Jump to content
SAU Community

Recommended Posts

just out of curiosity is it possibleto get the seat rails seperatly and if so how much????

Cheers Jimmi

Hi Jimmi, the included universal seat rails only come with the seats.

Regards,

Steve

  • 1 month later...

Hi Paul, this offer is still available :blush:

We don't actually offer pre-made rails unfortuantely, but most reputable workshops/fabricators should be able to modify the rails to suit your vehicle.

Cheers,

Steve

are they only available in leather? or can they still be had in fabric...

Hi mate, thanks for your enquiry.

We have both Leather and Mesh Fabric types available.

Cheers,

Steve

2. All black

blackleathrecarotype.jpg

The above seats are available for online purchase right now via our website using the URL below:

http://www.justjap.com/parts_nseats.htm

Cheers,

Steve

hi Steve..

when's the offer on till?i'll only be getting my car end of next week..but am tempted to get a pair of these black leather ones :)

hi Steve..

when's the offer on till?i'll only be getting my car end of next week..but am tempted to get a pair of these black leather ones :D

Hi mate, we will be continuing these prices for a while so don't worry - Pm me or drop by the store when you are ready to go and we will look after you.

Cheers,

Steve

Hi do you have a recommended place to get the rails done and a rough price figure?.. rails is the only thing stopping me from buying these seats!

Hi Aarlan, you could try Grey Imports.

Regards,

Steve

Hi mate, we will be continuing these prices for a while so don't worry - Pm me or drop by the store when you are ready to go and we will look after you.

Cheers,

Steve

thanks Steve..will let u know :)

Edited by GReddy_ES8

Hi Steve,

Purchased a few things off you on NS.com...

Was wondering actually what these are like to drive in?

Im tossing up whether to use these or a fixed seat, my car isnt a full time drifter, but sees some occasional slide time.

Not too worried about mounting them, thats easy enough, just wondering what they'll hold me like? Are the sides and leg bolsters firm like Genuine recaros?

Cheers,

Ben.

Hi Steve,

Purchased a few things off you on NS.com...

Was wondering actually what these are like to drive in?

Im tossing up whether to use these or a fixed seat, my car isnt a full time drifter, but sees some occasional slide time.

Not too worried about mounting them, thats easy enough, just wondering what they'll hold me like? Are the sides and leg bolsters firm like Genuine recaros?

Cheers,

Ben.

Hi Ben, the feedback we receive from our customers is that these are very comfortable to drive in. The design and support is virtually identical to the Recaro SR3 recliners so for a streeter with the occasional drift outing I would be going for a pair of these rather than a set of fixed back seats :thumbsup:

If you have any further questions please don't hesitate to ask

Cheers,

Steve



  • Similar Content

  • Latest Posts

    • Have you done the Ignition Sync Wizard in the AEM software?
    • Find out what RPM it was idling at with the IACV unplugged. It's very weird that the rpm didn't change at all, and then it stalled. When it stalls is it nearly like a switch off, like you've turned the engine off? Or is it more stutters and sputters and coughs to death over a few seconds? Or does the RPM just slowly keep going down and down? Have you done a test of trying to start it with the AFM unplugged? Does it still die?     If you Follow Josh's advice on using Nistune to check the voltages (which is a perfect method!) if you see anything out of wack voltage wise, THEN get the multimeter out and read the voltage directly at the sensor. If the two vary, then you're now looking for a wiring issue vs a sensor issue. So be aware, what the ECU sees, may not be what the sensor is actually saying too...
    • You very likely need to get it on a dyno and tune it. My assumption is, you've got an RB25DET tune in it, which has a different manifold, different injectors, and different cams as a minimum. What O2 sensor are you running?   When you say it runs extremely rich from idle all the way to redline, is this just free revving it you see that?
    • I seem to the be only person that is using a Haltech 2500 on an NA motor, I've installed a Bosch DBW throttle body to the OEM intake manifold and am having problems maintaining AFR even with the wideband o2.  It will run extremely rich at idle and up to redline, but under load it will go extremely lean in the 20s and i'm essentially having to rev it over 4k and feather the clutch to get it up to speed.  I've read a few other threads of about the butterfly, it seems removing the vacuum to it is supposed to have it remain open, i've noticed no difference under 4k with the vacuum line to it plugged.  I'm hoping someone here has had luck using the NA manifold with Haltech, and if they happen to have a tune for it.  
    • I don't know any details, but I really wouldn't be surprised if they do it as a LHD only version, at least initially.
×
×
  • Create New...