MAD R32 GTR !

Item: R32 GTR Forged Rims Age: 15 years Condition: Almost perfect Price: $1200 To Fit: Pretty much any skyline Location: Brookvale For sale are my race tyres i've only used once at wakefield. As pictured the tyres are almost new. Selling tyres complete with rims. Need them gone These tyres are a street slick so you can use them for everyday driving No longer good to me as i've upgraded my brakes and they just dont fit Tyres cost me $340 per corner so grab a bargain. Good set to have lying around for track days Item: R32 GTR Front Bar Age: 3 years Condition: Fair Price: $220 To Fit: R32 Skyline Location: Brookvale Fibreglass front bar. Complete with genuine lower lip and mesh Needs some TLC. In primer

Go the slots buddy ! Everyone loves a good slot or even better, 2 slots

will they suit rb26 GTR?

got a r32 gtr pump May be the same $100 its yours

hey would you swap the R33 GTR rims for some R32 GTR rims with semi slicks falken azenis 80% left. Only done 1 Wakefield day

hey still for sale?

hey got a fibreglass bumper. needs a little work its got mesh and lower lip $220 its yours

mate got some r32 GTR rims with fairly new falken azenis street slick tires. Only done 1 track day at wakefield Make us an offer

mate check all your inter cooler pipes and silicon hoses Sounds like one may of come off when you where boosting just a suggestion

f**k man ! I'd be so interested but im in Sydney I'm currently a foreman for a workshop and im working 6 days a week So over it. just want a normal 5 day job again You got accommodation up there for me? Good luck

bumpi !

FOR SALE!!! Modified 1983 DATSUN 1200 UTE 95% Complete Project Car Standard CA18 Turbo Engine (S13) Standard ECU 5 Speed Manuel Transmission (S13) Custom Engine Subframe and Gearbox Mount Front Mount Intercooler 2 1/2" Side Exhaust Pipe Custom Intake Pipework VS Commodore Radiator Intergrated Engine Wiring Harness with Standard Harness Custom Rear Tail Shaft Locked Standard Diff New Shocks All Round 120Y Disc Brake Front End New Carpet and Door Trims R31 (RB30) Fuel Tank and EFI Fuel Pump Standard 12" Rims (May have some spare alloys for keen buyer) New Throttle Cable Hydraulic Clutch Master/Slave Cylinders with Braded Line Things needed to complete project - Electric Thermo Fan Interior needs to be secured seats, dash, wiring etc... Exterior headlights and front grill assembly Body needs work in some areas if you want it looking clean. Brakes need bleeding Some rust repairs needed to outer sills and floor pan I'd love to keep this car but i need the storage space $3600.00 HAPPY BIDDING!!! Currently on Ebay. Check for Pics http://cgi.ebay.com.au/ws/eBayISAPI.dll?ViewItem&rd=1&item=150244265180&ssPageName=STRK:MESE:IT&ih=005 SMS me on 0413798123 for any other questions

its called turn your rattle gun up until the knob stops turning. then rattle until there is no air left ! hahaha fuc'ing tight Never had a prob

