huddy

yes i did! - didnt realise konect is in SA... post up how u go.

this might be good for a cefiroz write up

good luck with it all hope it all goes smooth

hey mate if its stock rear bumper, you do not need to remove the rear taillights. ok the bolts listed: - OUTSIDE UNDERNEATH - 3 or 4 Left AND Right (so connecting to wheelarch and rear 1/4) - INSIDE - 3 running along the inside of the 1/4 panel Left AND Right sides - INSIDE - 4 BIG BOLTS to metal rear support bar (on right hand side you will need to unscrew metal cover that covers wiring to fuel tank/pump thing) - OUTSIDE REAR - 1 bolt from number plate bracket to bumper once all this is done, you should be able to slide the bumper out, but dont do it too much yet. you will need to - unscrew numberplate lights (2screws on each) and also disconnect. this should remove this whole assembly... ... NOW - you should be able to remove the bumper from the metal support - REFIT the metal support ( 4 BIG metal BOLTS ) and your after market bumper should sit ontop of it nicely and screw into 2 or 3 points at the rear of the wheel arch anymore questions post up of pm me how do i know this? - did it last week when borrowing a rear bumper off another stock ceff... had to remove and refit.

i made some calls on this and i was told by a workshop who's been around for a while importing parts etc... that the main difference between the a31 / r32 rb20dets was the turbo's (r32 better) and something else i cant remember lol. but he did say that the coilpacks and computers 'should' all be interchangable and has never had a problem with this in all his years. -Matt

oohh crap.... i might be needing to swap my motor aswell and got a rb20det lined up... man if i need it i HOPE it fits... is there anyway of checking if its the same type? like what jaik said with the coilpacks the same or not? NEED TO KNOW THIS BEFORE FRIDAY!!! cheers. -Matt

will post up in the next couple of weeks, just in the process of trying to get it running at the moment, then i'll get this baby fitted up.

i have a hybrid gtst kit NOW, just waiting to try fit it up... will post up if it bolts straight up.

i've got no idea, but i dont think they will.... why not just paint the ones that are no there to make them look 'pretty'

and you have a reply

i bought HSD ones suit s13, quite happy with them

it was just a spray on tint... it cleaned off.. but obviously not normal black tint...obviously pink tint...lol

^^^that pic is when we first got the car straight off the boat... LOOKS tuff, but not practical...lol... and its just a pink neon behind the grill...

here's a whole car shot...

Selling the Cefiro Bodykit of our ceffy, unsure of what type it is.... but the pics will show you anyway... Good Condition, drivers side skirt has crack, but easily repairable when to be painted includes front bar, side skirts and rear bar asking $550 Preferrably SA!!!! thanks Matt

ok thanks, i'm thinking the best thing for me to do is buy a centre and housing... most likely r200 and simply see if it fits... if it doesnt, change the half shafts... thanks.

^^^ haha ... MEGGALA - was it a 5bolt? and did it have ABS? i guess i will have to try bolt up another one soon... if i can find one

just as i thought... THANKS!

i know i'm constantly asking questions... but here's another one... ok is there a step by step guide to pulling off the rocker cover on a rb20det, as i want to paint the one which is currently in the car... i mean if i undo all the necessary bolts, will i have to be careful not to bump/move/accidently adjust anything, or is it as simply as undo bolts.... pull it off... put it back on.... thanks.

ok i've found that i've got 5bolts to the driveshafts, so i'm assuming this is not r200, also it has ABS, so i've been told if i want to fit a r200 housing (with 5bolt to driveshafts) i'm going to need to swap the end of the tailshaft aswell???

the KAI version.... oh man.... there's different ones aswell???? i just ordered a HKS gt25/30 including dump pipe and oil/water lines... so hopefully its a good one... HAHA

this diff i have has 5 bolts connecting up to the driveshafts.... if this helps... HELP!

thanks guys... i've ordered a 2530...

emailed kansai... but didnt know the container was arriving this week... i knew terry was in japan loading up a container... will call them tomorrow if its christian, sik christian you're talkin about i'll give him a buzz tomorrow aswell .... cheers guys

i took pictures of it if that'll help? coz i'm still unsure?