Blitz

Given the amount of money you have spent on your engine, I would be going for a good set of Japanese rods, ie Tomei which can be had for reasonable money these days - not REV's.

Honestly not sure on that one - I know of RB26 cams being used in RB20's as an upgrade but when it comes to using them in an RB25 it would be worth checking with your mechanic.

Paul and Ken, I have replied to you both. Stan: The lighter is already on hold, will let you know if it falls through Nick

Hardly surprising when the car is running a T88-38GK on a standard capacity RB26.

Over 500rwkw on 1.2 bar? I highly doubt that

HKS rates them at 400PS each Gav: What sort of boost were you running to produce ~550rwhp? Sounds like something is holding you back if thats the most you can squeeze out of them

Watching the two foot fly-kick through the windshield certainly made my day Im sure it will be on YouTube shortly if not already

The outer diameter is 100mm

Hey guys, I have located more spare parts that I have purchased and ended up having spare which need to go. 1. Genuine HPI Engine Damper Kit - BCNR33 - New Helps prolong the life of your engine mounts by reducing wear due to excessive engine movement. A worthwhile addition for any modified GTR $230 2. Nismo Billet Oil Cap - New SOLD! Suitable for Skyline, Silvia etc 3. Nismo Veruspeed Oil Filters - Suit S14/S15 (x2) - New Each Nismo Veruspeed oil filter offers 21% less pressure loss, 24% increase in filtration, 10% less flow resistance, and 37% increased life. $45 Each 4. Nismo Veruspeed Oil Filters - Suit RB20/RB25/RB26/CA18 (x2) - New SOLD Each Nismo Veruspeed oil filter offers 21% less pressure loss, 24% increase in filtration, 10% less flow resistance, and 37% increased life. 5. Nismo Racing Fashion Lighter - Used SOLD! Speaks for itself really - For the Nismo junkie $15 6. Length Of Braided Hose - Unused I have a significant length of stainless braided hose which I never ended up using - Pefect for radiator hose etc. $50 (Pickup only) 7. R33 GTR Factory Mats Set - Used SOLD! Completed 5-piece genuine R33 GTR mat set - Very good condition - Hard to find $200 - (Pickup Only) 8. R33 GTR Factory Cams - Used Removed during engine build - No longer needed. $150 9. Trust Polished Single Turbo Inlet Pipe (Y Pipe) - Used SOLD! Genuine Trust single turbo inlet pipe (Y Pipe) completed with silicon joiners and hose clamps. These pipes are extremely hard to come by and this one took me a long long time to locate. The Trust inlet pipe for single turbo setups facilitates the use of twin Z32 type air flow meters in conjunction with a single turbo setup and comes nicely polished. $200 10. R33 GTR Factory ECU - Used Removed during engine build - No longer needed. $250 11. R33 GTR Washer Bottle - Used Replaced with oil breather tank - No longer needed $40 12. R33 GTS-T Washer Bottle - Used No longer needed $40 13. RB25DET Coil Pack Cover - Used SOLD! No longer needed $40

I believe that is a blow off valve return pipe that can be blocked off if need be.

An N1 pump will be more than ample for your application.

Who told you the N1 was 'the best' - And more to the point, best for what exactly? Sorry to hear about your engine

If you were building a 900HP engine, you would surely do your research and opt for a JUN or Trust equivilent pump in the first place. Like R31 Nismoid said, its funny how people just blame the N1 pump when in many cases people havent properly researched their oil pump requirements properly and just fitted an N1 pump to a car that may require something with more flow capacity/higher strength.

Hi guys, Once again due to a change in plans for my GTR, I have for sale one genuine Trust single turbo inlet pipe (Y Pipe) completed with silicon joiners and hose clamps. These pipes are extremely hard to come by and this one took me a long long time to locate. The Trust inlet pipe for single turbo setups facilitates the use of twin Z32 type air flow meters in conjunction with a single turbo setup and comes nicely polished. I am chasing $200 and pickup is available in Sydney or postage available at buyers expense. Thanks Nick

Hi all, Due to a change in plans, I now have for sale this very very rare Genuine Top Secret full carbon fibre dash mount triple gauge console/holder which I had intended to fit to my GTR. To my knowledge these are no longer available and are extremely hard to find, not to mention hideously expensive to by new. Like the rest of Top Secret Japan's product lineup, the craftsmenship in this gauge holder is truely amazing - It is made entirely from quality carbon fibre with a high gloss finish. The holder will accomodate 3 x 60mm gauges and is specially designed to be mounted on top of the dash in the centre and even includes a vented section underneath, preventing your gauges from excessive heat build-up While this gauge holder is intended for use with BCNR33 i would imagine it could possibly also be used with R33 GTS-T's as well. I am chasing $220 and pickup is available in Sydney or postage available at buyers expense. Thanks Nick

Not sure if you need it, but if you are chasing the RB25 centre coil pack cover as well i have one for sale. Pm me if you are interested.

Not a big deal at all

Any 600 x 300 x 76mm intercooler on an R33 GTS-T will require some trimming to the front bar

I have just had one of the JJR Type 2 intercooler kits fitted to my R32 GTS-T and the quality and fit of the kit is outstanding. The piping and clamps are of very high quality and they dont use the tiny weak clamps that some other kits on the market do. The cores themselves have been proven in applications exceeding 300rwkw so for the majority of vehicles they are an excellent choice. I will post a pic later tonight if I have a moment. Value for money? unbeatable - Plus the owner Steve is on SAU under the username 'Just Jap' and they offer most of their products to SAU members at a discount.

Sold

Sorry but that isnt in the ball park. Indications of price they go for are in the first post - The price I have posted is very very cheap and I am only letting them go as I have way to many parts around that I really dont need.

http://www.skylinesaustralia.com/forums/in...howtopic=135016

Hi all, I have for sale this SRS super strength 4 ply silicon upper intercooler hose kit as removed from my R33 GTR (Should also suit R32 GTR) These hoses are much more durable and longer lasting than the factory rubber intercooler pipes on GTR's which regularly perish and deteriorate, resulting in cracks and holes in your intercooler hoses which in turn will cause your car to run poorly. Normally as a set of 4 (upper and lower), these hoses retail anywhere from $500 to $800 new. I am looking for a quick sale at $160 for the pair, including 4 ultra heavy duty pirtek type hose clamps which will ensure that your hoses will NOT blow off once properly fastened. - The hose clamps alone are worth a considerable amount of money. Reason for sale? I have now fitted a Trust hard pipe kit to compliment the rest of my engine bay so these are no longer required. Located in Sydney - Pickup preferred but happy to post at buyers expense

how many of each have you got?

Terrible effort James.