HR31-PASSAGE

i've just tried fitting the rb25det crank sprocket on my rb30 crank but it wont fit seem to be to small. i'm guessing i'll be needing the rb30 crank sprocket right, are they smaller in diameter??? also where can i get these from? cheers

bump

bump

bump

after a good condition s3 front bar/bumper. let me know what ya got "with pictures" i'm located in brissy but willing to get my self a courier to pick it up

ok so the oil feed on the out side of that part (not though the oil thread fitting) right?

ok cool so pretty much the thread is the return... thanx for the info didn't wanna get it wrong & blow my new built engine up... ta

oh ok so on the rb30, the oil doesn't feed from the little screw in oil filter thread. feeds from the outside part on the oil filter block,,, correct?? i've attached a pic of the rb30 block oil filter partto make sure we are on the same track.... cheers

hey mate question with that oil cooler set up, i'm stuck knowing where to put the braided lines from the sandwich plate on the block, you know how there are 2 fittings on it, one must be a return & the other bumps oil to the oil filter/relocater? then there are 2 fittings on the oil filter/relocater. 1 feeds oil from the sandwich plate & the other feeds oil to the oil cooler... hope you understands & can help cause i dont wanna get it wrong & f**k my engine due to lack of oil lol also here's a diagram i found where is says "spin on adapter is that the correct way the hoses have to go on the rb30? or does the oil feed from the oil filter thread on the block? second pic is of my sandwich plate...

ok here's a diagram i found where is says "spin on adapter is that the correct way the hoses have to go on the rb30? or does the oil feed from the oil filter thread on the block?

ok this is the best thread i have found, i'm stuck knowing where to put the braided lines from the sandwich plate on the block, you know how there are 2 fittings on it, one must be a return & the other bumps oil to the oil filter/relocater? then there are 2 fittings on the oil filter/relocater. 1 feeds oil from the sandwich plate & the other feeds oil to the oil cooler... hope someone understands & can help cause i dont wanna get it wrong & f**k my engine due to lack of oil lol cheers edit: ok here's a diagram i found where is says "spin on adapter is that the correct way the hoses have to go on the rb30? or does the oil feed from the oil filter thread on the block?

ok i'm stuck knowing where to put the braided lines from the sandwich plate on the block, you know how there are 2 fittings on it, one must be a return & the other bumps oil to the oil filter/relocater? then there are 2 fittings on the oil filter/relocater. 1 feeds oil from the sandwich plate & the other feeds oil to the oil cooler... hope someone understands & can help cause i dont wanna get it wrong & f**k my engine due to lack of oil lol cheers

PICS>

ttt

i've done some searches but cant seem to find anything saying or showing the was the lines should be. can you give me any links mate?

thanx guys but i got one today. does it matter what way the lines are connected up from the sandwich plate on the block?????

ttt

ttt

ttt

wtb engine oil cooler kit show me what you got can arrange courier so doesn't really matter where your located

pm me some details on them, kg, inner diameter, length etc etc also pics would be awesome

ttt

.

ttt

ttt