Jump to content
SAU Community

Jdm Concept - Your Work Cr-kai Wheels Preorder ***

JDM Concept

By JDM Concept,
in For Sale (Business Traders)

 Share

Recommended Posts

JDM Concept Mentor

JDM Concept

Posted
Posted

SIGNATURE.jpg

main_cr_logo.gif

emotion_mgm.gifemotion_mhg.gif

EMTWHT.jpg

CLOSING DATE OF PRE-ORDER: SAT 4 FEB 06

TO ARRIVE: ABT 8 WEEKS AFTER THE PRE-ORDER CLOSED

DEPOSIT PER SET = $500.00, INVOICE WILL BE ISSUED FOR THE DEPOSIT.

DELIVERY: FREE IF DEPOSIT IS RECEIVED BEFORE 31 JAN 06, OTHERWISE IT WILL BE BASED ON WHERE YOU LIVED, UP FROM $95.00 TO $150.00

PAYMENT METHOD: DIRECT DEPOSIT TO THE A/C BELOW

accountdetails.jpg

NOW OPEN, WORK CR-KAI WHEELS PREORDER BY JDM CONCEPT

WORK CR-KAI IS A ONE PIECE LIGHTWEIGHT SPECIAL CAST WHEELS (SEMI-FORGING). GENEROUSLY LIGHTER AND STRONGER THAN OTHER CAST WHEELS.

AS OFFICIAL DEALER OF WORK WHEELS FOR AUSTRALIA, WE GUARANTEE EACH OF OUR RIMS TO BE A GENUINE PRODUCT AND HAVE FULL WARRANTY TO BE FREE FROM DEFECT.

WE CAN FORWARD A COPY OF OUR CERTIFICATE OF DEALERSHIP UPON REQUEST.

***** HAVE A LOOK AT OUR FEEDBACK ON NISSAN SILVIA AND JUDGE FOR YOURSELF *****

THE PRICES OF WORK WHEELS HAS INCREASED THIS YEAR BY ABOUT $50.00 PER RIM DUE TO THE COST OF INCREASE IN METAL PRICES.

HOWEVER, WE HAVE DECIDED TO KEEP THE OLD PRICE SO THAT THE RIMS CONTINUE TO BE AFFORDABLE TO ALL ENTHUSIASTS. THAT IS A MASSIVE $200.00 SAVINGS ALREADY!!!

NOT ONLY THAT, PUT A DEPOSIT FOR THE RIMS BEFORE 31 JAN 06 AND YOU WILL RECEIVE FREE DELIVERY FOR THE RIMS TO THE VALUE UP TO $150.00.

BELOW ARE THE BREAKDOWN OF THE PRICES OF THE WHEELS, EACH AND PER SET. THIS WILL HELP THOSE WHO NEED A STAGGERED SET OF WHEELS.

AVAILABLE IN BRONZE, GUNMETAL AND WHITE (EXTRA 3 WEEKS TO MAKE)

THE OFFSET AND PCD (I.E 4 STUDS, 5 STUDS) IS YOUR CHOICE, WE CAN REQUEST WORK TO CUSTOM MADE FOR YOU. WE HAVE DONE IT BEFORE!

15 x 5.5JJ, WAS: $399.75, NOW: $349.75

15 x 7.0JJ, WAS: $424.75, NOW: $374.75

16 x 7.0JJ, WAS: $462.50, NOW: $412.50

17 x 7.0JJ, WAS: $499.75, NOW: $449.75

17 x 8.0JJ, WAS: $524.75, NOW: $474.75

17 x 9.0JJ, WAS: $537.50, NOW: $487.50

18 x 7.5JJ, WAS: $562.50, NOW: $512.50

18 x 8.5JJ, WAS: $587.50, NOW: $537.50

18 x 9.5JJ, WAS: $612.50, NOW: $562.50

OR

15 x 5.5JJ - WAS: $1,599.00 /SET, NOW: $1,399.00 /SET

15 x 7.0JJ - WAS: $1,699.00 /SET, NOW: $1,499.00 /SET

16 x 7.0JJ - WAS: $1,850.00 /SET, NOW: $1,650.00 /SET

17 x 7.0JJ - WAS: $1,999.00 /SET, NOW: $1,799.00 /SET

17 x 8.0JJ - WAS: $2,099.00 /SET, NOW: $1,899.00 /SET

17 x 9.0JJ - WAS: $2,150.00 /SET, NOW: $1,950.00 /SET

18 x 7.5JJ - WAS: $2,250.00 /SET, NOW: $2,050.00 /SET

18 x 8.5JJ - WAS: $2,350.00 /SET, NOW: $2,150.00 /SET

18 x 9.5JJ - WAS: $2,450.00 /SET, NOW: $2,250.00 /SET

WEIGHT ON EACH RIM (ESTIMATE)

