Jump to content
SAU Community

Recommended Posts

Hey, all. For those who took M2 citybound this morning, did your tag beep? Mine didn't as I went through the new toll plaza (drive through, no booths). I remember there was a hotline for those who think that their tag didn't work but I couldn't find it.

I called the RTA E-Toll(application) hotline and spent 25 minutes on hold(!!!) on my mobile (!!!). Then I hung up and called RTA number, got on the operator and she transferred me to the SAME QUEUE as I was before. I think I heard Dr. Carl about 20 times telling me to slow down. As that was happenning I went to the M2 site, which was down for half of the morning and found this pearler:

Q.: What happens if my tag doesn't work?

A.: Speak to your tag supplier.

F*ck*ng thanks.

So, my theory is that the tag readers do not work and they are having an influx of people calling them. Anyone?

Link to comment
https://www.sau.com.au/forums/topic/106978-m2-this-morning/
Share on other sites

yeap thats exactly wat u do. i work at one of these tag companies and evn though we're not supposed to tell you (ahAHAHAHHA) well im telling all u out there now...IF TAG DOESNT BEEP...DONT GIVE A ..BEEP (sH!T) ...if u hav a tag....a letter (Deferred Toll Notice aka DTN) will be sent out to the person in which the vehicle is under, and just whack in your tag serial number and account number on the lil pay slip and send it back. that way....u dont pay no fines hehahe sshh....this is just btween us okies ;)

Link to comment
https://www.sau.com.au/forums/topic/106978-m2-this-morning/#findComment-1983740
Share on other sites

I've been thru a couple times with the old set up on the M2 and the alarm went off, never got a letter

you will now, Sam

the new gantry's are up and running, and Hills Motorway has started infringing people.

(PS. I also work for one of the e-tag providers)

Link to comment
https://www.sau.com.au/forums/topic/106978-m2-this-morning/#findComment-1990619
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Guys since i bought r33 gts25t coupe 1994 automatic a/t(manual swap 350z gearbox)  all i got is problems, always problems. Lets start with that when i turn key into ignition(ON) fuel pump doesnt always works. Sometimes i have to turn key twice Off/on/off/on until it primes. Its new, dw300 - 340lph. My gearbox broke so i did gearbox swap, install different intake manifold, injectors and i take pipes. Car was sitting in garage for more than half a year. I did assembly all not that long ago and when i turn ignition cant hear prime. All of sudden it stopped working. Theres many videos on YouTube how to make relay mod on r33 straight from battery so i did and it doesnt work! 😰 30 - battery positive  87 - positive from fuel pump to relay 85, 86 - one of two wires from original fuel pump wires(light blue, grey) and it didn’t work. so I check on ignition and took original BLUE relays wires from trunk, next to fuses. (I believe it’s IGN+ and ECU pin 18. it didn’t work…  tried connecting (IGN+ from og relay) and (ECU 104 from 1of4 FPCM wires) to my new relay 85/86 and it didn’t work.  I unplug FPCM. Didn’t work. im thinking what’s wrong   fuel pump is working, if I leave IGN+ on 85 and 86 straight to ground it works but it’s just nonstop. Since it getting constant 12v after key in ON. light blue wire gives me 6-8v.  so how this should be connected? What causing ECU not giving — on pin? Or I did sth wrong and that’s why it doesn’t work? I need negative signal on ECU that control fuel pump. What this should be?
    • You can use your VIN to look up the factory part number somewhere like amayama, and then look to order new if necessary. https://www.amayama.com/en/genuine-catalogs/nissan Depending on price you might want to rebuild instead. @GTSBoy I had an interesting insight into US market parts when the Titan rear calipers were sticking. New calipers were dirt cheap, about 20% more than a rebuild kit....they are just considered throw away maintenance items
    • Funny, but really not funny. Thank god (most) f the world has moved on since then
    • Lots of votes for driving onto a plank first; that is the quickest way I've found, 25mm is enough for my case but that will vary by car It also depends where you are going for. On the 32 I can get to the rear diff with my floor jack if I do that end first, and get it up on stands. Then I lift the front from either front tow hook as high as needed, also onto stands. Sometimes I need a small lift on the other tow hook to get it level enough If I do the front first I can't get to the rear diff because of the angle of the car Other options are getting to the front mount of the rear subframe from in front of the wheel (if only lifting one side, or just do both which is a bit of a pain compared to one lift from the diff), or also the gearbox cross member mount on the driver's side if you are  just trying to lift the driver's side. I This is the jack I use; it says 75mm clearance but of course that is only on the lower section so if you have to reach too far in like the diff you still get stuck. https://www.snapon-bluepoint.com.sg/category/Floor-Jacks/product/Floor-Jack,-2-Ton-Low-Profile
    • On the bright side, the weather will turn much nicer for working outside shortly....sounds like you might need to start on a neighbour's garden next
×
×
  • Create New...