Jump to content
SAU Community

Recommended Posts

Hey Guys,

This week while driving i was on the highway and the car was running fine i then took an exit and was going doing 60 down a local road and my car started misfiring and carrying on so i went to pull over and the car stalled. I then waited a minute got the car to start and got it home with it misfiring and acting like it wanted to stall the hole time. Once i got it home it sat for around 20 minutes and then i started it and held it at a rev as it was still playing up and it seemed to stop whatever it was doing and drove fine however on and off of most trips ive done this week it has continued to have these mifiring spells and then when i seem to wait around 5 minutes the car runs perfect again!?

Has anyone experienced this i cant figure out whats causing it other then the thought of a faulty wire in my harness.

Regards,

Dan

Could be something clogged in the fuel system? Run a bottle of fuel treatment like injector cleaning stuff, and maybe take the coilpack cover off and see how that goes?

Stalling and idling like that usually means (if everything else is ok) some sort of vacuum leak. Check all your piping, it's possible that one of them is cracked or something, and with heat, it expands.

Hey man these people are only trying to give you some ideas to what could be wrong, any mechanic would only suggest the same without actually looking at the car and seeing what its doing and etc etc. to me what they have said sounds like a start and if none of these is the cause then at least you know what its not.

I had the same problem and still do ATM but car is off the road now. I knew i had a dodgy Fuel Pump cos it was running lean, and then all this started to happen, So i now have a new/bigger fuel pump and also a Z32 AFM being installed this week which should sort the problems out. I have also heard that the pipeing could also be a issue, but i'd start with the fuel pump if i was you!

Ive got a 500hp fuel pump that i havnt installed yet i guess its time to make the change and find out. Although i was talking to a guy at work who got fuel at a caltex same as me just last week aswell and ended up dieing half way down the road. He got towed and they emptied his tank and found that there was 20litres of water in the 50 litres he had purchased. So im wondering if i to got a batch of this shit fuel.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Latest Posts

    • 3 Kids are starting to hit that ages. I wanted to get them something special to learn on, put down the screens and have some fun. 4Door 2001 R34DE Black Pearl GV1 Jap Import, AU 2nd owner. Pre Work done. Suspension - Wheels Pedders SportsRyder Coilovers   Wheels TSG Spokey Boi 18'x9.5"+15 Body JASI Aero 4 door Type R Full Kit LED Conversion - Parker, Blinkers, & Reverse Exhaust Hurricane Headers 100 CPI high flow cat 2.5" Piping Cannon muffler Internal Bride low max stradia ii - front seats  Bride RO seat base and Rails (R/H) Cube short shifter LED Conversion - Interior   
    • Why are you so adamant on going M12? Why not follow Brad (GTSBoy) suggestion. You're talking moving from a 1/8" size, to a 1/2" effectively. 4 times bigger. Why skip the commonly available sizes in between? The bigger you go, the more likely you are to strip the threads out at a later date, as guaranteed, someone will put a huge spanner on the M12 and really tighten it up, and you're only in thin wall, so not a lot of threads to engage!
    • Hi. Yeah thanks. Car is already at tuners and it staying there to resolve "many" issues they do not like. So it is in a good hands. Getting a good tune on that Nistune ECU too so the car would be good. Just needs a little tune up and love.
    • Probably gonna remove manifold and turbo. I’m not sure if I can get M12 x 1.5 air tight. Could use high temp Loctite 246 or something similar, but I don’t know. Maybe it’s just best to remove everything again and weld an 1/8NPT on there instead.
    • Yeah, saw the ratios, not impressed. Would like the punch I have in the first gears now. With those ratios it won't be the same.  Also want the h pattern gearing, or at least a quiet gear set that don't need to come apart for service each year. Looks like the only "reasonable" way Is a 8hp70 transmission, but where is the fun in that🤷‍♂️
×
×
  • Create New...