png godzilla

Try this mob Auschem NSW Pty Ltd 91 Newton Rd Wetherill Park NSW 2164 ph: (02) 9756 5559 Solvents

Getting mine done in Midnight Purple II as we speak ............cant wait to pick it up!!

IN4 is actually 1N4 which is made up of KLO - Pltinum Silver Effect & KM1 - Grey Effect (1N4=KLO+KM1)

Sure Does, plenty in fact................go Clear over Base (color & 2K Clear)

Ska/Beer Barron, your correct, Port Moresby Street Racer here belive me it has it's benifits. toluene is readilly available in Aus in 200ltr drums, i got those drums as part or our Gun Wash Thinner Order from a major solvent manufacturer. wish gun Wash was a good Octane booster at 0.70c a liter it's definately affordable Toluene is $1.70 per liter from the three sources i checked + $25 for the drum. the $1.70 includes a tarrif of 0.39c since July 1 2006, if not for the tarrif the price would be sensational. i just hope it gets me above 96 or so, fingers crossed...................................

I've got the PAR gearset in mine, with what i believe is a very practical street option, by way of having a straight cut 1st, 2nd & third to handle the punishment & a beefed up Helical 4th but still with Synchro Engagement, they make & supply their own upgraded 1-2 synchro hub, for 3-4 the stocker is oK. That way you have the strength but still the smooth drivability. uses your stock 5th & reverse gear. i think he said it will handle 1000hp sounds awesome too!! (like driving through three gears in reverse), then pull 4th & back to quiet cruising cost was $5,600

the paint on the cams depicts that they are stock GTR so i found out. but also the sock base circle diameter is 32mm, so looks like they might be some sort of re-grind. i'll set up a dial indicator on the bucket & measure the lift, i guess is easiest.. interesting what you find in imported cars, it's like a lucky dip some times

OK, they don't look aftermarket (not that i really know what i'd be looking for) but here's a pic. does this help at all?

i searched & searched the forums on how to identify cam shaft lift, didn't find the proceedure as such but found the Tomei factory cam shaft specs. for RB26DETT is 8.58/8.28 IN/EX then i searched Google on how to measure. rocker armed engines use lobe lift & rocker ration from what i can gather.................makes sense. where OHC engines it appears the measurement from the backside of the lobe over the top of the lobe, minus the base circle = lift. so if my cams in my RB26 are 41mm over the lobes & the base circle without the lobe is 31.2mm does it mean the lift is 9.8mm, or am i missing something here?? can anybody sched some light please?

Thanks rev, even 96 would be good in conjunction with the water/methanol injection. 91 sucks & really limits everything i do here!! if i can get 98 with 25% toluene i'm a happy man. i've ordered 5 x 200ltr drums in our next solvent order, so will be here in a few weeks to try! as for tuning, i'm still learning, have to get my head around the fuel maps on the Power FC, have a wide band O2 fitted, so keeping an eye on things.. no Dyno's here either, so i'm the tuner! thanks for the heads up!

1stly, Must be something drastically wrong with your triple plate if it can't hold 400awhp As for the box, mine went out in style, street racing, quick change into 3rd................gotta hate that noise!! like ferni, i have a twin plate solid centre...............fixed the problem by buying a PAR gearset 1st to 4th & loaded that up. from what i've heard std gearbox is ok if you treat it nice.................."treating it nice" & "I own a GTR" don't think should be used in the same sentence

just realised rev's post was 2003 anybody techo minded in fuel & additives out there? i'd really like to know what increase i can get out of 91 with Toluene?

Arkon, i have the -10's fitted to my R32 GTR & got the HKS actuators as the -10's don't come with actuators. i have plenty of bolt on mods but no cams or anything as yet. i got these turbo's because i have another engine & can put up with the Lag untill i put stage 2 in. basically the -10 won't hit more than 0.5bar untill 5000 RPM, but when they come on, boy do they come on, 1.2, 1.3, whatever the're set to in an instant!! I like em, big plans ahead!! here's the mods at present with the -10's (laggy as hell) Tommei S/S Extractors Twin Garrett GT2860R (707160-10)0.6/0.64A/R (450hp models) HKS Actuators HKS Dump Pipes HKS Front Pipe Cat removed & 3” full back Splitfire coils NGK HITOP Iridium Plugs APEXI FC & Hand Controller 600x300x125 FMIC (cut the front out to match the IC/8” Ducted air tubes to POD filters) APEXI POD intake NISMO FUEL PUMP Nismo Adjustable Fuel Pressure Regulator SARD 720cc injectors (not yet installed) Water/Methanol Injection Wide band A/F meter HKS Twin Plate Clutch PAR Racing Products Gear Set, straight cut 1st, 2nd & 3rd Helical 4th & 5th, Beefed up Synchro shift. Greaddy Prfec B Spec II Boost controller Apexi RSM Speed Limiter cut & G Sensor

hey Rev, great stats hope you help me with mine. We only have 91 octane pump gas here, that's it, no other options. so i'm currently running water/methanol injection to overcome this, (well i have to use Metholated Spirits instead of Methanol because i can't get Methanol either). it works well. 91 octane at 1.2 bar with the water injection & around 30 on the Power FC Knockometer. I'm looking at importing some 200ltr drums of Toluene from Australia to mix at 25% with the c rappy 91 octane we get here. Any idea what rating i would end up with?? I have asked the question of the fuel companies here but no-one seems to know. i'm really hoping i can get a min of 96? PS: Also i was told by the manufacturers in Australia that as of 1st July in Toluene, Xylene, Methanol, Ethanol & Isopropyl Alcohol has a Tarrif on it because people are using these products for Fuel or Fuel additives & the Govt. reckon they are missing out on revenue!! they told me Toluene has a Tarriff of 0.38143c per liter. hopefully i won't have to pay that for Export out of Australia, not sure still checking..................

what about the RB20 MAF, isn't that the same size as the Z32? i Know the plugs on the RB20 MAF's are a straight plug in to the RB26 plug because i have a couple here that i was going to put on my RB26, still hope to unless there's some problem. then as far as i know i just have to select the RB25 MAF on the Apexi Power FC?? pic is RB20 MAF