Jump to content
SAU Community

Recommended Posts

Yesterday i decided it would be a good idea to wash my car thoroughly as i haven't done it in a while. Had the idea to wash out my engine bay which was looking pretty grimy. Sprayed some degreaser on the engine cover (over the spark plugs) then gave it a quick squirt with the hose to wash it off (not realising that it is actually not waterproof at all).

Spent today with it running on 4 and 5 cylinders (didn't start playing up till i got far enough from work that i couldn't drop it home and drive the other car) and 2 hours tonight with a hairdryer drying it out...

My question is does anyone have a way they use to wash the engine bay without getting water in there???

Cheers

Link to comment
https://www.sau.com.au/forums/topic/102074-why-im-an-idiot/
Share on other sites

Yesterday i decided it would be a good idea to wash my car thoroughly as i haven't done it in a while. Had the idea to wash out my engine bay which was looking pretty grimy. Sprayed some degreaser on the engine cover (over the spark plugs) then gave it a quick squirt with the hose to wash it off (not realising that it is actually not waterproof at all).

Spent today with it running on 4 and 5 cylinders (didn't start playing up till i got far enough from work that i couldn't drop it home and drive the other car) and 2 hours tonight with a hairdryer drying it out...

My question is does anyone have a way they use to wash the engine bay without getting water in there???

Cheers

lol... I did this, well it wasnt me it was a friend helping me clean the engine bay for the Show & Shine, didnt manage to go :P.

I dont clean my engine bay.

I think drying it with hair drier could be bad? Use a clean lint free cloth and stick it in the coilpack hole and get the water out.!

Link to comment
https://www.sau.com.au/forums/topic/102074-why-im-an-idiot/#findComment-1871497
Share on other sites

lol

Kinda makes you wonder why the bonnet is there.. and the water run off gutters..

Try dry everything i guess.. you don't want any moisture near electrical wires etc.. take it to a mechanic..

dont take it to the mechanic, like d00dz said, take the coil packs out and just dry them off, put them back in and she'll work just fine :P .. dont the same thing too. had 3 drops of water on a coil pack which caused it to miss

Link to comment
https://www.sau.com.au/forums/topic/102074-why-im-an-idiot/#findComment-1871568
Share on other sites

dont take it to the mechanic, like d00dz said, take the coil packs out and just dry them off, put them back in and she'll work just fine :P .. dont the same thing too. had 3 drops of water on a coil pack which caused it to miss

Well.. i mean if he's having "serious" problems take it to a mechanic.. unless you know alot about your car..

Link to comment
https://www.sau.com.au/forums/topic/102074-why-im-an-idiot/#findComment-1871765
Share on other sites

hahahah nah its all good, i was careful with the dryer and didn't let the coils or wires get too hot or anything and today no miss. Just a huge waste of time. I won't be doing that again, i think silver gtst's idea is a good one.

I used to do it with my vl and it wasn't that bad cause the water could evaporate more easily (no cover). Lesson learnt

Link to comment
https://www.sau.com.au/forums/topic/102074-why-im-an-idiot/#findComment-1872456
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Hi. Sry iam not a mechanic and iam not at the car atm so i dont know 100% but they told they measure those and even try to change those. AFM they have two. Coils are new a they have my old one too. Plugs too. ECU...we have 25 NEO stock and Nistune 25 NEO.   But i dont know if any one those could be the problem and why/if/what can cause this, Only thing they did not check is fuel...but that walbro 255 is new(like 1,5 years)... That fuel pressure gauge idk...but i let them know Any suggestions?   EDIT: how can they know if it is like you say he ECU pull power when it reaches a specific boost level that is too high? Tha car has boost controler
    • Can you clarify what you mean by boost cut, do you mean it misfires both when under load (driving) and when stationary and out of gear? Or does the ECU pull power when it reaches a specific boost level that is too high (boost control issue)? Does it occur at idle with no throttle? When you say "the ECU is OK", what ECU is it and why do you think it is OK? Have you used the NEO ECU, and if so do you have a MAP sensor attached? Same for the AFM, why do you think it is OK? Do you have any way to put a fuel pressure gauge on it (even just a mechanical one between the fuel filter and fuel rail)?
    • Hi.. Just another problem. So maybe you can help. I(my mechanic) done swap from my RB20DE NEO to RB25DET NEO. Everything is OK but we have a boost cut. Coils/Plugs are ok...AFM is ok. ECU is ok. I have Walbro 255 but it "changed" sound few months ago(you can hear it ouside) you did not hear that when it was new(maybe faulty?) Sooo...what now? What can cause this boost cut? It is even when you standing still...
×
×
  • Create New...