Jump to content
SAU Community

Petrol Information

NaStY_r33gtst

By NaStY_r33gtst,
in General Maintenance

 Share

Recommended Posts

NaStY_r33gtst Apprentice

NaStY_r33gtst

Posted
Posted

G'day fellows, umm i was told that skyline turbo engines needed to be runing at least of 95 octane petrol miniuim, however i've been putting just premium petrol and sometimes unleaded petrol, would anyone knows if thats alright or bad? Also what are the future consequences when leading with premium petrol what will the results be?

thanks guys

Link to comment
https://www.sau.com.au/forums/topic/101110-petrol-information/
Share on other sites
RANDY Veteran

RANDY

Posted
Posted

The timing is probably set up for 100ron fuel, being an import. As far as I know, you may get excessive ping from the motor if your ECU hasn't relearnt the different fuel. There are guides here on how to reset your ECU, but if you plan on using lower-ron fuel permanently, it'd be worth getting a tuner to adjust the timing based on how much knock you are getting.

Otherwise, if you want better power and less pinging, use 98 ron. =-]

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Latest Posts

    • Duncan
      After market rear camber arm adjustment

      By Duncan · Posted

      Then, shorten them by 1cm, drop the car back down and have a visual look (or even better, use a spirit level across the wheel to see if you have less camber than before. You still want something like 1.5 for road use. Alternatively, if you have adjustable rear ride height (I assume you do if you have extreme camber wear), raise the suspension back to standard height until you can get it all aligned properly. Finally, keep in mind that wear on the inside of the tyre can be for incorrect toe, not just camber
    • V35Newbie
      After market rear camber arm adjustment

      By V35Newbie · Posted

      I know I have to get a wheel alignment but until then I just need to bring the rear tyres in a bit they're wearing to the belt on the inside and brand new on the outside edge. I did shorten the arms a bit but got it wrong now after a few klms the Slip and VDC lights come on. I'd just like to get it to a point where I can drive for another week or two before getting an alignment. I've had to pay a lot of other stuff recently so doing it myself is my only option 
    • Duncan
      After market rear camber arm adjustment

      By Duncan · Posted

      You just need a wheel alignment after, so just set them to the same as current and drive to the shop. As there are 2 upper links it may also be worth adding adjustable upper front links at the same time; these reduce bump steer when you move the camber (note that setting those correctly takes a lot longer as you have to recheck the camber at each length of the toe arm, through a range of movement, so you could just ignore that unless the handling becomes unpredictable)
    • V35Newbie
      After market rear camber arm adjustment

      By V35Newbie · Posted

      I got adjustable after market rear camber arm to replace the stock one's because got sick of having to buy new rear tyres every few months. Can anyone please let me know what the best adjustment length would be. I don't have the old ones anymore to get measurements. I'm guessing the stock measurement minus a few mm would do it. Please any help on replacing them would be fantastic I've watched the YouTube clips but no-one talks about how long to set the camber arm to.
    • GTSBoy
      Unpeeling the Orange

      By GTSBoy · Posted

      Heh. I copied the link to the video direct, instead of the thread I mentioned. But the video is the main value content anyway. Otherwise, yes, in Europe, surely you'd be expected to buy local. Being whichever flavour of Michelin, Continental or Pirelli suits your usage model.
×
×
  • Create New...