Mase

The emanage and harness is $530, how does that go more than $950? The emanage allows you to retain stock ECU operations such as cold start and air conditioning. It does not need to be 'set up' as you could say and therefore would require less setting up time. Emanage has similar functions that the PowerFC has, it lacks the ability to lower the rev limit however. Any tune shop can tune an emanage if they're capable of oeprating a dyno. All it requires is the USB cable to connect to the emanage and the software. The same sort of set up with most aftermarket ECU's. The USB cable can be purchased as well as software through nengun or greenlines online stores and is much cheaper than a hand controller. You just plug into your laptop install the software and you're tuning. Any 'home' tuner can adjust their air/fuel ratio's with a wideban sensor. I have nothing against the PowerFC, it was more the fact that you approached it very one minded and just 'assumed' the emanage was a silly option when in fact for the money it costs, which is quite a lot less than the PowerFC, then the Emanage is quite a good aftermarket ECU option.

you obviously havent researched much into emanage's?? An emanage can be purchased and delivered with ignition and injector harness for $490 delivered. Or alternatively you could purchase a car specific harness which including the unit it approx 530. This means it bolts straight in and you can drive to the tune shop as it will have no adjustments made and be running what your ECU has set up. Then just find someone who can tune it and you're set.

Hey, a fellow club member of ours bought a rb25det gearbox with SR20DET bellhousing. The gearbox is extremely small. Could we please have part numbers of SR20DET 5 speed RB25DET 5 speed RB20DET 5 speed RB20DE 5 speed RB25DE 5 speed Also, would it be possibel to fit an RB25DET's gearbox internals into a SR20DET gearbox? Any help would be greatly appreciated. Thanks Jayson

no offense to the seller, but you only have recently joined. has anyone bought anything off this guy yet??? I'm interested in the turbo, but hesitant to purchase off a new forum member. Cheers

Hey mate, do you mean the rotors and $200? I've sent you a pm anyway. cheers Jayson

Still for sale, would be interested to swap for 4 stud rims as i need some more drift rims.

I've searched the forums for 20 mins now and still couldn't find how much fluid a RB20DET silver top gearbox takes. Anyone give me an answer? cheers Jayson

list updated

Is that all that it comes with? No lines or anything? I will send you a pm actually, otherwise i'll forget to come back and check. cheers

Had planned to keep these for my 5 stud conversion but selling to pay for a rebuild on my engine and other mods. Made in Osaka Japan according to label. 17 x 9" can't find an offset on there after looking for a while today. 5 x 114 2 piece light rims, bit of dish on them for all you dish heads 245 wide bridgestones 50% plus, tyres are getting a little hard $400 [email protected] 0401 669 900 (Please dont pm as i don't participate as much since selling my Laurel) Will swap for with cash adjustments either way T28 or similar sized turbo Aftermarket sway bars for S13 Hydraulic handbrake setup 16" or 17" 4 x 114.3 rims Cheers Jayson

Selling everything to pay for my rebuild in my onevia and to put my silvia on the road. I'm in brisbane but will post. 1 x SR20DET Automatic transmission $100 (comes with one line to radiator) 1 x SR20DET auto flywheel $30 1 x Automatic shifter assembly $20 1 x silver s13 mirror, slight chip off top of mirror that sits under door rubber $40 1 x black s13 mirror, snapped where the base joins the mirror (glass and motor PC) $20 1 x CA18 wing $20 1 x pair of s13/cefiro/laurel rear camber arms (stock items) $40 pair 2 x front mud flaps off s13 (grey) $10 1 x S13 Auto Tailshaft $40 S13 engine mounts $80 CA18 air con compressor $50 S13 condensor and cannister for air con $50 CA18DET ECU $150 3 x Laurel/cefiro front bar indicators $30 each pair $50 1 x sr20det guard extension, (sits on the bottom of the stock guards to match up with the front bar) grey $20 1 x SR20DET exhaust manifold $40 1 x pair silvia/180 splash guards (inside wheel arch) have holes made for cooler piping $40 2 x 180sx headlight motors (left and right), no plugs and wires short, but motors work A1 $40 Random bits of piping $10 each, will sell the whole lot cheap 1 x S13 front pipe, 3" mostly, but bolts up to stock dump $30 1 x crossover pipe for SR20DE $25 1 x set of coil pack brackets for RB20DET $20 1 x Ignitor Pack RB20DET $50 1 x RB20DET intake pipe to turbo with pipe off it $30 1 x FET turbo timer $25 1 x power window switch driver's side PC $40 1 x stock s13 front bar grille for turbo s13 stock bar $20 1 x carbon cannister $25 1 x accelerator cable for sil/180 $30 1 x 90degree bend mild steel needs clean up $10 1 x power steering reservouir for non hicas s13, 32 etc $30 1 x 'C' type gearbox crossmember for s13, r32, 1 x CA18DET/maybe DE also power steering pump $40 1 x brake pedal for automatic $20 1 x full car loom not including engine loom for silvia $250 1 x silvia rear bar, straight but needs paint $25 1 x s13 rear seats, grey, GC $70 1 x silvia boot and back of back seat carpet $40 In brisbane but will post. [email protected] 0401 669 900 cheers Jayson Pics can be seen here page with pics I don't have any other parts for sale, only the ones listed above so please don't ask. Will swap parts for plus cash either way......... t28 S14 front sway bar R32 gtr rear sway bar aftermarket sway bars for s13 5 stud conversion hubs

Now have my SR20DET piping kit up for sale to get $$ together for rings and bearings $300 firm

back up the top, gotta rebuild my SR20 so taking reasonable offers.

bangs head on desk, would be perfect for my 3 pairs of drift rims, all 16's!! What sort of prices would you be wanting for say 6 of them (pm me) and i'll check out some prices on frieght to see if it's worth it. thanks

As the topic states, I have a Non hicas power steering pump, i'm installing the rb20det into a Hicas Silvia. I'm chasing a hicas power steering pump. I know the non hicas ones are in high demand for people removing hicas from their cars for drift/track use etc. So if you have a good working order one then lets swap. Brisbane only. Please reply via email [email protected] or by phone 0401 669 900. cheers Jayson PS. For RB20DET

geez you're a knob avalonea, the guy was just offering his suggestions!!! Besides.... if avalonea had full control of it, he'd be putting in a dodgey SR20DET!!!

bump

hey mate, Shocks are the last thing to go hey. They're keeping the car up so i'll have to wait a few weeks before i sell them. cheers

nur spec yes i have boot trims. Im pretty sure they're in good condition also. MFC05 you have a pm also.

whole car sold tonight. thanks

cooler is off a 91 SR20det. send me an email if you're still interested on [email protected] and i'll get a photo sent back to you. cheers Jayson

still for sale

CA18DET engine loom $150 CA18DET engine mounts (i'm told can be used for SR also) $80 Full aircon setup from S13 including condensor, lines, air con compressor $200

sold pending full payment

found one thanks