coparts41

Well it seems that we have a cockhead mechanic , loks like he pulled the whole 1/2 shaft out to do an upright replacement and never seated it back into the circlip groove , hench the sensor wasn`t reading . slight tap in and all fixed , Thanks for your reply Bob much appreciated.

Has anyone had issues with the ABS /4wd light coming on . Seems from several posts that it could be related to the hand brake that was sticky. The handbrake would not come up after being released and you would have to lift it manually . Anyway coming home tonight the ABS and 4WD lights came on , I have checked the sensors but read a post that implied that the hand brake was at fault , any one had the same problem and how did you fix it . regards dennis

Well I have had our Stagea for 6 years now and bought the car with Tein suspension , Rays Volts 18x8 + 32 with 235x40`s , 25mm spacers all around , 1 1/4 degrees camber front and back , lowered 40mm as well and have no issues . However it depends on many variables and in the end , who sets up the suspension.

sound like the bleed wasn`t long or good enough , if its gurgling then there is still air in the system somewhere , may need a pressure bleed. I always use a funnel and piece of tube 300+ mm .but you may require somthing different,

Got the Dolfin kit 40mm lowered and still have to watch everthing we do ,Adams got the aftermarket bar on his and think too low.

there are intercooles around that have both pipes out the same side , much easier to install and looks original in the engine bay.

common as cats doo , You can get them from Bursons , repco etc anywhere from $10 to $30 depends where you get it from and about an hour to fix.

count me in

You do realize that the back seats have to be removed and the belts must go back as straight as possible so as when you go over you body weight doesn`t go on your shoulders >back , Cams stipulation read the regs also road authority.

clever

high resistance joint in the battery , put a volt meter on it when your cranking and see what you get.

Ringwood speedo`s have an interface that is programmable . Wires into the speedo trigger circuit and can be adjusted via GPS and a bit of playing around . Although price does include them setting it up.

check your airfilter if you have a Pod , my sons R31 (rb25t) was sucking in the primary pipe feeding the turbo and giving him a flat spot, told him to clean or dump the pod and now all OK.

mine had the Xenon`s when I got it engineered , same as the Teins and the 18x8 volts , all engineered at the same time.

maybe r34 or r33 not sure about the rest

I`m in

I agree with Scotty whats wrong with the stock cams ,there are a lot of mods that can be done to a RB25 before you have to change cams unless you have very deep pockets, Cams , good springs , retainers maybe head machining ,port work ,injectors ECU where do you stop and also a lot of patience driving around a car that you struggle to drive. I am not saying not to modify it as most of us do but do what you can without cam changes, what gearbox are you running , what sort of daytime driving , is it a regular track/daily driver.I have been building and racing cars for the last 40 years and some have been an absolute bastard to drive to work in heavy traffic , on the open road absolute magic , around town a pain in the arse

doesn`t mean that we cant meet somewhere before or just after Chrissy just for a chat ,I live in the yarra valley and you can come up anytime.

seems that not too many people are interested at the moment , probably to close to Christmas anyway , maybe we can organize something for Feb next year. shame to see the cruises die in the bum.

yep , we have had a few in the past and always pretty good ,think its about time we had another seeing the weather is getting better ,anyone got any clues on where we can go.some clues please

Yep r33 brakes bolt straight on to a s2 no mods required

Maybe the speed sensor is playing up ,put a consult on it and check

Hi, my son has a set of 18x8 for sale if anyone is interested.

nice outcome !

had the same problem with Kamakazi motors here in Melbourne , ripped me of to the tune of $800 and there is nothing I can do .Just be cautious.