Jump to content
SAU Community

Recommended Posts

Guys,

I'm hoping someone can help.

Today I disconnected the battery so I can install a new fuel pump. That took three hours so the battery was disconnected for that time.

When I reconnected the battery, the car wont start. That is the pump isnt priming and no lights on the dash when I try to crank it.

The alarm light doesnt even blink like it usually does, it is a three point alarm. I have disconncted the alarm's black box, and tried another battery.

I have also tried disaraming the alarm from the alarm manual

Has anyone ever experienced this? Any help appreciated

Thanks

Hey man.

Ok first make sure your battery connections are on VERY tight. Believe it or not, if they are'nt tight the car may not start. So do that and turn the key two clicks and see if the lights on the dash come on and your fuel pump turns on. If so, the car should start up fine.

If not, check all your fuses in the engine bay and inside the car and use a test light on either side of the fuse to ensure one or more is'nt blown. You will probabley have to try them all and that does mean turning the key a click or two (depending on how the fuse is set to come on) to do this.

If that all checks out, well then you have a worse problem but lets not think like that yet. Try this and let us know.

Good luck man.

Cheers >_<

Yep just checked the battery connections and tightened it all and checked all fuses too. The ones in the boot, under the dash and in the engine bay, none blown

Whats worrying is that the dash lights dont even come on. The alarm light isnt blinking so I dont know what the status of the alarm is and I need it to blink to enter in the alarm override code.

Is the alarm cutting the ignition switch and electrics? Theres no lights on the dash at all. The radio, water spray, headlights and mirrors work but it wont allow me to wind my windows up.

That definitely sounds like a fuse. If you disconnected the battery and accidentally tapped the terminal with the cable, that could have been enough to blow one or more fuses.

As sidewayz said - use a test light to check continuity. If you haven't got one, a pair of pliers and 20 mins to check each fuse

Ok I'll pick myself up a test light tomorrow and do a more thorough check. I only pulled out each fuse and checked it by eye so far. i hope its not something more serious

Thanks for your help guys

Could there be any more possibilities or anything I can check?

Edited by Gengis

Primordial, it turns out I did have a burnt fuse, its the one in the boot, third one from the bottom its a 10A !

I replaced it with a spare in the fuse box under the dash but its still having the same problem!

Any other fuse boxes in the car? so far I've checked boot, the one in drivers side dash and the the one in engine bay near washer bottle.

Edit- found out the burnt fuse was for rear tail light. I checked all other fuses too with a multimeter and its all fine...

Edited by Gengis

Problem has been fixed, it turned out that my alarm was totally farked.

It was cutting off all ignition in the car and wouldnt come back online when the battery was reconnected

Auto electrician came to rewire it back to bypass the alarm and its all good! (except the alarm going shopping for a new one now)

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • would a r34 gtr hood line up with gt/gtt stock fenders? after latch, front bumper and hinges are swapped for gtr ones? or would the fenders be too low or high in relation to the hood surface? ( I believe seeing somewhere that gtr front fenders use some type of riser for the sides, but do not know how that relates to stock gt/gtt fenders.)    
    • You just need to remove the compressor housing, not the entire turbo. I would not be drilling and tapping anything with the housing still on anyways. 
    • So, I put my boat on a boat. First of all, I'm going to come out and say it. Why is Tasmania not considered a holy goal, an apex that all road-legal modified cars go to, to experience? This place is an absolute wonderland of titanic proportions. If people are already getting club runs for once in a lifetime 30 person cruises to Tassy then I've never seemed to see it. It is like someone replaced the entire place with an idyllic wonderland for cars, and all of the people living there with paid actors who are kind, humble, and friendly. Dear god. After doing a lap of almost all of the place I've found that it's a great way to find out all of the little things that the car isn't doing quite right and a great way to figure it all out. All in all, I drove for 4 hours a day for a week and nothing broke. I didn't even need to open the engine bay. This is by all means a great success, but it has left me with a list of things to potentially address. I also now have a 3D printed wheel fitment tool which annoyingly hasn't got any threads in it to actually assemble it. I might be able to tape it together to check the sizing I actually want to use, but it'll likely involving pulling the shocks out to properly measure travel at least at the front, and probably raise the car while I'm at it, at least in the rear. I scraped on quite a few things and I'm not sure how else to go about it. I was taking anything with a bump at what felt like 89 degree angles. And address those 10 other tasks. And wash the car. God damn it is dirty. And somehow, the weather was perfect the entire time - And because I was on the top of Mt Wellington it turns out it was very much about to freeze up there. I did something I typically never do and took some photos up there in what must have been -10 and the foggy felt like suspended ice, rather than mere fog. If you own a car in Australia, you owe it to yourself to do it.
    • Damn that was hilarious, and a bit embarrassing for skylines in general 😂 vintage car life ey. That R33 really stomped. Pretty entertaining stuff
    • Hi, I have a r32 gtr transmission. Does any of you guys have an idea how much power it will hold with the billet center plate and stock gearset? At what power level and use did yours brake with or without billet plate? Thanks, Oystein Lovik
×
×
  • Create New...