ekul

Up for sale is my rb25 nissan cefiro 5 speed Runs a series 2 rb25 full stock setup only ever seen 9psi. 88.000km on motor and 134.000kms on car, chassis is in top nick no accident damage Has new cv boots, recently been serviced with new oil, plugs and filter (not due for another 7000km ), has tein adjustable coilovers,hd clutch, adjustable upper castor arms, autometer colbalt water temp gauage, boost guage, turbo smart boost t. really good condition black interior, jvc touch screen head unit, new cefiro plastic rain gutters, gtr fuel pump, lsd diff, new rear magnaflow muffler, good tread on tyres, blitz air filter. comes with rb20 ecu so you can get nistune installed. rear center plastic with cefiro on it instead of nissan. comes with a new timing belt for the 110,000 service when its due. Last owners mate was a mechnic and did all the work himself have gone over it myself and it has been done well,all the electrics work including all the mirrors and power windows, ive always taken it easy and warmed it up before driving, comes with a 100mm sidemount cooler. Paint wise i would give it a 7/10 , has a few stone chips and bit of damage on the front left bar driveline i would give it a 9/10 never had any issues hasnt let me down beside when i purchased the car the vct solenoid wasnt working so changed that and works fine now. Only bad points: bit of gutter rash on both rear rims, speedo is out 13km/h so would need a new cable if that bothers you, and front left of bar has a little bit of damage, also small amount of rust on cowl pannel, easy fix. other than that no rust anywhere else on car Other than that great car sounds great, drives great and never had cop issues. selling up as bought another car no swaps thanks 0466 376 039

6 nismo 550cc injectors suit rb25, just been flow tested come back all good havent been on a car since. $350 0466376039

bump $850

Hey, Up for sale is a set of rims, they are SSR's unsure on model it says model VS inside of rim. All tyres at a good %90+, never been thrashed on just been driving with them on my ute. 5 x 114.3 Fronts are 18x8.5 +35 offset with potenza tyres 235/40/r18 as you may know these are awesome quaility tyres grip like your on a train track and arent cheap. Rears are 18x9.0 +35 offset with achilles tyres 235/40/r18 I may be able to get ahold of the centrecaps if you want them, rims are in great condition with no gutter rash. They dont have a hole lot of dish but with some spacers and some flush guard fitment they will look awesome. I want $1000 for them. Contact me on 0466 376 039 Will post at buyers expense. No swaps Thanks.

Hey guys up for sale is my micotech lt-12 with plug and play for a rb25, i think it should also work for a rb20. Comes with plug and play, microtech lt-12 ecu, brand new 3 plugs made by microtech, also includes a tune for 318kw rb25 ( unsure of setup ) It came out of a crashed skyline and was hit near the ecu, theres proberly a 0.3mm dent in the ecu cover, i bought this off a mate who got the ecu off the person that had the accident and the car still ran after crashed... ecu was inspected by a qualifed auto electrication and couldnt see any damage to the board, along with my mate i purchased it off inspected it before he purchased it, so i dont belive there would be any issues. Just being honest so people are aware of what they are paying for not out to rip off people. Reason for sale, had issues with nistune so quickly purchased another ecu that my mate had to get the car on the road was going to install it in my rb30 vl but its single cam and didnt want to mess around with a configured ecu for a 25 and mess around running coil packs and getting rb25 cas to work with the 30, ended up buying a haltech. can check my username ekul on calaisturbo have a trader raiting on there. $600 will post anywhere in australia for $15 express. Your welcome to inspect the ecu. 0466 376 039 thanks. http://imageshack.us/photo/my-images/855/microtech1.jpg/ http://imageshack.us/photo/my-images/189/microtech.jpg/

Hey guys up for sale is my micotech lt-12 with plug and play for a rb25, i think it should also work for a rb20. Comes with plug and play, microtech lt-12 ecu, brand new 3 plugs made by microtech, also includes a tune for 318kw rb25 ( unsure of setup ) It came out of a crashed skyline and was hit near the ecu, theres proberly a 0.3mm dent in the ecu cover, i bought this off a mate who got the ecu off the person that had the accident and the car still ran after crashed... ecu was inspected by a qualifed auto electrication and couldnt see any damage to the board, along with my mate i purchased it off inspected it before he purchased it, so i dont belive there would be any issues. Just being honest so people are aware of what they are paying for not out to rip off people. Reason for sale, had issues with nistune so quickly purchased another ecu that my mate had to get the car on the road was going to install it in my rb30 vl but its single cam and didnt want to mess around with a configured ecu for a 25 and mess around running coil packs and getting rb25 cas to work with the 30, ended up buying a haltech. can check my username ekul on calaisturbo have a trader raiting on there. $600 will post anywhere in australia for $15 express. Your welcome to inspect the ecu. 0466 376 039 thanks. http://imageshack.us/photo/my-images/189/microtech.jpg/ http://imageshack.us/photo/my-images/855/microtech1.jpg/

after a rb25 ignition module. 0466 376 039 cheers

after a rb25 ignition module cheers

looks great

Hey guys, After 6 440cc gtr injectors, would prefer them to be hose tail, as there going onto a vl fuel rail. Doesnt matter if there not though. Let me know what you have. Must be in good working condition. cheers.

sweet as man, yeah the t3 i had for it was fine, just ended up being oil return line kinked, i thought the oil seal went on it, but yeah rebuilding bottom end, but shit has come up in life, so planning on selling rolling shelling ready for paint, getting a r32 and chucking rb30 bottomend on it when its rebuilt, so was just passing through and spotted your thread. take it easy best of luck, peace.

Hey mate, Looking good. I sold you the turbo, how did she come up? cheers.

sure mate, will post at your expense though. drop me a pm or something and we will work it out. sold pending payment.

had a quick look before bed. cant find specs on them mate, as post says has a very small amount of shaft play and cant tell you if the seals are all good or not as i never put it on my car. The guy i got it off from repco has known me for ages and was a mechanic with my mates dad, so i dobut he would have sold me something not working. Sorry i cant be more help.

thanks mate