datsfreak

SOLD - thanks guys

some pics-- swap or $150?

$350 with out the extra pipes?

hi, my r33 has been tuned by "car station" in japan. Ive opened up the ecu box and there is a socket with a removable chip on the board. If I changed my setup eg AFM and injectors could you supply a new chip for my box to run the new gear? thanks

hi, Im wanting to put a FMIC on my s1 r33, and not sure which way to go. Ive got a 600X300X75 bar and plate new in my garage but with no piping, does anyone sell just the pipes? Ive read that some kits pipes hit the washer bottle and/or the fan- and I didnt really want to modify more then I have too. Are any kits mod friendly? Ive also got a stealth return flow cooler but I think ill sell that and go the bigger x flow type.(its bigger and thicker). Anyways I appriecate your thoughts

Hi guys, I only just bought this on these forums and now have a change of plans. Its a return flow cooler from just jap- the previous owner has made up some stainless hot/cold pipes for the engine bay. Anyways $390 is what I paid so thats what i'm asking. I'm in Toowoomba QLD(1 and half hour from bris). Pickup(this weekend) beats post. But post ok. thanks

Hi, Ive got a new 600X300X75 bar and plate intercooler and want to swap for a stainless steel dump/front pipe combo (prefer a bellmouth one) for my r33 gts. Or swap for a new intank pump. pm me for pics of the cooler. Im in QLD but can post. thanks scott

fluroman - pls pm me asap

Fluroman - I stll have not got the cooler yet.. The tracking number you gave me didnt work.. please contact me ASAP

then i go backup

is that just a cooler or a cooler kit? If its a full kit that will fit a r33 - Ill go backup

thankyou for posting this! I know its a old thread but its be so helpful. This was on my r33 s1- you could perhaps post a link to this on the forced induction pages today I did a new belt ,gates racing - $115 at repco new pump vl commodore $80 at supercheap new adj cam gear $60 off these forums- just jap type. balancer puller $35 supercheap timing light $80 supercheap(my old one had died -it only cost $20 damn it). Set at 4 degree retard for the exhaust cam. I dont know if its the adj cam or because the old belt was stretched but it has a bit more poke now. for example it now crabs sideways a bit in 1st that it didnt do before the cambelt /adj cam gear . very good, thanks for the "how to". Q - to get 15 degrees advance my crank angle sensor is on its max rotation but before it was is the middle.. Is this because the exhaust cam that runs the crank angle sensor, is now rotated? Should I be running 11 degrees now because of this?(15 standard)

you did not mention your BOV.. Ive read others having probs like yours after going aftermarket( leaking at low revs and idle)..at least it would be easy to test

pwr how about these? look under nissan--- its a stealth type

thanks My bro is after some r32 parts, can you pm me your email to pass it on to him?

would you have a aftermarket gts dump pipe?? pm me

last drop b4 ebay $70

ive got a (chipped in japan) manual ecu. Unplugged the auto compute and ecu r, plugged in the new ecu and it works great. Getting a rb20 actuator and will put that on after the new exhaust and cooler goes on. Thanks for the advice guys.

I just got a 3" cat back exhaust and now need a 3" dump/front pipe. I dont mind either split or bellmouth, but would prefer stainless im in QLD and post is ok. Anyone done a high mount convo and have a std turbo pipe spare? pm me thanks

thats good info( i didnt know about the no - cost option) With the RB20 actuator, is that 10psi with the rb25 boost controller or iwith a direct connection to the inlet nipple??? thank for the info

Thankyou! That was what I was thinking but I really wanted someone else to verify it.

Drops to $80 posted for both

Here is a pic of my cam gear... If I turn the inner wheel counter-clockwise, it will indicate A(advanced) on the marks.. So this is wrong?

Might be a stupid question but... my cheap brand adj gear has the R on the left and A on the right of its adjustment. BUT looking at pictures of HKS adj gears it is the other way around For example look about half way down this following ad for parts, he is selling a cheap brand gear but behind it there is a HKS gear box--the markings are opposite. ad with adj cam gear Whats the deal.? The motor turns clockwise(looking from the front) so the cheap gear it correct, ummmm, is it?

My s1 r33 had a auto-manual convo done before I bought it. Ive been driving it around with the auto computer but ive just bought a chipped ECU so I have no need for them. So.. a r33 s1 ECU and Auto computer both for $100 inc post(to syd or mel). Or $90 pickup Toowoomba QLD. thanks