BNR32

The whole list has now been updated with prices for every part..... This should provke a little more interest...... Oh yeah, also selling the shells that the parts came from, got the following: -R32 GTS-4 x1 -R32 GTS-T x1 -BNR32 GTR x 2 -R33 GTS-T x1 -PRIUS -180SX Type X x1 Dont know what i want for the shells, but the rails and tunnel and bits and pieces are worth money if you prang your car and want to fix it.... A couple of the cuts have been butchered for rails already though... Tom

Merli, I have seen some of your posts and you seem to know whats going on... Have a read of the latest Zoom magazine and youll see that you never have to replace hte stock GTR BOV's. they flow ample enough air for any one that will grace the pages of this forum and dont leak like some a/m BOV's.... Just athought, not burning anyone here... Tom

Prices have been updated for the ENKEI Rims, i got the go ahead to sell them for $1200 incl. freight Also, standard GTS-T rims for $820 incl . freight and there have been some other ad-ins, just scroll to the top and check and also check out the pictures Tom

VOLVO Truck Intercoler A Bit bigger than My TRUST DRAG SPL intercooler fitted to my 32 GTR... Tanks look easily modifiable.... $250 without freight or $300 to your door Tom

CATERPILLAR diesel turbo Bloody Massive!! Would make a good coffee table if you put some glass on top of it! My shoe in the photograph gives you an indication of its size.... Will prob cost about $80 to freight due to its weight! Good for all those turbo freaks out there, this will impress the boys! Tom

BNR34 GTR RIMS x 2..... DAMAGED, UNSURE IF REPAIRABLE! GOOD FOR HOSEREELS OR SOMETHING OR MAKE SOME BUCKS IF YOU CAN REPAIR THEM!! Email me for price: [email protected] Regards Tom

Enkei Rims 17" 5 Stud off a 1992 R-32 GTS-T UPDATED.............. $1200 Including Freight!!!!! MUST SELL

Yep, I have a few bts, i think they are HKS Email me for shots and offer me a price: [email protected] Tom

Got a twin plate for you... Depends on what model your GTR is though! If its a 1994 late model then its a pul type clutch.. If before then it is a push type.. I have an OS GIKEN push type twin plate and a NISMO GMAX II pull type, both reconditioned, lokking at $1000 for either Tom

As stated bits from half cuts: PHOTOS FURTHER DOWN!! Not including freight unless otherwise stated!! BNR32 GTR Computers (Veilside, Access, Standard) $450 each ###OFFERS### BNR32 GTR Center Instrument/Guage Cluster (two of) $200 Each BNR32 GTR Rear Seat, Not faded, very good condition $250 ###REDUCED#### BNR32 GTR Passengers guard x2 (one red one is black both good to bolt straight on) $450 each ***1xSOLD, 1xREMAINING***** BNR32 GTR Front Drivers Guard (slight Damage, undercoated, needs repair) $250 *****SOLD******* BNR32 GTR Gearbox APPROX $2000 BNR32 GTR Standard Air Box $200 #####REDUCED##### BNR32 GTR Front Pipes (standard) $200 #####REDUCED##### BNR32 GTR Dash (good condition) $200 *****SOLD***** R32 GTS-T Standard wheels with 50% Tyres $720 Incl. freight #####REDUCED##### R32 GTS-T Enkei 5 Stud Rims 50% Front 20% Rear tyres ******SOLD****** R32 GTS-4 Short Shoft kit (bolts ontop of standard gearbox) $200 ECR-33 GTS-T Full stainless steel cat back exhaust $550 Space Saver spare wheels (yellow in coloour on Toyota PRIUS remaining) $50 BNR34 GTR Rims, damaged, no tyres, only 2 rims (good for hose reels or somethings similar) Pics Below *****SOLD***** AUTOSPORT KEVLAR RACE SEAT, GTI-R pulsar rail, can be modifed to fit skyline *****SOLD******** Volvo Truck Intercoler, (a bit bigger than a TRUST drag core) $300 Incl. Freight Huge Truck Turbo (not good for any car application it is about 400mm across, GOOD FOR COFFEE TABLE) Pics Below $200 Regards, Tom

I can do one for a GTS-T also! $250 without a/flow meter inclduing freight, where are you located?