15 X 5.5JJ +40, 4X100 - 6.0KG

15 X 7.0JJ +44, 4X100 - 6.7KG

16 X 7.0JJ +44, 5X100 - 6.6KG

17 X 7.0JJ +47, 5X114.3 - 8.6KG

17 X 7.0JJ +32, 5X114.3 - 8.9KG

17 X 8.0JJ +42, 5X114.3 - 9.4KG

17 X 8.0JJ +32, 5X114.3 - 9.6KG

17 X 8.0JJ +47, 5X114.3 - 9.2KG

17 X 9.0JJ +28, 5X114.3 - 9.4KG

17 X 9.0JJ +17, 5X114.3 - 9.6KG

17 X 9.0JJ +44, 5X114.3 - 9.0KG

18 X 7.5JJ +48, 5X114.3 - 10.0KG

18 X 8.5JJ +43, 5X114.3 - 10.6KG

18 X 8.5JJ +38, 5X114.3 - 10.4KG

18 X 8.5(MT)JJ +38, 5X114.3 - 10.48KG

18 X 8.5(ST)JJ +37, 5X114.3 - 10.65KG

18 X 9.5JJ +20, 5X114.3 - 11.3KG

18 X 9.5JJ +38, 5X114.3 - 11.3KG

AT THE MOMENT, WE DO NOT HAVE ANY OTHER PREORDER FOR OTHER TYPE OF WORK WHEELS YET. WE WANT TO APOLOGISE FOR THAT.

GALLERY

ONE OF OUR LAST YEAR SHIPMENTS

050605.jpg

BRONZE COLOR

w1.jpg

GUN-METAL COLOR

CIMG0694.jpg

WHITE COLOR

DSC07614.jpg

cr14.jpg

lude2.jpg

works15.jpg

workr34.jpg

funkymonkey Grand Master

funkymonkey

Posted
Posted

can you source custom offset wheels in 10.5J and 11J. If not, can you get the inner and outer parts of Work Equips (its a 3 piece rim) in custom sizes?

Cheers,

Shan

JDM Concept Mentor

JDM Concept

Posted
  • Author
Posted
can you source custom offset wheels in 10.5J and 11J. If not, can you get the inner and outer parts of Work Equips (its a 3 piece rim) in custom sizes?

Cheers,

Shan

i will check with work about it :)

JDM Concept Mentor

JDM Concept

Posted
  • Author
Posted
can you source custom offset wheels in 10.5J and 11J. If not, can you get the inner and outer parts of Work Equips (its a 3 piece rim) in custom sizes?

Cheers,

Shan

hi mate, work cr kai doesnt have 10.5J or 11J, there are some other type that do have. it is best to email at [email protected] cos it seems to be a long discussion

leo

JDM Concept Mentor

JDM Concept

Posted
  • Author
Posted
no worries, sending email now. Thanks for the prompt reply too.

i didnt received ur email, could u resend it again.

thanks :(

Majanal- PM replied. sorry abt it :P

Guest
This topic is now closed to further replies.
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • GTSBoy
      boost source Size Garrett gt28 gen2

      By GTSBoy · Posted

      Totally equivalent. Stock often goes from the comp cover because that's where the actuator is also installed and the factory needs 2" of hose to make the connection - and it comes as a pre-assembled unit. They totally have a boost reference from somewhere between the turbo and the throttle(s). Oh, jeez. Just do it in M12 then. We don't actually care that much. I would expect any such AN converter fitting to rely on an o-ring or some other seal onto a flat surface under the flange of the hex**, because bolt threads are no intended to provide a pressure seal. unlike..... pipe threads. **which also requires a suitably flat and smooth surface on the turbo's boss to provide the seal.
    • timmy94
      boost source Size Garrett gt28 gen2

      By timmy94 · Posted

      I also used NP   That’s were it’s seems to be the best place to fit it? All schematic shows also that it’s should be referenced from the turbo housing. But idk, I do see high hp cars without any connection or anything to their turbos, so I really don’t know how they connect their things
    • timmy94
      boost source Size Garrett gt28 gen2

      By timmy94 · Posted

      I do have loctite 243 and 246 and a few more models. I could drill it now in place and make new threads for m12 and order an4 - m12 coupling and fit that to the turbo. Run a braided hose to the EBC which I could get a an4 to 1/8npt 
    • timmy94
      boost source Size Garrett gt28 gen2

      By timmy94 · Posted

      So M12 and sealant should be fine?    NPT ” because that’s what I had and what I could get atm. 
    • r32-25t
      R32 gtr transmission strength, billet plate

      By r32-25t · Posted

      Wouldn’t touch par if they gave it to me. You need to ask how much power you’re looking to make and then add about 50% to it because that’s what you’ll end up making  The factory box says no more at about 350kw or so, the upgraded synchro boxes won’t handle much over 500kw for long and at that point you’re looking at an auto or dog engagement manual,  once you’ve gone dog engagement you may as well go sequential, they cost a little bit more but it’s worth it  also while you’re at it you should upgrade the transfer case with 10 friction plates 
×
×
  • Create New...