else that has needed to replace these. thanks in advance brad

well my mate is currently making up a fmic for me, i got him the cooler core and he is going to weld up the end tanks for me with the inlet and outlet on the one side so i can maintain all the factory piping (its great being mates with a bloke who welds stainless for a living, for a carton of beer you get a lot of work done )

hey mate, sad to hear you are leaving the stag community, but so sunday week makes it the sunday of the long weekend, will the stag still be there on sat night when i come round and say hi? cause i'm keen to see it.

yeah i'd be in for a cd if it gets made just pm me with details if it goes ahead

if there was a bit more damage i would be able to get it done but the missus wont allow the gtr conversion when there was so little damage. damn that. should have drove it into a brick wall or something to make it worth it. yeah i have sent just jap an email to see what they can get for me. but i must say it held up quite well for the impact cause it spun the other guy about 90 degs when i tagged his rear panel. but hey i would say served him right but cause he had a pile of crap XF falcon ute (which is patched all over in matt black) it barley made a mark on him.

can any please help me out here i am in need of a left headlight, parker and blinker from in the front bar and possibly a new front bar. i have shown interest in the lights that familka gtr has but i need to get prices from more than 1 source for the parts and i have been given the ok to see if anyone on here can help me. if you could please pm me so we don't get into any conflicts on pricing people may want to sell their parts for that would be great. attached is a pic of the damage to the car. if you want to know the dumb driver of the ford thought he had the right of way cause he had a green light but was turning right across my lane of traffic (he must have forgot about the give way rule dumb shit) and it could have been worse cause he may not have had insurance but just car are going to cover the majority of the cost if he wasn't insured which i think is awesome. Any help will be greatly appreciated. Thanks in advance guys and girls

yeah hi.series 1 beaut could not have timed it better . will confirm asap if i require them cause some c!@t in a crappy xf falcon ute just pulled out in front of me and smashed the front of me car up. i will not go into too much detail cause i would use too much french. but will let u know as soon as i find out if this pr*&k has insurance cause he drove off to go fishing cheers brad

sorry guys i'm out with it being on a saturday. mt bloody 2ic quit on wed so i can't swap days over with anyone now. u will need to take plenty of pics for all of us that can't go.

yeah it would be cool for me but i think i have a christening to go to of my neice. will let all know asap

yeah hey i have got the cooler in a mates shed atm, what we did was get the core without end tanks on it and cause he can do all custom work and welds stainless we put the intake and outlet on the same side of the cooler so we just have to run 40cm of pipe back to the factory piping and it looks completly stock. all up it will cost me $450 and it was a 600*300*100 PWR core. hey goldzilla i can get u them defi guages i will price them when i go back to work in a week cause i on holidays atm. will pm with details

yeah hey i had the same problem with mine not so long ago i checked all vacuum lines and no leak i then started checking everything it turned out to be the O2 sensor. hope you can get it fixed soon cause it is a bitch when it happens especially if your going around a round about and u got nothing the steering is heavy as hell

yeah weekend after easter sounds good. probably a bbq cause most of us that own stageas seem to have families that will probably come. somewhere in or around newie would be good

just a quick one to all those after trans coolers i have just had some PWR coolers come into Supercheap Auto that are priced at the same as our generic one $85 for one that is rated for a V8. If you are after one and have trouble getting hold of one PM me and i will get one for you cheers

yeah sorry mate i haven't got the cash in there yet. it will be there tomorrow been flat stick at work and f@ing unreliable employees don't make it much better but its all good now cause they don't work for me any more. but yeah mon 27/02/06 you will have the cash deposited.

yeah i think that green would look fat on a stag. something people havent seen before

yeah i'll be in that if its in newy or central coast but it will need to be on a sunday cause i work on saturdays. just make a date and i will be there.

yeah put me down to. ps i am the dude that served u at supercheap at taree wit da stag.

hey my bro passes someone in newy every couple of days. he lives near the uni and drives to maitland. it is silver and got 18's he thinks. you cant miss him he is in a bright yellow honda civic hatch with a mugen kit and chromies. would this possibly be anyone on here???

hey yeah that would have been me that served you and got u that cd player. if u would have mentioned who u were i could have given u a discount, and u were chatting up the wrong checkout chick if u wanted a phone no. so if on the off chance that u drive through Taree again call in

that would be mine. i am the manager of the supercheap store there. yes i know my avatar is not that car but it is what my car should look like in 12 months.

driving on the speed limit it is bout 1h 45 min north but when in a cop car i have done it in about 1 hr 10 min.

i had a look to find if there was a front bar removal guide on here and to my surprise there wasn't so i took some pics when i had removed my bar and thought others might want to know how so here it is first remove the grill by using the 2 clips on each side that attach it to the front bar then remove the plastic clips that hold the bar to the front re-enforcement bar. then remove the screws/blots that are on the sides of the bar. to get to these pull the plastic guard back from under the wheel arch. remove the blinkers from the bar then remove the screws from under the bar that is attached to the undertray plastic of the car. we then remove the parker lights . these come off by undoing the screw that is on the top ofparker light then insert flat head screwdriver under and lever directly straight forward. then you will see a small bolt on the side that goes through the bumper remove this. then once this is all done your front bar should come straight off... easy B)

thanks SK i have got this sorted now

if you can send me a copy of the file the logo is in i have a friend that makes up vinyls in any colour and size. don't know what costing would be but i can find out. wait til u see the pics of mine when i get the body sticker done cause i am sick of being called a volvo

i was contemplating doing this mod while working on the car today and when i removed the air box cover i discovered that there was a vaccum hose which had a bolt in the end of it <_< on looking at SK's pics the hose coming from the pipe on the left is connected to the right of the t piece where the hose with the yellow line is connected. and the hose with the yellow line on it has a bolt on the end of it. i have no idea what this could be doing??? do any of you know if this could cause any longterm damage as i have no idea how long it has been like this any advice would be appreciated