M I K E

nigel, i think you've been mis-informed. r33gtr is 12mm so will bolt up to r32/r33 etc no worries. it's only r34gt-t and r34gt-r that are the 14mm bolts and require modding the stub axle. chris, they will be a direct bolt on for you mate, i can't remember how much clearance the racing harts have - just check how much room between the back of the spoke and your current caliper and let me know what it is. even if you can't fit it, we know those wheels could do with 25mm spacers anyway did you even read the first post mate? lol it says front only haha

looking to be a no show from me.. back is still buggered and haven't been able to play with the car

pm kidafa, chris may be keen

drive to adelaide and i'd swap you for my vs-kf. 18x9.5+15 all round - clear brembos too

^^^ i'm assuming you're talking about witties? http://nissansilvia.com/forums/index.php?a...t&id=222697

i'm not sure if i like ford breeze although i'm sure it will look good and would probably get my vote over bayside blue.. it's just so overplayed these days although god damn hot

17x9+30 seems to keep most people satisfied (ie r33gtr wheel) and you can run a 235/45 on them

not to mention, ryan, that this car is one of THE most intense sounding rigs i have ever heard

your post confuses me.. had to read it like 3 times lol so your'e saying you are going to change to 17's or you want to stay with 18's? either way, i personally wouldn't run less than an 8.5" wide wheel on a stag, the guards can take it and they are big,heavy, fast cars

what'd it come out of?

how much were you looking at for the whole wreck out of interest? and how much you want for the spoiler?

haha no sarcasm needed rodders, i'm just worried about the skyline tag alongs more than anything

and just read the route, looks amazing

people are going to deff want to watch their driving now, since these forums are read suits me fine but

location?

endless SSS are awesome pads, best street level pad before you get into their track only based series. from memory rated in the 0-500deg range. think i'll buy some to go with these nice new slotted rotors i have here

i've got 33gtr brembos on my rs-v and i must say i'm very impressed with how well they work, particularly on such a large car. I don't think i could ever go back to driving a car without the brembo ABS combination now to be honest. so a little puzzled to think that you'd not be happy with them?

i don't know about anyone else, but the pic links don't work for me "Page not found But now that you're here, go ahead and search through the billions of photos, images and videos on Photobucket."

wait.. what?? why dude i'll pass the message on about the coils for you to that bloke i was telling you about - let me know how much you're after

they'll fit but will look ASS in my opinion. they are narrow and have a high offset.. lose-lose in my books sit ~25mm in from a gtr wheel roughly and if it's your car in your avatar with the carbon guard flares the wheels are going to be sunken as

these are the new ones http://www.c-red.com.au/index.php/newparts...nd/category/rg/ you'll have oodles of inner clearance with a 9+5. it'll sit almost identicle to the outside of my wheels and you'll have an extra 15mm of room on the inside sounds like your boat is going to look mighty nice when you're finished.. low offset, ride height.. win in my books

lol this is my current height with tein coilovers which i think is perfect. i still have some adjustment left in the them, could probably go another 20mm lower all round if i wanted to. my current eyebrow heights are ~320mm that being said my new coilovers just arrived waiting to be fitted.. 2 way height adjustable racing gear jobbies - decided base height adjustable was deff a better option to keep spring rates decent.. if you really want when i fit them next week i can take some photos of just how low they can go?

it will, what offset though? 17x9+30 will sit nicely on the rear with those tyre sizes

yep, they are nice bonnets for sure. i have a feeling they may be discontinued too

pete, BooDah, has a manual stag wreck sitting at his parents house, hassle him about the gearbox won't find any interior shit from it though, cos the interior got burnt there is a manual conversion thread on here with pictures that goes through everything - they reckon the auto tailshaft fits fine