Hybrid905

Sorry for the double post was posting off my phone and double pressed the post button

No worries anytime. Good luck

How much do you want for your rb26 If you are planning on selling it once it's out... Yeah I know the whole 2jz in a GTR is such a degradation to it's true nature but can't pass up the opportunity to see if I can get a good buy :-)

Yeah they are Work Euroline rims but I have a feeling that that particular model are discontinued but I may be wrong Work only have a few different models in the Euroline and they only look similar to that but have a look on the work website maybe you will find something

Do u want the genuine Nissan stock parts as they will be super expensive brand new from Nissan you will have to order them in from your local Nissan dealer or you can go to a wreckers to try and find one in good nick. Also with removing the spoiler and badges it's all free if you DIY all you need is a hot air gun or hair dryer on low heat and some rags to protect your paint and a vert thing screw driver or blade to Jimmy it and the spoiler is just a simple un bolt job from the inside of your boot I believe but you will need to get plugs to plug up the holes or if you get it done by a pro they either fill it or weld it (not 100% which one) and then paint it ask your local body shop for a qoute then shop around and I'm sure they will do the badges at they can do the badges too but If it was me I would save the coin and debadge myself... Just my 2c... Hope it helps

I believe it is called a rain guard your best bet is to try grap one from a wreckers but if ur fussy and want a new one you will have to go to a Nissan dealer and order one

Yeah most likely you need an alignment as madbung has suggested

There was one going on caresale pretty banged up it was a GTR and it looked like a car had gone into the drivers side but if your just after the engine your after maybe thats one for you

Yeah mandrel bent for sure you can either go stainless or mild steel there are the obvious rust comparison between the two but sound wise i have heard that MS sounds better. also you will most likely get a header config of 6-1 as thats what most places will want to do for you. also make sure they are coated headers, usually ceramic. brand name is out of the question as no one makes them for NA skylines, at least 34's not sure about 33's but im sure its in the same boat. there are cat back systems you can get that are brand name but, with the name comes the dollars. The varex is a bit of a mixed opinion. some people think its great some hate it and shake there head when they see it. but as for quietening the NA, as you dont have the turbo to muffle your exhaust sound, the varex seems to do well with quieting things especially when you are close by to the boys in ss's and xr'6s :-) and its meant to give a good sound when open try searching for a you tube vid there use to be one around. as for the piping yes 2.5 inch is the way to go. some ppl say 2 3/4 but you still need that back pressure in the NA so no point going any bigger than 2.5. and finally the cat. you want to find a high flowing ceramic cat. hope it helps

Or you can always drop a rb26 in it :-)

sorry just realised your in melbourne just contact charles or search in cosmetic section for carbon vinyl wrap

those are your B pillers and yeah there are a few things you can do but sorry to say none of them involve a body shop and the reason is because its just way too easy to just do your self :-) anyway the things you can do are 1) buy the nismo b pillar garnish. though im not sure if they do 4 door. or you can look for another brand of b pillar garnishes on ebay 2) buy some 3m Di-Noc which is like a carbon look textured vinyl that you can put on yourself. (its pretty easy) you can either google for it or you can buy some from either charles on this forum (melbourne) or myself (sydney) 3) if your in sydney i can supply and install for you just PM me. if you buy yourself and need help i can give you some instructions

Hey mate hate to be negative but a word of warning when buying from carmate ad I'm sure a lot of people on hear agree is that a lot of things don't fit or are of poor quality and the service can be so so but if u are going to get it make sure they test fit it to your car before you hand over any cash. Just a friendly word of advice

Just got mine done with Greg he did an awesome job and isna great guy also matt the legal tint in nsw is 35% I believe

Hey phill count me in for the next buy please

Yeah the black with polished lip for sure with nismo sticker and it will be pure awesome :-)

Yeah second for wheel balance that is most likely thing

There are three things that it could be the first is the fuse which should be in the footwell on the drivers side if both mirrors are dead this is the most likely cause if only one is the it is the mirror motor. The last but other unlikey cause is the switch in ur door but I doubt this very much anyway hope this helps

It's red and auto that's enough to deter me sorry

Get glassylite it's the best stuff it comes with a uv protectent which stops the yellowing again

hey paul, i can put together an order just pm me with the parts and you the area you need to get them shipped to and i can put together a quote for you.

hey mate i dont believe you can buy it as a separate item it comes part of a set with the front bar

Hey mate am Sydney based and also with the yen being not so good it is a bad idea to buy at this time if you want to order anything let me know if anyone would like to order any east bear parts atm please pm me with the part and where you are from so I can get a Quote for you asap

Yeah carmate bad lol never fits and also with the power steering check you fluid and also maybe ur pump and bodyform are awesome go with them

yes is the spoiler still for sale