I can freight tomorrow if youd like, ill email you my BSB and A/C number so that you can dump the cash and ill send it! Is it a BNR32 GTR or GTS-T??? GTR will cost you $300 with filter Email: [email protected] Regards, Tom

Price is about rght in my opinion! Problem is that with BCNR33 GTR's stock examples seem to fetch around the same money as modified ones such as yours! Because of the new complaince system, modified GTR's will become more rare as you cannot bring in modified cars and it will be therefore very expensive to modify GTR's. If i were you, id try and hold onto it for another 6 months and watch your money grow! The only way to modify GTR's from now on is to buy second hand parts and fit them or buy brand new parts, not a cheap exercise! It was good to be able to buy the cars wth all the mods, it jst cant be done anymore. You should be able to get around $50 000 for yours in a few months assuming that it is in tip top condition! Just a thought! Regards, Tom

ah ok, ill think on it! Thanks Tom

I purchased a car similar to this from a japanese auction site. My car was damaged and i was still very 'lucky' to nab it before somone else did! How did you come across this gem? I have always wondered if you could offer Japanese people money for thier cars so that we can import them without having to modify! The problem now is that under the new SEVS legislation, all cars must be absolutely bog stock to comply, so we can all forget about buying off the richtor GTR's from Japan! Good luck with the sale! Wouldnt mind some pics just out of interest, but understand if you dont have the time! [email protected] Regards, tom Goold Newcastle, NSW Australia

Whats Modelista like? I heard it was a bit of a let down but has cool mods etc!

Good Try turbostst, hope the poor bastard you ripped will hunt you down!

Blitz: Point taken

Sure GARRETT might supply HKS but HKS and GARRETT strictly follow different naming rights and guidelines for their turbocharger ranges!!

Garrett do not make a 2530, they make a GT25 or GT28 with a horsepower assocaited number. E.g a GT25 350 HP turbo or a GT28 450 HP turbo.... HKS are the only ones that name them GT2530.. The turbos in the pics are way too small in compressor cover to be a GT2530 anyway, read it, it says 'A/R 0.42' on the photos and a GT2530 has an A/R on the compressor of 0.64!!!!!! Surely that makes sense! It aint hard to understand! Regards, Tom

Dismantling Nissan Skyline R 32 GTS4! All parts can be seperated Dismantled full car but it was cut, so ive got all the rear sub frame, diff, wheels, d/shafts, g/box, engine, ecu, interior etc.... Offers on all parts! Reagrds, Tom

Mick, I have been dicking around with people to swap my BBS LM Evolution wheels. I think i may have setup a trade with a set of BNR34 GTR rims but i am unsure of this.... I will be happy to swap with you though.. My rims will definitely fit your car as i have bolted my rims on an R33 GTS-T to move it around the work shop. My tyres are brand new under 1000 Kms 245/45/17 Dunlop rear and Falken front... If you are interested i will email you a pic... They are similar to R32 GTR V-spec wheels but deeper dish and the are BBS. They are currently on my R32 GTR and are worth around $2200 per corner without tyres... Anyway, email me: [email protected] if you are interested! Tom

Expression of Interest on BNR34 N1 Trubos: 0.60 A/R Compressors 0.48 A/R Exh Housings Bolt on to stock location Ball bearing Adjustable actuator rods Braced actuators (no flex) Steel wheels HKS stainless dump pipes with seperator Etc... These turbos are similar spec to GT2530 except the 2530 is a 0.64 comp cover, but other than that not much difference... Rated to [email protected] Bar... I am looking at going for a bigger setup, these tubos are immacualte, can give photos if needed. Serious offers only, estimating around $4000... OFFERS

Hungry 6 I have a stock one but am in Newcastle, NSW... Why do you want to change to standard? AtomicBomberMan: Yes the RB26DETT copmuter is very tunable... Especially the Mines one that Hungry6 has because it would already have the EPROM holder and new chip in it.. All you would need to get done is an EPROM live tune and new chip in the same spot to get it to your personal specifications. Should only cost you a couple of hundred bucks and some dyno time as Mines have done all the hard work of soldering in the holster for the chip etc etc... Tom

Christian, I tried this but it still aks for an http:// adress for the file... Because the file is on my hard drive and i have no web-space then i dont know how i will give a link to the pic on my hard drive! Excuse my ingnorance on this matter and thanks for the help! BTW, did you get rid of your rims? Im keen to trade if you like? Wont be ready for a bit over a month though! Regards, Tom