Jden

Hello Ladies & Gentlemen, I have a FREE RB20DET long block I need gone in the next week due to moving house. Cylinder 5 was low on compression and I swapped it out for a wrecker engine but have since sold the skyline. It's missing lots of parts on the outside, i.e no manifolds, no wiring etc. I need this GONE, i dont want to part anything out and you will need to bring your own engine crane and/or 2-3 big blokes. I will post some pictures this afternoon. Located in Wynnum, sms is best - Jay 0435426342

Price?

buuump, engine crane & stand are sold.

buuump, engine crane & stand are sold.

Sold my skyline a few months ago so looking to get rid of some parts I have laying around. Located in Wynnum QLD & prefer not to post because I'm a lazy flamin mongrel. 4 x S15 Rims with tyres Few scratches on the rims but pretty good overall, 2 tyres are good and 2 no good. $200 Engine Crane Good condition besides the grubby handprints all over it - $200 RB20DET Has low compression in cyl 5 and missing lots of stuff. - $100 ? Castrol Syntrax Gearbox Oil - 75W-90 Got 2 unopened bottles of this - $30 Split dump-pipe Suits standard turbo - $40 Timing Light Bought this for about $99 sell for $50, barely used. BLiTZ Blow Off Valve Atmo BOV - $50 Engine Stand $75 Got lots of other bits & pieces, heatshields, std exhaust manifold, std fuel pump, random alloy 3" 90' bend etc etc... let me know if you want anything and I can get better pics.

Sold my skyline a few months ago so looking to get rid of some parts I have laying around. Located in Wynnum QLD & prefer not to post because I'm a lazy flamin mongrel. 4 x S15 Rims with tyres Few scratches on the rims but pretty good overall, 2 tyres are good and 2 no good. $200 Engine Crane Good condition besides the grubby handprints all over it - $200 RB20DET Has low compression in cyl 5 and missing lots of stuff. - $100 ? Castrol Syntrax Gearbox Oil - 75W-90 Got 2 unopened bottles of this - $30 Split dump-pipe Suits standard turbo - $40 Timing Light Bought this for about $99 sell for $50, barely used. BLiTZ Blow Off Valve Atmo BOV - $50 Engine Stand $75 Got lots of other bits & pieces, heatshields, std exhaust manifold, std fuel pump, random alloy 3" 90' bend etc etc... let me know if you want anything and I can get better pics.

Another good one is to remove your pod / airbox so you have access to the afm and while the car is idling cover the afm with your hand so no air can get in. Then you should be able to hear the hiss of where the air is getting into the intake.

Thanks for the quick replies and pms guys! That makes sense now that I stop and think about it.

Nothing but BP 98

Hey Guys, Firstly abit of background on whats going on, I have my new wrecker RB20 on the stand and I am trying to change the timing belt. In the process I have also installed adjustable cam gears and new tensioner & idler bearings. My problem is that I can get the belt on fine and all the timing marks line up but when I turn the engine over a few times and try and bring it back to TDC the belt is always 3 teeth out? I have pulled the belt on and off about 3 times but every time its 3 teeth out. I'm not really sure whats going on? Is it something to do with the belt tension or maybe the cam gears are on wrong? Any ideas would be much appreciated. Pics attached.

RB20 & RB25 turbos are both now sold

RB20 & RB25 turbos are both now sold

I'll have a look but cant guarantee anything as its been a while since it was on the car.

Airbox sold to Chris, everything else is still here. Send me a PM if your interested in anything.

I can probably already guess your answer to this but are you interested in separating the cam gears from the engine?

Bit of an update; Airbox is SOLD The Silencer is 4.5 inches Price for the CD Player is $40.

Hi Guys, Got I few things laying around the garage that I have no use for. 1. Stock R32 RB20 turbo, came off my car at about 150,000km. Seems to be fine with no shaft play, no actuator on it at the moment but will come with compressor elbow - $100 2. Stock R33 RB25 Turbo, came off a wrecked series 2 R33 and has no shaft play and both wheels are in good nick. I have been running it for about 8 months at 12psi with no problems. Comes with RB20 actuator attached for easy 10psi straight up & compressor elbow. - $250 3. Stock GTST Airbox, great if you need to pass a defect or something - $100 4. Stock R32 side mount intercooler plus various intercooler pipes, reasonable condition - $20 5. BLITZ Atmo Blow off valve - in good condition, makes a nice sound & caused no problems for me might be possible to plumb back if you changed the trumpet - $75 6. JVC MP3 Head unit, its a bit basic but works fine. Model #KD-G405 7. Stock GTST wing in black, comes with brake light. Average condition as it has been sitting around in the garage for a while. Will probably come up ok with a cut & polish - $50 8. Cannon silencer thing, suits a 5 or 6 inch cannon. Will confirm when I find my tape measure. - $10 9. R32 horn, might be good if yours has given up. - $10 Located in Wynnum QLD, will post at buyer's expense.

Hi Guys, Got I few things laying around the garage that I have no use for. 1. Stock R32 RB20 turbo, came off my car at about 150,000km. Seems to be fine with no shaft play, no actuator on it at the moment but will come with compressor elbow - $100 2. Stock R33 RB25 Turbo, came off a wrecked series 2 R33 and has no shaft play and both wheels are in good nick. I have been running it for about 8 months at 12psi with no problems. Comes with RB20 actuator attached for easy 10psi straight up & compressor elbow. - $250 3. Stock GTST Airbox, great if you need to pass a defect or something - $100 4. Stock R32 side mount intercooler plus various intercooler pipes, reasonable condition - $20 5. BLITZ Atmo Blow off valve - in good condition, makes a nice sound & caused no problems for me might be possible to plumb back if you changed the trumpet - $75 6. JVC MP3 Head unit, its a bit basic but works fine. Model #KD-G405 7. Stock GTST wing in black, comes with brake light. Average condition as it has been sitting around in the garage for a while. Will probably come up ok with a cut & polish - $50 8. Cannon silencer thing, suits a 5 or 6 inch cannon. Will confirm when I find my tape measure. - $10 9. R32 horn, might be good if yours has given up. - $10 Located in Wynnum, will post at buyer's expense.

Sounds like a boost leak? Check your intercooler joins

What colour is the bar and what condition?

How much for just the engine? Dont need gearbox, clutch, loom or turbo. Also how many kms on it?

Hey Guys, Just had my rb20 compression tested and only have 90psi in cyl 5 so looking for a good low km engine, just the block & head dont need manifolds or coilpacks or anything. Let me know if you have something in Brisbane/Gold Coast area. Cheers

Hey Guys, Just had my rb20 compression tested and only have 90psi in cyl 5 so looking for a good low km engine, just the block & head dont need manifolds or coilpacks or anything. Let me know if you have something in Brisbane/Gold Coast area. Cheers

That sucks, guess I will have to get the car towed to the tuner

Just a quick question for those of you who have already done this. Will the car run on the standard ECU with the GTR injectors? I.E will I be able to drive 30kms to get my nistune put in? Cheers.