Line 3

i took my car to ultra tune and i found out that my master and slave cylander both are rooted my brother is parting out his 300zx z32 and i need to know if his master cylander and slave cylander will fit on my r33 it will save me like $400 any help will he helpfull thanks

im pretty sure i spotted DRD-00F driving on the hume highway yesterday in his r31 with the black bonnet than i sware i saw him again in his 31 on the north kiama bypass at around 1.30pm-11pm. i was on the side of the road waiting for a tow truck cause my clutch failed...

hey guys. i've bled the system and i'm getting some pressure back in the clutch but not much. i've been told the slave and master cylinder may be stuffed, my brother has his 300zx wreck in the garage and he has both the master and slave cylinders both in good nick. can i use the z32 master and slave cylinder in my r33 gts?

ok this is line3's brother line3 was just out driving only a few minutes down the road on the highway, he was driving normally until he went to change gear and he lost ALL pressure in his clutch. he's managed to get the car off the road but he cant get any pressure in the clutch at all. he never had a problem with the clutch and has never fidled with it ever. i know the basics of the clutch system from my z32 but not familiar with the skyline. its a N/A r33 gts manual. if anyone knows what i should look at or can give me any advice or even help please reply. the cars on the side of the highway and we will not be leaving it there

bump!

i have a apexi catback exhaust for sale it is 3" with a 4.5"cannon on the end pm me for pics price $400 any one interested pm me

im keen i went on the nissan slivia cruise to gong and it wasnt too bad one part of the road is pulled up but i just went heeps slow and it was fine get a date im keen

hey guys nizr33 was that you on the silvia cruise down national park the other week? i think some of us gong people should meet up for a cruise or something... i wouldnt mind seeing that torana with the rb25det in it

pm sent

pretty sure it was manual... my brother was ready to buy this... shame it sold.

have u still got exhaust?? pm me

i need to raise as much money as i can so i can buy a new car, as much as i LOVE these wheels there is no point in me having them if there going to sit in my garage. this is the only pic i have from before i got the new tyres. how they looked on the zed these are a two piece forged wheel, there very light and looks great. the +22 offset looks incredible on a zed, depending on how low you go they will fit with a simple guard roll but a guard pull will enable perfect fitment with a good set of spacers and coilovers. they have got brand new 225/45 r17 tyres, i cannot remember the brand atm but the tread is great and has only had about a months use. the wheels can do with a solid polish, i have done part of the "dish" and it came out great, i just never really had the time to sit down in the garage and hand polish the wheels. i'm looking for $1200, these are a two piece forged japanese wheel, brand new they sell for $1130 EACH! pm or call james 0432645307

ok i've got a set of z32 front calipers sitting on my wreck. these are the next step up in nissans brake range between the r33 gtst and the r33 gtr brembo's. i'm looking for $300 for the front calipers and $150 for the rears.

i got a vr commodore ute for sale its got a rebuilt engine new clutch lsd new brakes new exhaust and more and more parts replaced on it so its like brand new would you trade it with some cash your way?? thanks

how about $400 for the rear brake set up with the whole handbrake cable and handbrake itself. not interested in parting out smaller items like this, i work night shift so i sleep in the morning and can only work on the car on saturday or sunday mornings. i need the larger stuff sold, after this the car will be cut up with an oxy and taken to be sold for scrap metal with whatever is left on the shell.

bump!

everything is there, other then the afm and a few zed related parts that would not be of any use to a skyline. just to note: the standard zed brakes are the sumitomo 4 pot calipers WITH the heat sink fins (r33 gtst dont have the fins) whihc are the next step up in nissan brake list. make an offer. the gearbox is still for sale, its manual, good nick and is just waiting to be chucked into a skyline or a silvia! $1200 gearbox, shifter & possibly tailshaft. the DIFF is the better of the two used in the 300zx, the N/A gets the better one of the two with the better ratios. i'm not sure atm but if your interested in the diff i'll findout and let you know the differences. either way the z32 N/A diff is better! the engineis fine, ran well and i never had a problem with it. willing to let it go for $1200 with ecu and loom (needs loom to AFM.) other parts are available, send PM and i'll let you know. cheers

sorry mate sold the AFM

pm sent

ok guys my brother just smashed his n/a 300zx last week its only got a little bit of front end damage he has decided to part it out so if anyone wants some parts pm me and ill give you a price we want it gone asap so parts are pretty cheep... or if anyone is intrested in buying it $3500 thats all we are asking pm and ill send some pics thanks

what the frak! i payed $1.35 still for v power? damm wollongong

its not too bad i just noticed there getting slower and was worried i thorght it might be like something in the motor of the window ill try this silicone spray thanks for the help

hey all ive noticed on my r33 that the power windows are starting to get slower when going up and down is there anything i can do to fix this or replace a part?? thanks

yeh i relised that but it will fit onto my n/a r33?

hey mate how much do you want for the sub box?? pm back if you still have it thanks