Jump to content
SAU Community

Recommended Posts

Hi Everyone,

ENDS 31ST MARCH 2006, BE QUICK!

We are having an ENDLESS Brake Pad SALE!!

To suit MOST japanese cars. Check here.

Prices below are for a set of front OR rear Endless Brake Pads. Prices include GST AND shipping (Australia Only).

NON ASBESTOS (Type/Purpose/Price)

NA-M - High performance/dust-free Sports $360More Info

NA-R - Circuit racing suited for Semi/Full Slicks $360 More Info

SEMI METALIC (Type/Purpose/Price)

MA-11 - Circuit racing suited for Semi/Full Slicks $360 More Info

MA-22B - Circuit racing suited for Semi/Full Slicks $400 More Info

SSM - High performance/dust-free Sports $360 More Info

We Also have

NA-Y - High Performance Agreesive Street $210 More Info

NA-S - High Performance Agreesive Sports $250 More Info

SSS - High Performance Agreesive Sports $255 More Info

SSY - High Performance Agreesive Street $210 More Info

Enquiries

Please email us on [email protected]

Place an Order

1) Register on http://www.autospeedbits.com.au

2) Add the items you want to your cart and proceed to checkout

3) Add "SAU Special" and Car Make/Model/Year in the Special Notes and we will adjust the price and check the availability for your car.

4) Full Payment is required and we only support Direct Debit at the moment

5) Delivery in approx 5 working days

Sorry No Pickup Available

Link to comment
https://www.sau.com.au/forums/topic/104993-endless-brake-pads-sale/
Share on other sites

  • 1 month later...
May be more for street use!!

Hi Tomnix,

If you use majority of your car for street then I suggest SSY (0-380 °C) or NA-Y (50-350 °C), majority for track then maybe NA-M (100-480 °C) or NA-S (70-450 °C)

I hope this helps but don’t take my word as gospel as everyone tends to have their own opinions.

Cheers

Andrew

  • 3 weeks later...
are the cheaper ones dusty?

I have NA-M's on my car but they are Dust Free. So I cannot comment what the cheaper ones will be like. We have not had any compliants about the cheaper ones being dusty.

The Dust-Free models use the M compound which are for mainly street use where you want lower noise levels but retain the performance as much as possible. It helps to keep the wheels clean too.

"Part of the Non-Steel Series, Endless uses a Non-Steel Developmental Process with a new, mild ceramic material to increase rotor friendliness. With no steel materials, dust is minimal and rusting is prevented"

Taken from Endless USA

I hope this helps



  • Similar Content

  • Latest Posts

    • Hi, SteveL Thank you very much for your reply, you seem to be the only person on the net who has come up with a definitive answer for which I am grateful. The "Leak" was more by way of wet bubbles when the pedal was depressed hard by a buddy while trying to gey a decent pedal when bleeding the system having fitted the rebuilt BM50 back in the car, which now makes perfect sense. A bit of a shame having just rebuilt my BM50, I did not touch the proportioning valve side of things, the BM50 was leaking from the primary piston seal and fluid was running down the the Brake booster hence the need to rebuild, I had never noticed any fluid leaking from that hole previously it only started when I refitted it to the car. The brake lines in the photo are "Kunifer" which is a Copper/Nickel alloy brake pipe, but are only the ones I use to bench bleed Master cylinders, they are perfectly legal to use on vehicles here in the UK, however the lines on the car are PVF coated steel. Thanks again for clearing this up for me, a purchase of a new BMC appears to be on the cards, I have been looking at various options in case my BM50 was not repairable and have looked at the HFM BM57 which I understand is manufactured in Australia.  
    • Well the install is officially done. Filled with fluid and bled it today, but didn't get a chance to take it on a test drive. I'll throw some final pics of the lines and whatnot but you can definitely install a DMAX rack in an R33 with pretty minor mods. I think the only other thing I had to do that isn't documented here is grind a bit of the larger banjo fitting to get it to clear since the banjos are grouped much tighter on the DMAX rack. Also the dust boots from a R33 do not fit either fyi, so if you end up doing this install for whatever reason you'll need to grab those too. One caveat with buying the S15 dust boots however is that the clamps are too small to fit on the R33 inner tie rod since they're much thicker so keep the old clamps around. The boots also twist a bit when adjusting toe but it's not a big deal. No issues or leaks so far, steering feels good and it looks like there's a bit more lock now than I had before. Getting an alignment on Saturday so I'll see how it feels then but seems like it'll be good to go       
    • I don't get in here much anymore but I can help you with this.   The hole is a vent (air relief) for the brake proportioning valve, which is built into the master cylinder.    The bad news is that if brake fluid is leaking from that hole then it's getting past the proportioning valve seals.   The really bad news is that no spare parts are available for the proportioning valve either from Nissan or after market.     It's a bit of a PITA getting the proportioning valve out of the master cylinder body anyway but, fortunately, leaks from that area are rare in my experience. BTW, if those are copper (as such) brake lines you should get rid of them.    Bundy (steel) tube is a far better choice (and legal  in Australia - if that's where you are).
×
×
  • Create New...