Aaron BNR32 GTS-T

na they dont fit

Looking for a cat back exhaust for my R32 (second hand is fine but in good condition) i dont realy want to go a cannon but if someone has a cheap good one i may consider but id like stainless steel. i have a sililar looking set up like the photo below and id like the same looking thing, just blew mine up so maby a cannon as a cheap option while i either fix mine or just keep a cannon on permanently must be legal and not too loud! just want the nice RB burble looking to spend around 300 to 400 pm me please about it and with pics too cheers

PM SENT!

i looked on google and couldnt find anything can you post the links?

yeah but you dont get the pressure signal from the ecu

they wont work cause they receve the signal from the engine ecu with the wires i already know and process the infomation in the avcr unit and then send the info to the pressure sensor and control valve to open the wastegate via the colourd wires i dont know hence me needing to know http://www.apexi-usa.com/content/pdf6115.pdf

that wont work cause their difftent. the other wires left over on the master unit are for the pressure sensor and the control valve

BUT I NEED TO KNOW THE COLOURS FROM THE AVCR UNIT TO JOIN THE PINK BLACK AND WHITE WIRES FROM THE SENSOR AND CONTROL VALVE TO!

yeah i get that just need to know which colours to join the boost solenoid and boost sensor to from the avcr master!

yeah what dose the filter do? do you know where to get one? i know it wont be hard to match the wires but i need to know which one goes where lol as you can see in the pic i got the unit and pressure sensor and boost control valve so just need to join everything up

ow and is the little air filter important for the pressure sensor? i dont have one anyone know where i can find one?

yeah i dont know which ones go where though... i just need to see if anyone knows which colour goes to which one cause i dont want to stuff it up lol so if anyone has one that they can look at and see what plugs go where and the colours they match up with that be great. as for the ecu positions i have that already i got it off the pdf

thrust bearing in the clutch is making that chirping noise mine went in my 32 and i still havnt fixxed it but it wines more that chirps but only when the clutch is out

i got an apexi avcr boost controller (second hand) and it didnt come with a loom so going to make one up so just wondering if anyone can help me out by telling me which wires go where i know the: red-ignition power purple-RPM.injector signal green-ground black-ground gray-throttle signal white-speed signal as per the apexi wiring pdf on the net but i need to know which wires go to the boost control valve (pink and black wires) and the pressure sensor (pink, white and black wires) thats the: yellow wire pink wire blue wire brown wire orange wire pics below so if anyone can help me out and let me know which one goes where that be great cheers ow and if ive posted in the wrong spot could mods please move thanks

interested in the front bar where abouts are you? and what things may you be interested in swapping? let me know

i got done by lidar 123 in a 100 zone only booked me for 10 though

where abouts are you?

just a few shots of my car

had troble with and accident at then end of last year and wasnt my fault had a guy change over 3 lanes to the left with his right indicator on... best thing to do is send an illustration of the incident and everything to your insurer and theirs and photos etc that cleared my name from being 'my fault' as the other driver stated and i sold my car at a loss and bought another

shit that sucks to see it like that! i know the feeling of your car getting attacked... well in my case kicked. i was in Canberra after a night out i was leaving the car park and this islander kicked my rear passengers side of my 32. i stopped and then 2 came over and opened my door and started kicking me and punching me in the face. i couldn't do much but all an unprovoked attack and no cctv footage but now i got to get the side of my car resprayed

yeah man standard ecu i havnt put any of the parts on yet just getting everything and then puting it all on to save continous dynoing ow and fogot to add external wastegate

looking at modding my rb20 atm running stock injectors and turbo etc just a front mount and 3" turbo back with highflow cat but looking to keep that but upgrade to a t04e turbo and rb25 injectors and a red top intake cam (i have a silvertop) and 12-14psi i was wondering about AFM and weather i need one i.e. z32, rb25 one or if i dont? and what are the advantages of it? help would be good cheers

pm sent!!!!! pm me back

hey just wondering if anyone is familiar with this mod. i got a redtop inlet cam that im going to put into my rb20det silver top. can anyone enlighten me in what things i need to do? the specs i have found are: RB20DET Red top Camshaft duration 248°inlet, lift 7.8mm inlet, 240°exhaust, lift 7.8mm exhaust RB20DET Silver Top Camshaft duration 240°inlet, lift 7.3mm inlet (also found it said it had 7.8mm lintake lift somewhere), 240°exhaust, lift 7.8mm exhaust i know the RPM at which peak horsepower occurs is typically increased as duration increases at the expense of lower rpm efficiency (torque) can someone please confirm these are correct and what i have to do e.g. adjustable cam gears to get the overlap right etc. i am going to get the car tuned and dyno'd when i get all my things together for the performance side of things cheers for the help

looking for a set of seat rails for some bucket seats i got lying around at home stock ones or after market ones but ADR compliant if possible if i do modify them anyone know what i have to do to get the piggies off my back? cheers aaron