Item:Blitz SBC - i-D SPEC - R Boost Controller Age: 6 months Price:$450.00 To Fit: Anything turbo charged Location: Brookvale, Sydney (willing to post at buyers expense) Contact: Vince Comments: SMS on 0413798123 or at [email protected] NOTE: The boost solinoid has been plastic welded as the fitting broke when removing my bonnet. As seen in pictures The unit still works perfectly fine, never had a problem with it Must be one of the best boost controllers on the market Pics posted Comes complete with instruction manuel, wiring harnesses, vaccum line, boost solinoid, control box and screen The SBC i-D (Sequential Boost Controller i-D) is the latest boost controller offer by BLITZ®. this unique boost controller represents the cutting edge in boost controller technology. The SBC i-D features the same dual solenoid design as the DSBC for maximum boost response and the capability to hold up to 36.75psi (2.5 bar). The SBC i-D is 1/2 din size and it is compatible with internal actuators and external wastegates. Product Features - Boost Unit - Boost can be displayed in standard and metric measurements (PSI, bar, kPa, and kg/cm2) - Four Channels - Has 4 different programmable boost settings. - Boost Gauge - The SBC i-D can display boost in digital and graphical form. - Peak Hold - SBC i-D can record the highest boost achieved by the vehicle. - Boost Warning and Limiter - This is a safety function that allows the operator to set the amount of boost decrease in the event of over boost. Warning is in both visual and audible. - Manual or Automatic boost setting - The SBC i-D allows the user the choose how the boost is set. - Manual - Sets boost in ratio, from 0-100. By using the manual setting, this allows the boost controller to give maximum boost - Automatic - Sets boost directly, just dial in desired boost amount. - Record and Replay- SBC i-D has the ability to record and replay any information up to 99 seconds. The SBC i-D can also record and replay information on the Power Meter i-D and Optional Data (Power Meter i-D and SBC Optional Harness required). Replay can be fast forwarded and replayed in 2x and 5x. - Display - The SBC i-D can display up to 6 different vehicle reading. Each reading can be display in both digital and graph form. SBC i-D has the option to display 5 other vehicle reading (Power Meter i-D and SBC Optional Harness required). With Power Meter i-D, the SBC i-D can display SPEED and POWER. With SBC Optional Harness, the SBC i-D can display 3 different electronic outputs from the ECU. Screen Display - Boost - Digital and Graph Form - OPT1/SPEED - (Power Meter i-D required to display speed) ¡V Digital and Graphic form. - OPT2/POWER - (Power Meter i-D required to display power) - Digital and Graphic form. - DATA 1 - (SBC Optional Harness required) - Digital and Graphic form. - DATA 2 - (SBC Optional Harness required) - Digital and Graphic form. - DATA 3 - (SBC Optional Harness required) - Digital and Graphic form. - OPT2/POWER - (Power Meter i-D required to display power) - Digital and Graphic form. - DATA 1 - (SBC Optional Harness required) - Digital and Graphic form. - DATA 2 - (SBC Optional Harness required) - Digital and Graphic form. - DATA 3 - (SBC Optional Harness required) - Digital and Graphic form. - DATA 1-3 Display - This boost controller has the ability to display any electronic output from the vehicle ECU (SBC Optional Harness required). It can display almost any voltage output from the computer (i.e.: TPS, temperature, pressure, A/F, injector pulse and etc.). DATA 1-3 readings can also be recorded and replayed. - Speed Map - This unique feature allows the SBC i-D to control boost according to the speed of the vehicle (Power Meter i-D required). Speed Map boost control can be set up from a 2 stage to a 4 stage control, which allows the user to set boost according to his driving style. Speed in transfer by infrared between the Power Meter i-D and SBC i-D.

got a complete set of standard shocks and lowered pedders springs for ya. To suit r32 GTR (good cond) $500

Price drop $800 Must go

Item: Brand New Hi-Mount Stainless Steel Manifold Age: 2 weeks Condition: Faultless Price: $900 To Fit: RB26 R32 R33 R34 GTR Location: Brookvale NSW 2100 Contact: Vince Comments: SMS Prefered or PM Manifold for sale as seen at http://www.gcg.com.au/Catalogue_Menus/Mani...ett_himount.htm. Check it out All nice welds, thick alloy, nice thick flanges and plates Not a cheapy Can either fit t03 & t04 split entry flanges Must be modified to suit t03 flange Stainless Steel High-Mount Exhaust Manifold to suit Nissan RB26DETT Suits Turbochargers with T3 Flange (GT30/40, GT35/40) External Wastegate Port to suit the Tial 44mm Wastegate

nice! 1 is pretty much in the middle of the block, 90% sure its oil supply between 3&4 cylinders 3 looks like a drain plug of some description, maybe water drain

Can anyone help out?!?!

got a complete r32 GTR rear diff for sale, overhauled never been used since $450 with abs sensors too [email protected]

interested in the GTR seat [email protected] thanks

Sorry! Theres the pic now

hey! Im doing a single turbo (T04Z) conversion on my R32 gtr and i need to pick up some water and oil lines for the turbo Can anyone identify the holes in this block pic? Im taking 1. Oil Supply 2. Water Supply 3. Water drain plug 4 & 5. Oil drains Which oil drain do i use and where should i pick up the water supply, oil supply etc... If someone has got any pics on a similar setup can you please upload Thanks heaps

mate im running a t04z turbo on my r32 GTR If it had the t04 flange i'd take it where did you get it from? can you weld a t04 flange on this manifold?

will a r32 GTR rear end fit, if so i got everything