Jump to content
SAU Community

Recommended Posts

Hi All,

With all the interest shown and PM's received from SAU members, the guys from Platinum Performance Parts and Imports have offered to continue their sale on intercoolers for all SAU members. I have attached photos from one of our members installs, as well as the hybrid brochure.

Group buy start date: 07/02/06

Group buy end date: 31/03/06

Location:[/b] 17/287 Victoria Road, Rydalmere 2116. Sydney, NSW.

What you get: All R32, R33 and R34 Kits are the same price.

All kits come with Silicon hoses, new hybrid designed heavy duty clamps,

chrome piping and instructions and all bracketing needed. All comes brand

new in wrapping and boxes.

Price: For Intercooler and piping $680

For Intercooler and piping + Installation $880

Website: http://www.platinumppi.com/

Bookings: Call Daniel on 0411101737 and mention you are calling about the SAU group buy, he will organise a date and time for install.

Edited by RYD11R
Link to comment
https://www.sau.com.au/forums/topic/104825-r32-r33-r34-hybrid-gt-coolers/
Share on other sites

Finally its in...... Daniel did an excellent job, no issues, big difference in response and power........ I LOVE IT.......

Recomend to all other owners interested in a very, very nice upgrade...... my pics attached

post-18508-1139791632.jpg

post-18508-1139791675.jpg

post-18508-1139791699.jpg

post-18508-1139791729.jpg

Hi bro,

Do you install s15 aswell and if you do, how much will it cost?

Hey man,

I personally don't install the systems, but call Daniel and he will beat any price u can find.

All kits come with Silicon hoses, new hybrid designed heavy duty clamps,

chrome piping and instructions and all bracketing needed. All comes brand

new in wrapping and boxes.

Edited by RYD11R
  • 3 weeks later...
Hey guys i believe the pipes are light weight aluminum and coated in a chrome finish just for your information.

And yes S15 kits available they are $930 installed as this takes quite a bit longer to install

Thanks for that man.....

hey i was just wondering if i buy the cooler now but get it installed later will it still cost around the same. reason being car is not ready yet but dont want to miss out on this wonderful group buy.

cheers,

dom

Guest
This topic is now closed to further replies.


  • Similar Content

  • Latest Posts

    • What are we supposed to be seeing in the photo of the steering angle sensor? The outer housing doesn't turn, right? All the action is on the inside. The real test here is whether or not your car has had the steering put back together by a butcher. When the steering is centred (and we're not caring about the wheel too much here, we're talking about the front wheels, parallel, facing front) then you should have an absolutely even number of turns from centre to left lock and centre to right lock. If there is any difference at all then perhaps the thing has been put back together wrongly, either the steering wheel put on one spline (or more!) off, and the alignment bodged to straighteb the wheel, or the opposite where something silly was done underneath and the wheel put back on crooked to compensate. Nut there isn't actually much evidence that you have such a problem anyway. It is something you can easily measure and test for to find out though. My money is still on the HICAS CU not driving the PS solenoid with the proper PWM signal required to lighten the load at lower speed. If it were me, I would be putting either a multimeter or oscilloscope onto the solenoid terminals and taking it for a drive, looking for the voltage to change. The PWM signal is 0v, 12V, 0V, 12v with ...obviously...modulated pulse width. You should see that as an average voltage somewhere between 0V and 12V, and it should vary with speed. An handheld oscilloscope would be the better tool for this, because they are definitely good enough but there's no telling if any cheap shit multimeter that people have lying around are good enough. You can also directly interfere with the solenoid. If you wire up a little voltage divider with variable resistor on it, and hook the PS solenoid direct to 12V through that, you can manually adjust the voltage to the solenoid and you should be able to make it go ligheter and heavier. If you cannot, then the problem is either the solenoid itself dead, or your description of the steering being "tight" (which I have just been assuming you mean "heavy") could be that you have a mechanical problem in the steering and there is heaps of resistance to movement.
    • Little update  I have shimmed the solenoid on the rack today following Keep it Reets video on YouTube. However my steering is still tight. I have this showing on Nisscan, my steering angle sensor was the closest to 0 degrees (I could get it to 0 degrees by small little tweaks, but the angle was way off centre? I can't figure this out for the life of me. I get no faults through Nisscan. 
    • The BES920 is like the Toyota Camrys of coffee machines. E61 group head is cool, however the time requirements for home use makes it less desirable. The Toyota Camry coffee machine runs twin boilers and also PID temp control, some say it produces coffees as good as an E61 group head machine.
    • And yes with a full tank it will hit limiter free revving or driving 6B6CDF6E-4094-426D-A9CB-6C553475FE36.mp4
    • One way of putting the fuel surge idea to rest, is that even when in neutral/clutch in or free revving it still has the same issue, it can’t even get to limiter (7800) so to me that says it can’t be g force, I’m not trying to argue I just want to find the f&$king issue 😡
×
×
  • Create New...