filo_a31

To be honest you don't want want my dash loom, it looks like it has be rewired a few times, and yea, not the best haha

fibreglass

Make an offer

My poor ceffy has copped a smack in the rear end so i am parting it out. Let me know what you need and i will do my best to make sure you get a good deal. Some cool things include autech front bar and sideskirts, genuine cefiro key, locks and ignition barrel, all pannels, glass, doors, seats etc. Just let me know what you need and i'll tell you if i have it. And even better if you want the whole thing. I also have lots of spares laying around. let me know if you would like to me to send you photos. *will update this post soon* Chris - 0414389834

ok thanks for the feedback, ive been looking at the turbo upgrade forum heaps lately but just wanted some opinions of people who know about these turbos. i think i might just bugger off the gt2530 and spend the extra doe and get the gt3076r

it's a high flowed rb25 turbo with steel compressor wheel

sorry rb25det

I currently have a hks gt2530 that needs a rebuilt, originally i wanted a garret gt3076r, but i also found a very cheap rb25 high flow turbo in good nick. Im hoping to get about 250-270 kw with supporting mods without killing my turbo. What should i do?

how much for the body kit and the condition?

hmm interesting feedback. may have to reconsider some things. either way 230kw is a big difference to the 200 my car is currently making. thanks for the info guys

awesome. Id be happy with 250-270 and i drive pretty hard, so i reckon i'll be sweet. As long as i get it tuned properly like you said

This topic has probably been covered a million times but i cant find it. Just wondering how much a power an rb25 with stock internals can handle all day every day on a safe tune? My current project is: rb25det (standard motor) 550cc injectors hks gt2530 turbo 14 psi boost apexi power fc z32 afm hks pod filter hks fmic hks 3.5 inch turbo back exhaust If there is already a write up can someone please let me know. Cheers

fiddle sticks. oh well, looks like i'll have to sell and buy new injectors

a bloke i work with told me that 2. just thought id get a few opinions first, thanks mate

depends on ur ride height, stiffness and wheel allignment. im running r33 gtr wheels which are 17x9.5, with 215/45 tyres, with stock ride height, stiff suspension, rolled guards, 2 degrees neg camber, not sure bout caster and they occasionally scrub at full lock usually wen im doing big angles with lots of speed at full lock

I currently have an rb20det running 550cc aftermarket injectors. My question is will these fit in an rb25det when i do my engine swap?

Just snapped my rear subframe in my a31 cefiro. i know that they are interchangeable with r32 gtst, so if anyone has one laying around, id much apreicate if you can let me know. Cheers

thanks guys. i think i mite try and find that sticky post because i found a cheap bride seat with s15 rails and wanted to see if i could use it before i went ahead.

I just saw in the parts thread that s13 seats can fit in a ceffy with slight modification. Seeing s13 and s15 seats bolt up the same. What kind of modification would be needed? i dont really want to start welding or drilling new holes

Okie doke. Im after a headlight relay that sits near the battery. Its a little brown box about 3x1x2 inches aprox. If anyone can tell me what car i can pull it off or how i can get one that would be muchly appreciated.

all good the dude gave me a 33 pedal. DUMBASS!!!!!!

I just bought an r32 clutch from a wrecker. According to the parts thread the r32 clutch pedal is the same as the cefiro. But when i pulled it out they both look quite different and the r32 doesnt quiet line up. Any help please? *below: Bottom of picture is r32... apparently. Notice how they are different *below: Unknown???

I saw in the sticky thread that the a31 fuel lid spring is the same as a31 cefiro. Did they mean the latch?

i have done an rb25 g/box conversion on my cefiro. i just need to wire up the neutral and reverse switch, which are in different locations to the rb20 box. can someone please tell me which is which?

I have done the rb25 box conversion to my ceffy but my crossmember only lines up with 1 bolt hole on each side. Is there a crossmember i can use that will line up all 4 bolt holes?